Products

It's not a beanie, it's a toque, eh? 3 Brothers ribbed knit toque in smoke gray, featuring a customized faux leather patch (animal lovers rejoice!...

Our classic 3 Brothers Shop T-Shirt, now in kiddo sizing for all the young enthusiasts in your life. Small, (Size 6 to 8), Medium, (Size 10-12), La...

3 Degree Castor Correcting Heavy Duty Front Radius Arms 44mm Wide. PAIR. For Defender from 1994on, Discovery 1 '94on, and Range Rover Classic from ...

3 Degree Heavy Duty Front Radius Arms 38mm Wide. PAIR. For Front, Defender up to 1993, Discovery 1 to '93, RRC to '85. Requires Bushings 4x SS-NTC7...

3-Door Glue-On Seal Kit for Series 2-3 88/109" Does the 2 Front and Rear Safari Door on an 88" or 109" Regular/Hard Top. Includes enough cut-to-len...

3-Hole Wiring Grommet for Main Harness through Bulkhead OEM.For Series 3 and Defender.

3-Piece Coolant Hose Kit for Defender 300TdiClamped-Type Bottom Hose.All Hose Clamps are Included.

3-Way Male Water Proof Connector For NAS LED Brake/Tail Lamps to Connect to 1995on Defender Wiring Harness.

Want to gift someone something for their Landy but you aren't sure what?  This gift card will fix that for you.  Available in a variety of denomina...

Show your love for your fav Land Rover supplier by sticking these bad boys on whatever you’ve got.Each Sticker Pack contains 3 individual stickers....

Another sticker pack for your Landy, toolbox, fridge, laptop, pet, you name it!.Each Sticker Pack contains 3 individual stickers. Sticker Pack 2 co...

Our third of three sticker packs to show off your 3BCR loyalty. Each Sticker Pack contains 3 individual stickers. Sticker Pack 3 contains 1 Circle ...

3M Weatherstrip Adhesive # 8011 Black 147ml ** Alternate to TL-37532LOC Loctite Black Weatherstrip Adhesive 5 fl oz **

4-Door Glue-On Seal Kit for Series 2-3 109" Station Wagon. Includes enough cut-to-length glue-on door seal for both Front and Middle-Row Doors, lef...

4 Wheel Drive Selector Rod for Series 1-3 1948-84.Note: This Uses 2x BN-3819 1/4" BSF Nuts, GT-561221 Spring, GT-215808 Clevis. If this is for an e...

5-Door Glue-On Seal Kit for Series 2-3 109" Station Wagon. Includes enough cut-to-length glue-on door seal for the Front, Middle-Row, and Rear Safa...

Valve Guide for Inlet Valves on 2.6L 6 Cylinder European Version. Not for Series 2a NADA 2.6L.Supersedes EP-504169.New Old Stock.

9" Clutch Cover Assembly Pressure Plate, 1948-69 Series 1-2a.For the Clutch Friction Plate, see CC-591704.For a Complete Kit with the Cover, Plate ...

9" Clutch Kit with Cover/Pressure Plate, Friction Plate, Bearing and Flywheel Bushing Kit 1948-69 Series 1-2a. Kit Contains CC-591704, CC-591705, C...

9" Clutch Plate for 1948-1969 Series 1-2a.For the Clutch Cover/Pressure Plate, see CC-591705.For a Complete Kit with the Cover, Plate and Flywheel ...

9.5" Clutch Cover Pressure Plate AssemblyLate Series 2a and Series 3, Defender with 2.5Gas, Discovery 1 2.0L MPI Gas Engine.

9.5" Clutch Cover Assembly Late 2a,S3,Def2.5G,D1 MPI OEM

9.5" Clutch Cover Assembly Series 2a 1964-71 Use with Clutch Plate CC-FRC2297 and Bearing CC-STC1130.

9.5" Clutch Cover Assembly OEM-AP Drive Series 2a 1964-71 Use with Clutch Plate CC-FRC2297G and Bearing CC-STC1130G.

9.5" Clutch Plate Optional 1964-71, Standard 1970-84 Late 2A, Series 3 Optional 9.5" Clutch used on NADA Gas/Dsl 88 and 109, 1964-71. Standard on D...

A-Frame Nudge Bar for Defender.Quality made Black Rubber A-Frame. Mounting Hardware, Fasteners and spot light brackets included. For Defenders with...

ABS Sensor Front Defender TD5 from XA159807 to 6A683617 (1999-2006). Fits either left or right side.

ABS Sensor with Cable for Front Left Hand or Right Hand Range Rover P38 1996-02.

Air Conditioning Condenser Frame Assembly with Fan for the Defender from 1999 until the end in 2016. For TD5, Puma 2.4l and 2.2L. OEM. Made in Sout...

Accelerator Cable for 2.5L Naturally Aspirated and 2.5L Turbo Diesel.For Defender LHD frm VIN: 267062.

Accelerator Cable 200Tdi LHD Defender 1989-94

Accelerator Cable Defender 110 LHD 2.25L Diesel. 46" Long.

Accelerator Throttle Cable for Defender 110 2.25L RHD and 2.5L LHD Naturally Aspirated Diesel up to VIN:267061.30" Long.

Accelerator Throttle Cable for Defender 90/110 with the 3.5L V8 Twin Carburetor, (including the NAS Defender 90 3.5L V8 Carb).You may require the c...

Accelerator Cable for Defender Left Hand Drive 300Tdi from VIN: MA939976, (1995).

Accelerator Pedal Pad Defender 1999on

Accelerator Pedal Pad for Disco1, RRC, 90/110 to '98

Acorn for Ignition High-Tension Leads Series 1-2a.Works with Washer EE-214279 (linked below).

Adapter for Clutch Bleed Pipe to Bleed Nipple.Fits Series 2a with the 2.6L 6 Cylinder Engine, Series 3 with the 2.25L, and Early Defenders.Genuine,...

Adapter for Door Window Crank Handle. For Defender to VIN: LA932527, (1994), and Range Rover Classic. For Window Crank DP-RTC3939PA. Requires Clip ...

Adapter for Intake Manifold to Zenith or Weber Carburetor.Includes the Nuts and Locks for the Carburetor to the Adapter. Requires Gaskets EG-278163...

Adapter for Locking Ring on Fuel Pump/Sender Def/D1/RR

Adapter for Oil Pipe on Oil Filter Housing 200/300Tdi SPECIAL ORDER: Please note this item is special order and there will be a substantial passage...

Adapter for Temperature Sender on Metric Cylinder Head. Series 3 from Engine 36123672B and 36407286B. 16mm Male to 5/8" UNF Female.

Adapter for Water Temp Transmitter on 2.25 Gas M/F UNF Series 2a-3, Engine Suff J onwards, (April '67 on). Required for Electric Water Temperature ...

Adapter for Wiper Arm 14.8mm Splined for 1/4" Round Shaft.Series 1-3. Comes with an Allen Hex Key for Fitting.

OEM Adapter for Wiper Arm 14.8mm Splined to 1/4" "D" Profile.Some Series 3 with the "D"-Profile Wiper Shaft. Also used on Defender up to VIN: 1A622...

Adapter for Wiper Arm 14.8mm Splined to 1/4" "D" Profile.Some Series 3 with the "D"-Profile Wiper Shaft. Also used on Defender up to VIN: 1A622423 ...