Defender Engine 300Tdi

Headlamp / Headlight Master SwitchFor Defender from VIN: VA104806 1998 to 2014.For Earlier see BE-PRC3430.

Lamp Side Repeater Amber. Defender 300Tdi 1995-1998 (VIN MA939976 to WA159806) Discovery 1, Range Rover P38 Note: This is the lens and body. This d...

Accelerator Cable for Defender Left Hand Drive 300Tdi from VIN: MA939976, (1995).

Serpentine Fan Belt for 300Tdi with 61mm Pulley.For Defender up to 1995, Engine SN: 16L 25164. Discovery 1 up to VIN: MA163103, and Range Rover Cla...

Dayco OEM Serpentine Fan Belt for 300Tdi with 49mm Pulley.For Defender from 1995, Engine SN: 16L 25165. Discovery 1 from VIN: MA163104, and Range R...

Delphi PAIR Brake Rotor Rear Solid For Defender 90 (1994 onwards), Discovery 1 (1994-1999), and Range Rover Classic (1987-1995). Supersedes BB-FTC1...

Terrafirma Cubby Box for Series or Defender, Black Vinyl on Black Vinyl.For Series 2-3 or Defender 90/110/130. Black Vinyl Lid and Box, 2 Cup Holde...

Terrafirma Polished Alloy Gear and Transfer Knob Set R380 Gearbox.For R380 Gearbox, all models from 1994 to 2006; Reverse is rear-ward right, under...

Service Kit for 300Tdi Oil, Air, Fuel Filters, Washers.

Front Crank Oil Seal - Inner 300Tdi

Bushing Kit Polyurethane, Radius Arm to Axle. For Defender 1994on, and RRC 1986-94.

Oil Filler Cap for 200/300Tdi, Defender, D1, RRC

12V LED Flasher Unit Manual Adjustable. LED and Standard Bulb Mix Capable.

Rubber Seal for Brake or Clutch Reservoir Cap. For Cap number BB-SJL500030, (aka: BB-500201). Supersedes BB-260820.

Track Rod Tube Assembly with Ball Joints Defender 90/110

Viscous Fan Coupling Double-End Wrench 32mm/36mm

Front Mud Flaps Only, (no Brackets), Plain, Pair. For Defender 90, 110, 130. 1983-2006. For Galvanized Brackets to go with this, see MF-DA1188.

Bypass Fitting, (Pipe), for 300Tdi Water Pump to Thermostat Housing. One required for Top of Water Pump and One Required for Side of Thermostat Hou...

Swing-Away Spare Tire Carrier for Defender.  For all Defender station wagons with a full rear safari door.

Cork Gasket for Fuel Tap Twin TanksSeries 2A and 3For Auxiliary Fuel Tank changeover lever and valve, 526783. Standard on Military versions.

Blanking Plug Rubber for Tunnel Cover Series/Def & Var. Uses Genuine Land Rover Note: You are purchasing 1, not 3 as shown in the photo

Rubber Floor Mat Set Middle (2nd) Row for Series 109 and Defender 110 Station Wagons. Supersedes FM-STC50173.

Engine Mount for 300Tdi. Fits Defender 90, 110, 130 and Disxcovery 1 with the 300Tdi Engine. Typically 2 required. Each Requires two BN-FX112041L F...

Panhard Rod Bushing for Defender up to VIN: 2A626645, (2002), Range Rover Classic, and Discovery 1. OEM For Later Bushing see SS-RBX101340PY (linke...

Bushing Set Polyurethane Black Front Radius Arms to Chassis. Defender 1987 to 2006, Discovery 1, Range Rover Classic 1986-94

Rear Floor Support 3mm Aluminium. Lower Tailgate at Floor.For Series 2 to 3 and All Defenders but the High-Capacity.Made in the UK.

Temperature Sender Unit for 300Tdi Defender BlackTop.Located in the Thermostat Housing. For the Thermostat Sender for the Discovery/RRC 300Tdi, see...

Poly-Urethane Black Lower Link Trailing Arm to Chassis (PAIR). For Defender 1983-2016, Discovery 1 1989-1998, Range Rover Classic 1987-1995. Front ...

Terrafirma Hi-Capacity 23 Pocket Tool Roll Note: Tools NOT included SPECIAL ORDER: Please note this item is special order and there will be a subst...

Weather Strip for Pick-Up Truck Cab Rear Corner Windows with 4mm Glass.For Defender 90/110/130 from 1989, or when replacing 5mm glass with 4mm glas...

Lucas OEM Relay Control Unit for High/Low Beam and Dip Function.Defender 1991 to 2010, From VIN HA705857 to AA999999.

Snapsac for Fastening Interior Trim Panels.For Defenders.12 Required per Door. For the Firtree Fastener that pushes into these, see DP-MWC1474 or D...

Bolt M6-1.0 x 20mm Stainless Steel Pan-Head Phillips.For Series 3 and Defender Mirror Arms to Hinges, (2 Required per Door/Mirror).You are purchasi...

Clevis Pin for Door Check Strap on Series 2 to 3 Front Doors, and Defender Rear Safari Door Check Strap.Plain Steel. Requires Cotter Pin FS-3359 an...

Reservoir for Power Steering Fluid.For Defender, Range Rover Classic, Discovery 1.Made in Germany.Supersedes SC-ANR6222 and SC-NTC2723.

PropShaft Rear for Defender 90 300Tdi and TD5, 1994-2006, and Defender 90 V8 from 1985 to 1998.You may want to consider new bolts and nuts for this...

Bolt for Seat Belt at Seat Box Anchor Bracket.For Series 2a and 3. Fastens the Seat Belt to the Lower Corner Brackets, SB-345100/1.Note: Typically ...

Terrafirma 2" Lift Rear Cranked Radius Trailing Arms. PAIR. For Defender, Discovery 1 and Range Rover Classic. AKA: Rear Lower Link, or Bottom Link...

Blanking Plug for Bulkhead 1-5/8" Panel Hole Plastic OEM.For Servo Brake Tower, Series and Defender. For Clutch Slave Access on Series 3 Bulkhead G...

Rubber Washer for Rear Fuel Tank Mount.For Series 2-3 109" Station Wagon and Defender 110 or 130 to 1998, (to VIN: WA159806).4 Typically Required.F...

OEM Adapter for Wiper Arm 14.8mm Splined to 1/4" "D" Profile.Some Series 3 with the "D"-Profile Wiper Shaft. Also used on Defender up to VIN: 1A622...

Mud Flap Rear Left Hand Black with White Heritage Logo.For Defender 90.Land Rover Genuine. Includes mounting bracket.Matching right side is MF-LR06...

OEM Dayco Ancilliary Drive Pulley Tensioner Assembly.For 300Tdi, Defender, Discovery 1.Note: This Mounts beside the Water Pump. Not for AC Belt, se...

Ancilliary Drive Pulley Tensioner Assembly.For 300Tdi, Defender, Discovery 1.Note: This Mounts beside the Water Pump. Not for AC Belt, see EP-ERR7296.

Lower Dash Finisher for Left Hand Drive Defender.Supersedes BP-MTC6167.

Coolant Expansion Tank Unit Clear.You Can See the Coolant Level without Removing the Cap!Note: Cap is Not included, see EC-NTC7161 (linked below).F...

Windscreen/Windshield Defender Tinted Laminated 1983-16. Recommend fitting with a new seal, SL-LR056278. *Note: a $40 surcharge for additional pack...

Seat Box Corner Black Protectors Pair Series/Defender.These will fit a Series 2 or 3 but will require matching drilling to accommodate seat rail fi...