Defender Clutch

Clutch Kit, Plate, Cover, and Bearing.For the 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi and 300Tdi in a Defender. 200Tdi or 300Tdi...

Valeo OEM Clutch Kit, Plate, Cover, and Bearing.For the 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi and 300Tdi in a Defender. 200Tdi...

Valeo OEM Heavy Duty Clutch Kit, Friction Plate, Cover/Pressure Plate, and Bearing.For 200Tdi and 300Tdi Defender, Discovery 1 and Range Rover Clas...

Heavy Duty Clutch Kit, Friction Plate, Cover/Pressure Plate, and Bearing for 200/300Tdi. Pilot or Flywheel Bushing is not included, see GT-LFB50005...

Heavy Duty Clutch Kit, Friction Plate, Cover/Pressure Plate, Bearing and Fork. For 200Tdi and 300Tdi, Defender, Discovery 1 and Range Rover Classic...

Clutch Friction Plate and Cover/Pressure Plate.For TD5 Defender, and TD5 Discovery 2.OEM Valeo Clutch Kit.Note: No Bearing. See CC-FTC5200. For Fly...

Clutch Kit, Friction Plate, Cover/Pressure Plate, and Bearing for TD5.Fits Defender or Discovery 2 with the TD5 Engine.Note: Flywheel Bushing is no...

9.5" Clutch Cover Pressure Plate AssemblyLate Series 2a and Series 3, Defender with 2.5Gas, Discovery 1 2.0L MPI Gas Engine.

Clutch Release Bearing. Series 3, 71-84, Defender, Range Rover Classic, Discovery 1,

OEM NSK Clutch Release Bearing Series 3, 1971-84. Land Rover 90/110, Defender, Discovery 1, Range Rover Classic.

Clutch Release Bearing Series 1 to 2A, 1948-71Used for both 9" and 9-1/2" Clutch. 2.25L and 2.6L NADA.Also used on Front Output of LT230 for Defend...

OEM NTN Clutch Release Bearing Series 1 to 2A, 1948-71Used for both 9" and 9-1/2" Clutch. 2.25L and 2.6L NADA.Also used on Front Output of LT230 fo...

Clutch Slave Cylinder Assembly Series 3 1971-1984. Also, for LT77 (Land Rover 90/100 and Defender from 1984 to 1993. Series 3 2.25L requires Hose C...

Clutch Slave Cylinder OEM TRW Series 3 1971-84, (Slave is on the Left Hand side of the transmission), Land Rover 90/110 4 cylinder and Defender LT7...

Clutch Slave for Tdi on R380 Gearbox.For Defender, Discovery 1, and Range Rover Classic 1992-94.Notes: 300Tdi to Gearbox Serial Number 56A0669086K ...

Clutch Slave Cylinder 300Tdi from Gbx 56A, TD5to07, TRW

Clutch Slave CylinderFor Stage 1 V8, LR 90/110 V8 and Defender V8 NAS, with LT77, LT85, and R380 Gearbox.Supersedes CC-UKC8677 and CC-UKC8677L, (No...

Clutch Slave for Tdi on R380 Gearbox, OEM TRW. For Defender, Discovery 1, and Range Rover Classic 1992-94. Notes: 300Tdi to Gearbox Serial Number 5...

Clutch Slave Repair Kit RRC 70-94, D1 89-94, 90/110, LT77

Master Clutch Cylinder For 88" and 109", Late Series 2a, (1969-71 North American Standard), and Series 3 (1971-84). Land Rover 90/110/130 and Defen...

Master Clutch Cylinder OEM TRW.For 88" and 109", Late Series 2a, (1969-71 North American Standard), and Series 3 (1971-84).Land Rover 90/110/130 an...

9.5" Clutch Cover Assembly Late 2a,S3,Def2.5G,D1 MPI OEM

Gasket for Clutch Master Cylinder Series 3, 90/110 OEM

Push Rod for Clutch Slave Cylinder 4-Cylinder with LT77 Gearbox.For Defender, and Discovery 1 to 1994.

