Series 2 2a 3 Fuel

Two Pin Gas CapSeries 2a-3 with Seal OEM. 1963-78.Also used on some Defender 110's

Locking Hasp for Fuel Cap, (Gas or Diesel).Fits Series 2-3. (Fuel cap not included).

Pick-Up Tube and Elbow for Side Gas Tank Series 2-3 88" and 109" Regular/PickUp,1958-84 Requires Gasket EG-ESR3277, not included.Supersedes: 503492

Fuel Filter - Diesel 2.25NA, 2.5NA, 2.5TD with Seals

Hose for Air Cleaner to Carburetor Elbow on 2.25L and 2.6LSeries 2 to 3.For the same Hose with Stainless Steel Clamps, see EF-517093K.

Fuel Gauge 12v Series 2a-3 1967-84 Negative Earth.Fuel Gauge and Fuel Sender need to match.This matches Senders EF-90560612, EF-623097 and EF-PRC3098.

Fuel Sender Unit Gas or Diesel Under Seat and Rear Tanks from 1967 until 1984.Series 2a-3, 88" 1967-84, 109" Station Wagons 1967-74 with Original R...

Fuel Tank Sender Unit, Gas, 88/109" Under Seat Tank 1967-84 OEMMade in the UKSeries 2a-3, 88" 1967-84, 109" Station Wagons 1967-74 with Original Re...

Fuel Sender with Pickup Tube for 109SW Rear Tank Suff C on (Aug/74) Gas.Note: To Install you may require both a clamp ring (EF-ARA1501L) and a rubb...

Fuel Sender Unit for 109SW Rear Tank Suff C on (Aug/74) Gas. OEM.Note: To Install you may require both a clamp ring (EF-ARA1501L) and a rubber seal...

Rubber Seal for Fuel Sender UnitFor 109 Station Wagon, Defender Side and Rear Tank to 1998.For the Twist Clamp, see EF-ARA1501L.

Clamp Ring for Fuel Sender For 109 Station Wagon, Defender Side and Rear Tank to 1998. For Rubber Seal, see EF-ARA1502L.

This is an under the seat mounted fuel tank that suits both petrol and diesel 88" Series trucks from 1958 through 1984. Also fits 109" up until Au...

Fuel Tank Fitting Kit for 88/109R Side Fuel Tank (552174)

Fuel Filler Tube Hose for 88" & 109" Regular Side Tank. For Series 2-3 88" and 109" Side Fuel Tanks See EF-543764K for Hose with Clamps

Breather Hose for Side or Rear Fuel TankFor 88" and 109" Series 2-3, and Defender up to VIN: MA159806, (1983-98)Can also be used for the 109 Rear T...

Fuel Filler Tube Hose for 109" LWB Series 2-3 Rear Tank.Notes: Requires HC-TS52-12-SS and HC-TS32-12-SS Clamps (see below links).

Gasket for Fuel Pump to Engine Block 2.25L Gas/Dsl S 2-3

Diesel Fuel Pump 2.25L and early 2.5L Dsl with Gasket. For 2.25L Diesel from Engine Suffix K onwards, (May 1967on).

Fuel Pump - 4Cyl 2.25L Series 3 (no glass sedimentor)

Fuel Pump Rebuild Overhaul Kit for Series 2-3 Slotted Stem Shaft.This will NOT work with Notch-Type shaft fuel pumps... please don't try. See seco...

Fuel Pump Rebuild Overhaul Kit for Series 2-3 Notched Stem Shaft.This will NOT work with Slot-Type shaft fuel pumps. See second photo for more deta...

Fuel Pump with Glass Sediment Bowl and Gasket, OEM. 2.25L Gas 1958-84. 2.25L Diesel to Engine Suffix J Inclusive (to April 1967).

Fuel Sedimentor Assembly, Diesel, OEM Delphi.For Series 2a-3, from Engine Suff K, (Mar/68 on), Defender to VIN: XA159806, (1999), Discovery 1 and R...

"Diesel Only" Plate for Fuel Inlet.For Series 2 to 3, and Defender to 1997. Can be used on Defender after '97 but you will need to drill holes to m...

Fuel Tank Gas or Diesel Rear for 109 Station Wagon 72on, 109 Regular 2-Door Aug 1974 on.Earlier Tanks are no longer available. To fit this on earli...

Gasket for Fuel Sender Unit Gas Tank Series 1-3 (Fiber)

Fuel Filter for Series 3, LR 90/110 Gas, on Bulkhead or Rail For Series 3 2.25L Gas on Bulkhead, and Early Defender V8 & 2.5L Gas. For 2.25L, 2...

Diaphragm for Crankcase Emissions Vent Control (PCV Valve)For Late Series 2a and Series 3 For the Complete Assembly, see EP-RTC6855.

Crankcase Emissions Vent Control (PCV) Assembly For late Series 2a and Series 3. For the Diaphragm Only, see EP-RTC6855DIA. Supersedes EF-542410.

Fuel Pipe Tank to Pump 88/109 Forward Tank Series 2-3 1958-84For the Fuel Line that runs from the Pump to the Carburetor, see EF-557432, (for Solex...

Fuel Pipe Tank to Pump 109 Station Wagon Series 2-3. Rear Tank.For the Fuel Line that runs from the Pump to the Carburetor, see EF-557432, (for Sol...

Fuel Pipe Pump to Zenith Carburetor OEM For Series 3 1972-84, (or conversions from Solex to Zenith or Weber Carburetors).Made in UK You may also ne...

Fuel Pipe Short Connecting Fuel Line to Zenith Carburetor For Series 3 1972-84, (or conversions from Solex to Zenith or Weber Carburetors). You may...

Breather Cap on Non-Vented Filler Tube 2.0L/2.25L Series 1-3 with Label.For Non-Ventilated Oil Filler Pipes. Series 1 Engine 26100201, (1952), onwa...

Breather Cap on Rocker Cover 2.0/2.25L Gas Series 1-3. With Label. No Emissions Pipe. Fitted to Engines upto Prefix 901 & 904 Suff B. For Seri...