Best selling products

Heater Hose Heater Core to Block RHD Series 3

Barrel Locks and Keys 3 Sets for Series 2-3 Doors.Fits Slam Type Handles 337801 and 337802 and Rear Safari Door.Keys are all Matched.

Lower U-Joint for Steering Shaft. For Defender to VIN: VA133508, 1997, RRC to VIN: MA601606, and some Discovery 1's to VIN: HA002271. Requires 2x B...

Heater/Glow Plug for TD5 Engine OEM Beru. Made in Germany. For Defender and Discovery 2's with the TD5 Engine. 4 Required, not 5. Guess they didn't...

Filler for Rear Upper Front Door Glass, or Front or Rear Middle Door Glass Defender

Denso Starter Motor for Defender TD5 or Discovery 2 TD5.Made in Japan.

Door Seal Bottom Middle 2nd Row Left or Right Hand Defender 110/130.Rivets to Door Bottom. From VIN LA933877 to 5A696476 (1994 to 2005 MY)Requires ...

Bolt Kit for Series 2, 2a and 3, 1969 to 84, Right and Left Hand Mud Shield Splash Guards. Correct Fasteners for Doing Both Sides for LHD and RHD. ...

Clutch Release Fork Kit. For Defender V8 and TD5 with R380 Gearbox. All the Little Bits and Pieces that You Will Need to Replace the Clutch Fork.

Washer Flat 1/4" SAE ID 7/16"OD Zinc for Steering Clamps. OEM. Note: You are purchasing 1, not 10 as shown in the photo.

Replacement Cap for Brake or Clutch Master Reservoir, BB-271581, BC-504105G, BB-90577520, BB-569701, and CC-STC500100.Supersedes BB-260819, BB-5002...

Brake Kit Rear Axle Set Defender 110/130 up to KA930545(1993).

Universal Joint Front Propshaft Defender 2001-06Specifically Used on Front Heavy Duty Propshaft AP-TVB100610, (sold as a replacement for most Front...

Wiper Arms and Flat Blades Kit Center Park S 2a-3 1967-84

Pin Fitment Kit for Deluxe Seat 88/109" Non-Adjustable Seat Frame

Bolt and Nut Kit for 109" Shocks Front/Rear Series 2-3.

Steering Rod Kit for Series 2a to 3, 1962 to 1984 with Greaseable Ends. Complete with Track Rod SC-NRC132 (43-1/8") and Drag Link SC-NRC4609 (28-3/...

Check Rod for the Rear Safari Door on the Series 2, 2a, 3 and early Land Rover 90/110's. Sometimes referred to as a "limit arm" or "rear door stay"...

Set of 5 Sawtooth Alloy Wheel Black 18"x8" Complete with Black Land Rover Genuine Center Caps and Black Wheel Nuts. Fits Defender 1994 on, Discover...

Door Lock Cylinder Barrel and 2 Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Door to 2001, and early Defender...

Door Check Strap Front Door Left Hand Plate TypeFor Defender 1988on.Requires Clevis Pin GT-PC108322, Flat Washer BN-WA108056 and Split Pin FS-BYC50...

Door Check Strap Front Door Right Hand Plate TypeFor Defender 1988on.Requires Clevis Pin GT-PC108322, Flat Washer BN-WA108056 and Split Pin FS-BYC5...

Nut Metric Nylon Lock 10mm for Engine/Gearbox Mounts. Price is per 1, not 10 as shown in the photo.

Bolt 3/8" BSF by 1" Long.Front Stub Axle to Swivel Hub, Front Brake Plate to Swivel, Set Bolt for Rover Differential Crown Wheel.

Round Blanking Plug 3/4" Diameter for Defender Bulkhead Redundant Wiper Spindle.For Defender up to VIN 1A622423 (2001MY). 2 RequiredFor 2002 on, se...

Stainless Steel Extended +40mm (1.6") Brake Hose Kit Series 3 88-109"

Rear Shackles Kit for 109" 1 Ton Military with Center Tube, Bolts and Nuts.PAIR - 2 of what is shown in the Photo, Plus the Bolts and Nuts for the ...

Washer Jet Assembly PAIRFor Series 2a and 3 from 1968, and Defender up to 1987.

Inner Door Handle Left hand side for the Land Rover 90/110 (from 1986 onward), Defender and RRC 2-Dr from 1989 onwards.

Shock Absorber Rear 109" 1-Ton w/Bushings

Valve Guide Exhaust for 2.25/2.5L Gas 1969 on OEM-AE

Adapter for Temperature Sender on Metric Cylinder Head. Series 3 from Engine 36123672B and 36407286B. 16mm Male to 5/8" UNF Female.

Brake Shoe Anchor Plate for 86/88" Series 1-3 1952-84 Defender 90 to 1993

Spire Nuts for Floor Screws and Other Uses

Anti-Burst Door Handle Kit for Series 2-3, Does the 2 Front Doors. Everything needed to convert the old Slam-Type handles to the later Anti-Burst h...

Universal Self-Adhesive Noise Dampening Shim Pads.Set of 4 by Mintex, Made in Denmark.Manufactured from wolverine; cut to shape and applied to the ...

Canvas Top 88" Full Hood with Side and Rear Windows Sand, for Series 2 to 3.All Wheel Trim Product. Long-Lasting, Excellent Quality!

Solex 32PBI-2 Carburetor Service Kit 1.6/2.0L Series 1

Complete Exhaust System for Series 1 86/88" 2.0L 1954-58. This kit fits: Series 1, SWB 86" or 88" all Gas or Diesel models 1954 to 1958. The Tailpi...

OEM Front Door Left-Hand Rivet-On Rubber Seal Kit Series 2-3 88"/109" Rivet-On Door Seal Kit. Original OEM Rubber Strips with Metal Inserts. Pop-Ri...

Steering Drag Link with Damper Bracket, (28 3/4") Series 2, 2a, 3.Note on the Damper Bracket. In order to install a Steering Damper Shock, your Cha...

Lucas L488 Red Glass Lens

Front Vent Foam Rubber Seal for Series 3 1971-84 and Defender, (One Seal).Land Rover Genuine.Note that this is a foam rubber, (closed cell), seal w...

Door Latch Assembly Left Hand for DefenderFront Door Push-Style Handle For a Full Latch Kit, see DP-FQJ500250KIT (linked below).

Tappet Assembly (Lifter) for Series 2-3 2.25L Gas or Diesel, and the 2.5L for the Land Rover 90/110.

Valve Collet (Valve Keeper Half) for the 2.5L Gas or Diesel, 2.5L Turbo Diesel, 200Tdi and 300Tdi. OEM .Oddly, these are sold as one-half a collet;...

One Rear Axle Check StrapSeries 1-3 107/109" 2-Required, Series 2-3 88" Left Hand Only.For a Pair for the 88", see CP-CHKSTP88, or for the 109" see...

Filler Strip for Pick-Up Truck Cab Rear Corner Windows.OEM. For Series 2-3 and Defender to 1989, using 5mm or 4mm Glass.This is for Weather Strip S...