Defender Chassis Parts

Mounting Pad between Rear Tub Floor and Cross-Braces6 Required for Series 1-3 86"/88" and Defender 90 8 Required for Series 2-3 109" Station Wagon ...

Rear Cross-Member Bolt Kit Stainless Steel.Metric, For Series and Defender.To bolt the rear tub to rear body mounting bracket, (Puma style), and to...

Rear Axle Bump Stop Black Def 90/110, D1 94-98, RRC to95

Galvanized Stays for Front Wings PAIR Series 2-3, 88" and 109".

Rear Body Nut Plate and Fasteners for Series and Defender to 2002.Plate is Aluminium with Stainless Nutserts, Bolts and Washers Stainless Steel, Ri...

Rear body mount 3mm aluminium for All Rear Tubs. Fits Series 2 to 3 and All Defenders but the High Capacity. For the Chassis to Body Nut Plates, se...

Bulkhead Door Pillar Repair Section w Foot-Bracket Left Hand. Series 2-3 and Defender. If replacing a Series 2 to 2a door pillar which has encapsul...

OEM Engine or Gearbox Mount for 2.5L Gas or Diesel, 2.5LTurbo Diesel, 200Tdi Engines, or LT77 Transmission. Requires 2x BN-NY110047L 10mm Nylocs an...

Rear Floor Support 3mm Aluminium. Lower Tailgate at Floor.For Series 2 to 3 and All Defenders but the High-Capacity.Made in the UK.

Plastic Cap for Seatbelt and Bumper Bolt HeadsFor Defender, Discovery 1 and RRC.

Bulkhead Door Pillar Repair Section w Foot-Bracket Right Hand. Series 2-3 and Defender.If replacing a Series 2 to 2a door pillar which has encapsul...

Door Sill Rail Channel Right Hand Galvanized. Series 2-3 88/109R (Not 4-Door Station Wagon) Defender 90/110R (Not 4-Door Station Wagon)For Sill Rai...

Door Sill Rail Channel Left Hand Galvanized. Series 2-3 88/109R (Not 4-Door Station Wagon) Defender 90/110R (Not 4-Door Station Wagon)For Sill Rail...

Crossmember for rear tub to chassis for Series 2-3 and Defender.3 required for a 88/90", 4 required for a 109/110 Station Wagon, and 6 required for...

Rear Bump Stop Weld on Steel Bracket for Defender

Defender Tdi Tread Plate Rear Crossmember Cover

Front Axle Bump Stop Black 90/110 to97, D1 94-99, RRC to95

Rear Cross-Member Plates and Bolts Fastening Kit for Series and Defender to 2002. Includes 5x BP-YRM097A, (BP-MRC8736), Aluminium Nut Plates, 10x S...

Engine or Gearbox Mount for 2.5L Gas or Diesel, 2.5LTurbo Diesel, 200Tdi Engines, or LT77 Transmission. Requires 2x BN-NY110047L 10mm Nylocs and so...

Rear Body Support (Top Hat) Series 2-3 109 Regular, Defender 110 Hardtop/Regular 2 or 3 Door.Typically 3 Required.

Under Floor, Rear Tub, Front Support Crossmember for Series 2-3 109" and Defender 110 Station Wagons.Made in the UK Heavy-Duty Galvanized.For the A...

Rear Cross Member Long Extensions and Upright Body Brackets.For Defender 90 Pre-TD5, (1983-1998). Not for the NAS Defender 90.NOTE: This typically ...

Rear Crossmember with Short Extensions (200mm or 7"). For Defender 90 TD5 or Puma. With Bolt-On Type Body Mount Bracket. *Note: a $40 surcharge for...

Bulkhead Outrigger Right Hand.For Defender 90/110/130.

B-Post Bottom Repair Section Left Hand Outer Skin Rivet-On Seals for Series 2-3 5-Door Station Wagons.This is the Outer Skin Only.For B-Posts with ...

Front Bumper Defender 90/110 Galvanized No End Holes. For stainless steel bumper bolt kit see BN-DA1139, and for stainless steel bumper bolt kit wi...

Replacement Footwell Left-Side for Left Hand Drive For Defender 90/110/130 Bulkhead Made in UK

Bulkhead Repair Panel with Vent Right Hand Series 2-3 and Defender Note: Fitting to Series Bulkheads may require slight modifications.

Bulkhead Top Corner Repair Section Left Hand Series 2-3 and Defender

Bulkhead Top Corner Repair Section Right Hand Series 2-3 and Defender

Galvanized Body Support Bracket for Defender 110/130 Strengthen the structure of your Defender with this galvanized body support bracket, designed ...

Crossmember Rear Floor for 4 Door Crew Cab and 5 Door Station Wagon Defender 110. Hot Dipped Galvanized. Defender 2007 to 2016. Supersedes CP-KVB50...

Crossmember Rear Floor for 4 Door Crew Cab and 5 Door Station Wagon Defender 110. Black Prime Painted. Defender 2007 to 2016. For the Galvanized Cr...

Rear Cross Member for Defender 110 4 Door Crew Cab and 5 Door Station Wagon. 1983 to 2006. Comes with bolt on brackets. Not for Hi-Capacity. For th...

Rear Cross Member for Defender 110 4 Door Crew Cab and 5 Door Station Wagon. 1983 to 2006. Galvanized. Comes with bolt on brackets. Not for Hi-Capa...

Heatshield Left Hand Motor Mount Defender Td5

Rear Body Support (Top Hat) for Under Tub FloorFor Series 2-3 109 Station Wagon, Defender 110 Station Wagon.Typically 3 Required.

Rear Body Support (Top Hat) for Under Tub Floor. For Series 2-3 88", Defender 90. Typically, 3 Required.

Under Floor Front Support Crossmember for Series 2-3 109" and Defender 110 Station Wagons.Made in the UK with 2mm Aluminium.For the Galvanized Stee...

Rear Crossmember with Long Extensions.For Defender 110 TD5.With Body Mount Bracket.NOTE: This typically gets shipped on a Pallet. Additional Freigh...

Rear Cross Member Long Extensions and Upright Body Brackets.For Defender 110 Pre-TD5, (1983-1998).NOTE: This typically gets shipped on a Pallet. Ad...

Rear Crossmember with Short Extensions. For Defender 110 TD5. *Note: a $40 surcharge for additional packaging will apply to this sale. Please add t...

B-Post Full Repair Section Series or Defender, 4/5 Door, Left or Right Hand.Note these are only for Push-On Door Seals, not for the Rivet-on Seals....

Bulkhead Outrigger Left Hand.For Defender 90/110/130.

Outrigger Tie-Bracket Assembly Right Hand. Behind the Bulkhead Outrigger.For Defender 110.

Outrigger Tie-Bracket Assembly Left Hand. Behind the Bulkhead Outrigger.For Defender 110.

Rubber Plug for Chassis Front Defender frm XA159807on

Stainless Steel Bolt Kit for the Defender Bumper.Includes the Black Cover Caps. Does Not include the Special Tap Blocks, see BN-ALQ710040K for a Co...