Products

Hose Clamp 1-3/8" - 2-3/8" Diameter x 5/16" Narrow Bandwidth Stainless Various Uses.

Hose Clamp 1/2" - 1-1/2" Diameter x 5/16" Narrow Bandwidth Stainless Various Uses.

Hose Clamp 1/2" - 1-1/4" Diameter x 1/2" Bandwidth Stainless Various Uses

Hose Clamp 11/16" - 1-1/2" Diameter x 1/2" Bandwidth Stainless Various Uses

Hose Clamp 2" - 3" Diameter x 1/2" Band All Stainless.For Various Uses.

Hose Clamp 2-1/2"-3-1/2" Diameter x 9/16" Bandwidth Stainless for Various Uses.

Hose Clamp 2-1/4"- 3-1/4" Diameter x 1/2" Bandwidth All Stainless Various Uses

Hose Clamp 2-3/4" to 3-3/4" Diameter x 1/2" Bandwidth Stainless Steel Band.For Various Uses.

Hose Clamp 3" - 4" Diameter x 1/2" Bandwidth All Stainless For Various Uses.

Hose Clamp 3/4" - 1-3/4" Diameter x1/2" Bandwidth All Stainless Various Uses.

Hose Clamp 3/4" - 1-5/8" Diameter x 1/2" Bandwidth.All Stainless - Various Uses.

Hose Clamp 3/8" - 9/16" Diameter x 5/16" Bandwidth, All Stainless, Various Uses.Used for In-Line Fuel Filters, etc.Supersedes HC-AAU1979, HC-PYC101...

Hose Clamp 40-60mm (1-1/2" - 2-3/8") for Turbo Hoses.For 200Tdi, 300Tdi and TD5 OEM. Defender, Discovery, and RRC.

Hose Clamp 7/16" - 1" Diameter x 1/2" Bandwidth Stainless for Various Uses

Hose Clamp 7/16" - 1" Diameter x 5/16" Bandwidth Stainless for Various Uses

Hose Clamp 7/16" - 1" Diameter x 9/16" Bandwidth Stainless for Various Uses

Hose Elbow for Crankcase Vent Control to Carburetor Adapter Port. For Some Early Series 3. Note: This is a 3" x 3" Rubber Elbow. Later Series 3 use...

Hose Elbow for Emission System, from Carburettor Adapter to Crankcase PCV Vent Control Series 3 up to Suffix C, (August 1974) Note: This is a 2" x ...

Hose Engine to Fuel Cooler Defender TD5 from '02

Hose from the expansion tank into the radiator.  Fits Defender 90, 110, 130 from 1998-2016.

Hose for Air Cleaner to Carburetor Elbow on 2.25L and 2.6L Series 2 to 3. For the same Hose with Stainless Steel Clamps, see EF-517093K (linked bel...

Hose for Crankcase Breather on 300Tdi.For Defender, Discovery 1, and RRC with the 300Tdi.

Hose for Radiator Overflow Bottle, Overflow Output.For Series 2a-3 with the Overflow Bottle, Defender 4 Cylinder Gas and 3.5L V8, and Discovery 1 w...

Land Rover Genuine Hose for Radiator Overflow Bottle, Overflow Output.For Series 2a-3 with the Overflow Bottle, Defender 4 Cylinder Gas and 3.5L V8...

Hose Connector for Zenith or Weber Carburetor to Air Cleaner Elbow For Series 2a-3 1968on, or earlier if converted to a Zenith or Weber Carb. If yo...

Hose from Heater Pipe to Oil Cooler TD5 Defender

Hose Fuel Cooler to Return Defender TD5 to VIN: 4A673266

Hose LH Valve Cover to Plenum V8 D1, RRC, P38, Def

Hose Manifold to Heater for 4.0L V8 EFI Disco1 Defender

Hose Oil Breather/Cyclone to Cleaner 300Tdi Defender

Hose Oil Cooler to Radiator Defender TD5

Hose Oil Rocker Cover to Oil Drain 300Tdi Def, D1, RRC

Hose Right Hand Valve Cover to Plenum V8 D1, RRC, P38, Defender

Housing for Door Lock Knob. For Defender 1987on, and Range Rover Classic from VIN: FA351847 on. For a Complete Kit of all 3 Parts, see DP-DA2499Kit...

Housing for Series 1-3 Gearbox Gear Lever

HT Ignition Lead Cable (Copper Core) Series 1, 48-1958. Sold by the Metre. Requires appropriate Split Brass Washers, EE-214279 and the Acorn Nuts, ...

Hub Bearing and Oil Seal Kit Defender. Fits both front and rear from 1994 onwards. OEM Note: The Kit DOES NOT Include Thrust Washer /Key Washer AD-...

Hub Bearing and Oil Seal Repair KitFor the Series 2/2a/3 88" from July of 1980. 109" from October of 1980

Hub Bearing and Oil Seal Kit Defender.Fits both Front and Rear from 1994 onwards.Note: The Kit DOES NOT Include Thrust Washer /Key Washer AD-FTC318...

Hub Bearing and Oil Seal Kit. For Defender Front up to 1993

Hub Bearing and Oil Seal Kit. Defender front up to 1993 OEM

Hub Bearing and Oil Seal Kit Defender Rear up to 1993

Hub Bearing and Oil Seal Kit. Defender Rear up to 1993 OEM

Hub Bearing and Oil Seal Kit Disco 1 Front or Rear frm '92on

Hub Bearing and Oil Seal Kit Discovery 1 Front or Rear up to 1992

Hub Bearing for Semi-Float Rear Axle Series 1, 1948-58. Semi-Float is determined by the Drive Flange and Axle Shaft being one assembly, as seen in ...

Hub Bearing for Series 3 1980 on, Defender, RRC and D1, NTN OEM. Supersedes: AD-RTC3429

Hub Bearing for Series 3 1980 on, Defender, RRC and D1, Timken. Supersedes: AD-RTC3429