Best selling products

Water Temperature Transmitter Sender Series 2-3, 2.25L 4-Cylinder and 2.6L 6-Cylinder 5/8" x 18 UNF thread

Panel Light Bulb Screw-In 12v 2.2w for Series 1-3 Instrument Panel Series 1 1954-58 requires 6 or 7. Series 2, 2a requires 6 to 8, depending on Aux...

First of a colour series, this 5-panel cap features a ‘felt appliqué’ vintage Land Rover front icon. Each letter is individually stitched down like...

Wheel Nut 15/16" Wide Series 1/2/2A, 1948-1969 Double-End.For a set of 20 Nuts, see AW-217361-20.For the Later 1-1/16" Wide Single-End Nut, see AW-...

Gearbox and Transfer Case Gasket Set - Series 1-3 1948-84

OEM Service Kit for Td5 Oil, Air, Fuel and Rotor Filters, Washer. Defender or Discovery TD5, 1999 to 2006.

Gasket Paper for Stub Axle Rear.For Series 1 through 3, from 1957 to the end of 1984.

Oil Seal for End of Front Axle Casing 1948-1984 Series 1-3

Gasket for Thermostat Housing, Lower.Series 2-3 from 1958 to 1984.

Champion Brand Spark Plug. N9YC. For Series 2, 2a, and 3 with 2.25L or 2.6L engines with 7:1 Compression Ratio.

Brake Light Switch, Series 3, 1971 to 1984 with Brake ServoAlso used as the Optional Reverse Light Switch on the Gearbox.

Sealing washer designed for differential and gearbox drain plugs. Positioned between the plug and the housing, it ensures a leak-tight seal across ...

Set of 3 Replacement Rubber Grommets for Series 2a-3 1967-84.Handbrake, Gear, and Transfer Lever.Handbrake has Oval Hole. This set can work for ear...

Brake Drum Screws Series 1-3 1948-1984 PACKAGE of 10.

Door Top Rubber Seal (Between Door and Door Top) Series 2-3

Wiper Blade for Defender Front (1983on) or Rear (1989on), up to 2016.Supersedes WW-PRC4278, WW-PRC8559 and WW-DKC000110pmd.

Slotted Drain Plug Tool for Series, Defender, and RRC.Uses a 19mm or 3/4" Socket or Wrench.For use on the Slotted Drain Plug, AF-235592.So much eas...

Rebuild Kit for Clutch or Brake Master Cylinder.For CV-Type 88" Master Cylinder 90569126, (Used as a Brake Master Cylinder on Series 2/2a 88" Singl...

Corteco Pinion Oil Seal Rover Differential Front or Rear.For Series 1-3 1950-84Supersedes AF-217507, AF-561360.

Lock Nut for Hub Bearing Front or Rear.For Series 1-3, Defender, Discovery 1 and RRC, from 1948 through to 1998.OEM Quality.Supersedes AD-217355, A...

Front Crankshaft Oil Seal Corteco OEM Fits, Series 1, 1.6 and 2.0L Series 2, 2a, and 3, 2.25L 4Cyl and 2.6L 6Cyl Defender, Discovery 1 and RRC, 2.5...

Brake Drum 10" Series 1 to 2A 1948-1969. 80", 86", and 88" Front and Rear. Series 1 107" with 10" Brakes.Note: Holes are 0.581", (a bit larger than...

Hub Bearing and Oil Seal Repair Kit. Fits Series 1, 1948 to 58, Front Axle. Fits Rear Fully Floating Axles on 109", and 88" with the optional full ...

Distance Piece Collar for Stub Shaft Front or Rear Axle Race for Hub Seal. OEM. Series 1-3 upto 1980 Series 1 Front Only up to 1956.

Mahle Oil Filter for Defender TD5 and Discovery 2 TD5 Engines.

Brake Kit Front Axle Set, 4 Cylinder, 86/88", 10" Brakes, up to June '80, Kit includes; 1x STC2796 10" brake shoes axle set 1x 243296 right wheel c...

Hylomar Universal Blue Gasket/Jointing Compound 100g Non-Setting Joint Compound.

Swivel Hub Oil Seal, The large seal for the front swivel balls.For Series 1-3, 1948-1984.For a Kit with the Seal Retainer and Correct Bolts and Nut...

Tie Rod End for Steering Track Rod, Drag Link or Longitudinal Tube.Left Hand Thread, Series 1-3 1948-July 74, Unthreaded Shoulder.See 2nd Photo for...

Radiator Cap for Series 2a-3 9lb Pressure Gas/Diesel. Includes Rubber Seal. Not for Series 1, Series 2 or Early Series 2a. See EC-217437 for Series...

Chassis Bump Stop Buffer Series 1-3 with Bolts and Nuts.

Gasket for Stub Axle to Swivel Hub Front, Series 1 to 3, 1954-84

Master Brake Cylinder CB Type.For 88" Short Wheel Base Series 2 and Early 2A, 1958-67, (Single Line System Without Brake Servo).

Screw for Fastening Speedometer Cable to Gearbox2BA x 1/4". Series 1-3. Typically 3 Required. You may need the Lock Washer, FS-WM702001L.NOTE: You ...

Hardtop Seal, Windscreen/Windshield to Hard Top.For Series 2-3 1958-1984, Regular, Station Wagon and Pick-Up Truck Cab Roofs. For the Windscreen to...

Thermostat Housing Gasket Rear Housing to Bypass,Series 2a to 3, 1961 Onwards.

Rubber Glazing Seal for Windscreen Defender 90/110

Shackle Bolt for Front-End of Front Spring and Front-End of Rear Spring 9/16" UNF For 88" and 109"

Corteco OEM Hub Oil SealFits Series 1, 1948 to 58, Front Axle. Fits Rear Fully-Floating Axles on 109", and 88" with the optional full float axles f...

Brake Light Switch, Hydraulic Pressure on Pipe UnionSeries 2 and 2aNote that this Switch has 1/8"NPTx27TPI and must be used on the 5-way union foun...

Clutch Alignment Tool Series 1-3 for 9" & 9.5" Clutch Plates

Tie Rod End, Set of 4.2x Right and 2x Left Hand, with Steering Rod Clamp Kits.For Series 1-3 1948-July 74, Unthreaded Shoulders.

Hinge Bushing for Hood (Bonnet),For Series 2a-3, 1972 on, Defender through to 2016,

Delphi AP Brake Pad Set Front. Defender 110 and 130 1986 onward. Defender 90 with Solid Rotors from 1991 to 2016. Defender 90 with Vented Rotors fr...

Tie Rod End for Steering Track Rod, Drag Link or Longitudinal Tube.Right Hand Thread, Series 1-3 1948-July 74, Unthreaded Shoulder.See 2nd Photo fo...

Front or Rear Brake or Clutch Hose, 86/88 107/109, 3/8" UNF.For use on:Series 1 to 2a, Front Brake, Left or Right, 86/88" SWB or 107/109" LWB, fro...

Voltage Regulator for Instrument Panel Series 2-3 1961-84

Copper Washer 3/8" for Brake or Clutch HoseFor Series 1-3, 1954-1984.