Best selling products

Connecting Rod Big End Bearing Set Standard.For 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi, and 300Tdi.OEM King.

O-Ring Seal for Hi-Lo Transfer Selector Shaft.For Series 1-3.Supersedes GT-265019 and GT-515572.

Heater Hose Valve to Pipe for Series 3 LH and RHD

Exhaust Assembly Bolt Kit for 88" or 109" 4 Cyl 2.25L Gas or Diesel Complete Bolt Kit and Gasket, (213358), for Assembling Exhaust System, (these ...

Set of 6 Original Door Hinge Pin Kits for Series 2 and 2a. Slotted Screw Head and Lock Tab Washer. For Series 2 to 3. Does 6 Hinges. For Stainless ...

Intermediate Pipe SWB 88 Fits: Series 2A and 3 SWB 88" all gas models, 1961-84. Series 3 SWB 88" diesel models from October 1973-85

Temperature Transmitter Coolant or Oil.For Coolant on Defender 2.5L Gas or Diesel up to VIN: FA358427, (to April 1989).For later, VIN: FA358428 to ...

Delphi Steering Ball Joint Lower Swivel for RR P38 D2

Delphi Steering Ball Joint Upper Swivel for RR P38 D2

Flange Head Bolt M8 x 85mm Various Uses OEM.Two required on 300Tdi Intake Manifold.

Washer Spring Lock 1/4" Washer Zinc.Supersedes BN-3074. Note: You are purchasing 1, not 10 as shown in the photo.

Bolt Rnd Head Metric M6x16mm (for Door Nut Retainers)

Set of 3 Stainless Steel Door Hinge Pin Kits For Series 2-3 or Defender 3-Hinge Rear Safari Door

Heater Defrost Hose Kit 1-1/4" Black Neoprene Hose with Clamps. For Series 2 Kodiak II Heater Left Hand Drive, 1958-61. These Hoses are the real th...

Window Channel Kit for Middle Door Series 2-3 58-84 1-Door

Floor Board LH 4-Cyl Series 2-3 1958-84 Aluminium. Made in UK! Finger prints included... Panels need to be sanded and primed with etching paint.

Floor Board RH 4-Cyl Series 2-3 1958-84 Aluminium Made in UK! Finger prints included... Panels need to be sanded and primed with etching paint.

Front Right-Hand Door Rivet-On Rubber Seal Kit for Series 2-3 88"/109" Rivet-On Door Seal Kit. Original-Style Rubber Strips with Metal Inserts. Pop...

Heavy-Duty Door Mounted Mirror Arm, (for Series 3 Doors, 1971-84)Use with GM-DA2130 7"x5" Mirror Head and Series 3 / Defender Upper Hinges with Mou...

Front or Rear Brake Hose for Series 1 80" 1948-1953 7/16" UNF. For use on; Series 1 80" Front Left or Right, and Rear from 1948 to 1953. Also used ...

Rebuild Kit for CB-Type Master Cylinder.For Series 2, Early 2A 109" Long Wheel Base with BB-564706 Brake Master Cylinder.

Set of 5 Sawtooth Black Diamond Cut 16"x7" Alloy Rims Defender, Discovery 1, RRC.1994on, will not fit Defenders with rear drum brakes. With Land Ro...

Door Lock Cylinder Barrels and Keys, 4 Sets, with 8 Matching Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Doo...

Terrafirma Security Metal Cubby Box with Cup Holders Black.Designed to keep your valuables locked up and safe, but still accessible. This steel cub...

Bolt for Bonnet Spare Wheel Carrier Mounting. OEM.1/2" BSF x 3" Long. Works with Clamp BP-347262.

Door Lock Cylinder Barrels and Keys, 3 Sets, with 6 Matching Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Doo...

Fog Lamp Assembly Red RectangularEuro Spec Defender to VIN: WA159806, (1998).For Later, see LA-XFE100170 (linked below).

Rear Suspension Bushing and Bolt Kit. For Defender from 1992 to 2009, Discovery 1, and Range Rover Classic. Includes the bolts for the A-Frame and ...

Shock Absorber PR2 Pro Kit for 109" Standard Front and Rear.Includes 4 Shocks and the Required Bolts, Nuts and Washers to Mount them.Fits Series 2-...

Bolt Kit for Swivel Ball Flange to Axle.This is an Axle Set; does both Left and Right Sides.Series 1-3, 1948-84.

Black Seal/Mat Retainer for Rear Safari Door Lower Floor Seal, Made in the UK.This is the Later Series 3 and Defender Seal Retainer; earlier Series...

Lock Nut for Brake Hose 7/16". Series 1 48-53, Series 2, 2a, 3, Land Rover 90/110, Defender Clutch Hose.

Gearbox Bearing Kit for Series 1-2a, Suff A. This is a five piece kit that will fit trucks right from the beginning in 1948 up until 1963. Includes...

Rubber Washer for Fuel Tank Mount Brackets.Fits Series 2 to 3 88 and 109 Side and Rear Tanks. Defender 90 Side Tank to 1998.For a Complete Fuel Tan...

Cable for Heater Air Distribution Upper/Lower Control.For Series 3 and Defender up to VIN: 1A616951, 2001.For the later cable, see HS-JFF000120 (li...

Heavy-Duty Defender Rubber Mats Foam-Backed R380 RH and LH Pair. From 1993 to 2006. Contains BTR7897 and BTR7898.

Strap for Windscreen Inner Hinge Mount Defender Note: From JA912346 (1992). For earlier see BP-RTC6159.Supersedes: BP-MUC4290, BP-LR016671

Anti-Burst Door Handle Kit for Series. Does the 2 Front Doors and the Rear Safari Door. Everything needed to convert the old Slam-Type handles to t...

Washer Flat 5mm ID, 12mm OD, Zinc, Various Uses.Note: You are purchasing 1, not 10 as shown in the photo.

Bolt 3/8" BSF x 1-3/8" for Swivel Lock Stop, Rear Brake Plate/Stub Axle, Lower Steering Arms to Swivel Housing up to '66, and Series 1 Flywheel Hou...

Nut 7/16" BSF Nylon LockFor U-Bolts up to Suffix C, Original BSF Top Shock Bolts, and Various Uses. Note: You are purchasing 1, not 20 as shown in...

Air Filter for Defender 90/110/130 300Tdi.

Round Head Slotted 1/4"-28 UNF Bolt for Various Uses. Note: You are purchasing 1, not 10 as shown in the photo.

5-Door Glue-On Seal Kit for Series 2-3 109" Station Wagon. Includes enough cut-to-length glue-on door seal for the Front, Middle-Row, and Rear Safa...

Terrafirma All Terrain Medium Load 2" Lift Suspension Kit. Spring and Shock Kit for Defender 90, Discovery 1, and Range Rover Classic.

Brake Front 5-Way Union Fitting for 88" SWB and 109" LWB 1958-69 Brass. 4x 3/8" Imperial UNF female, and 1x 1/8"NPTx27TPI for Hydraulic Brake Switc...

R435 Voltage Regulator Spade Connectors, Series 2A from April of 1963 to 1966 Spade-Type Connectors. For use with Dynamo, (Generator).

Bolt 7/16" UNF x 6 1/2" for Shock Absorber Top, OEM.For Series 1-3 Front or Rear 86" and 88".For Series 1-3 Front 107" and 109".Requires Nut BN-NY6...