Clutch Slave Push Rod for R380 Gearbox.For Defender 300Tdi or TD5 with Gearbox from SN 56A066908K.Discovery 2 with TD5 and R380 OEM.

Clutch Pedal Assist Kit Spring and BushingsDefender 1994onReplace the old clutch pedal spring kit to assit the pressing of the clutch pedal on Defe...

Clutch Pedal Pivot Bushing on the Clutch Pedal Spring, CC-EDP7510L (linked below).For Defender 1994 onwards.

Backing Plate for Slave Cylinder Mount S3, 90/110, 101FC

Clutch Release Fork.For Series 3 4 Cylinder or Stage 1 V8.Discovery 1 LT77 V8 up to VIN KS045958.Discovery 2 V8 and TD5 with the R380.Range Rover C...

Clutch Release Fork Kit. For Defender V8 and TD5 with R380 Gearbox. All the Little Bits and Pieces that You Will Need to Replace the Clutch Fork.

Clutch Hose Defender TD5, 90/110 V8, D1, RRC V8

Clutch Flex Hose for Series 3 2.6L 6 Cylinder Engine, 1971-84, and Land Rover 90/100, Defenders with the LT77 Gearbox up to 1994,For Series 3 2.25L...

Retaining Clip for Clutch Release Push Rod Series 3 Defender TD5 with R380 Discovery 1 V8 with R380 For LT77 and Tdi/R380 See CC-FRC3327

Clip for Clutch Release Throw-Out Lever S3, Def, RRCto'94, D1

Nylon Insert for Clutch Release Throw-out Lever S3,Def,RRC,D1 OEM Note: You are purchasing 1, not 5 as shown in the photo

Lock Nut for Brake Hose 7/16". Series 1 48-53, Series 2, 2a, 3, Land Rover 90/110, Defender Clutch Hose.

Nylon Staple for Clutch Fork/Thrust Bearing Retention.Used on Series LT76 and later LT77, LT85 with V8; and R380 with TD5.Not for LT77/R380 with 4...

Nylon Bushing for Clutch Pedal Spring.For Defender from VIN: LA939892 (1994) on.Two typically required.

Torsion Spring for Clutch Pedal.For Defender from VIN: LA939892, (1994) on.For the Nylon Bushings required, see CC-DCP3212L. For the Center Plastic...

Clutch Plate Standard Duty Defender 2.5NA, 2.5TD, 200Tdi and 300Tdi.

Terrafirma Heavy-Duty 1-Piece Single-Mass Flywheel and Clutch Kit for the TD5.Heavy-Duty One-Piece Flywheel, Clutch and HD Release Bearing; Designe...

Master Clutch Cylinder - PowerMaster Clutch by LOF - Made in Great Britain.For 88" and 109", Late Series 2a, (1969-71 North American Standard), and...

Pilot or Spigot Bushing for Flywheel. Series 1-3, 1948 through to end of TD5, Defender, Discovery 2Supersedes 8566L.

Clutch Slave Cylinder for Defender and Discovery 2.300Tdi from Gearbox 56A0669087K (1999)TD5 up to 2007

Cap for Clutch Release Pivot Pin for R380 TD5 & V8

Nylon Staple for Clutch Fork/Thrust Bearing RetentionFor LT77/R380 with 4 Cyl. Not for LT77/LT85 with V8 or R380 with TD5 - see CC-576203. Note: ...

Clutch Slave Cylinder for Defender and Discovery 2.300Tdi from Gearbox 56A0669087K (1999)TD5 up to 2007OEM AP.

OEM TRW Rebuild Kit for Clutch or Brake Master Cylinder.For CV-Type 88" Master Cylinder 90569126, (Used as a Brake Master Cylinder on Series 2/2a 8...