Defender Engine

Hose LH Valve Cover to Plenum V8 D1, RRC, P38, Def

Valve for Depression Control TD5 Defender, Discovery 2

Adaptor for Oil Filter on TD5 Defender/ D2

Seal for Oil Fill Cap on TD5 Defender/Discovery 2 OEM

Rear Crank Oil Seal TD5 Defender/Discovery 2 OEM

Rear Crank Oil Seal 300Tdi OEM Def/D1/RRC 1994-99

Packing Seal for Rear Main Bearing Cap.For V8. It fits quite a few trucks, including the Discovery 1 & 2, the Range Rover Classic, the P38, and...

Special Bolt for TD5 Engine Cover OEM,For Defender and Discovery 2 TD5. 3 Required. For the Rubber Grommet, see EP-PYA10011L. For the Flat Washer s...

Bolt for Damper Pulley to Crankshaft TD5 D2,90/110/130 OEM

Bolt for Damper Pulley to Crankshaft TD5 D2,90/110/130 OEM

Bolt for Rocker Shaft to Cylinder Head TD5 Def/D2 OEM

Bolt for Oil Pump Sprocket on TD5.For Defender or Discovery 2 with the TD5 Engine.Land Rover Genuine.

Sensor Inlet Manifold Pressure/Temp TD5 2.5BAR MAP Sensor.Intake Manifold MAP Pressure Sensor.Defender TD5, Discovery 2 TD5

Sensor for Crankshaft TD5 Defender 90/110 Disco 2.  Does not include any wiring.  For wire repair section, see LA-STC1188 (linked below)

Spacer for Crankshaft Sensor on TD5 Engine.Defender and Discovery 2 with the TD5, OEM.

Accelerator Cable for 2.5L Naturally Aspirated and 2.5L Turbo Diesel.For Defender LHD frm VIN: 267062.

Accelerator Cable 200Tdi LHD Defender 1989-94

Accelerator Cable for Defender Left Hand Drive 300Tdi from VIN: MA939976, (1995).

O-Ring for Fuel Injection Wiring Harness TD5 Def/D2

Oil Pump Gear Kit for D1, D2, D90, RR-P38 4.0/4.6L V8

Oil Pipe Cooler to Engine 300Tdi 90/110, D1, RRC, Top

Oil Pipe Engine to Cooler 300Tdi 90/110 Bottom

TD5 Turbo Waste Gate Control ValveFor Defender TD5 and Discovery 2 TD5.OEM Pierburg. Made in Germany.For TD5 Turbo Actuator, see EP-TD5TBACT.

Speedometer Cable Lower for RRC, and All Defender RHD V8 models to VIN:AA267907.

Speedometer Cable Upper 2-Piece for Defender up to 1986.For the Lower Cable see EP-PRC5662 for LHD. For the later Cable, see EP-PRC6021 for LHD, EP...

Speedometer Cable Lower 2-Piece Left Hand Drive Defender 110 up to 1986.For the Upper Cable see EP-PRC5567. For the later cable see EP-PRC6021 for ...

Speedometer Cable for Left Hand Drive Defender from VIN 268017 (1986-2007).For the RHD Cable see EP-PRC6022.

Speedometer Cable for Right Hand Drive Defender 1-Piece, 1986-2007.For the LHD cable see EP-PRC6021.

Speedometer Cable for Right Hand Drive Defender V8 Non-NAS 1-Piece Type.

Rubber Grommet for Engine Cover TD5.For Defender and Discovery 2 TD5. 3 Required. For the Special Bolt, see EP-LYG000230. For the Flat Washer see B...

Connecting Rod Big End Bearing Set .010 US 2.25L Gas/Diesel 1961-84.For Series 2a to 3.Note: Does not fit the Series 2 (1958-61) Engine.

Connecting Rod Big End Bearing Set .020 US 2.25L Gas/Diesel 1961-84.For Series 2a to 3.Note: Does not fit the Series 2 (1958-61) Engine.

Crank Thrust Washer Standard Set.For All 4 Cylinder Engines up to 1998 (Excluding VM).

Crank Thrust Washer Standard Set, OEM.For All 4 Cylinder Engines up to 1998 (Excluding VM).

Connecting Rod Big End Bearing Set .020 Thou Over.For 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi, and 300Tdi.OEM King.

Connecting Rod Big End Bearing Set Standard.For 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi, and 300Tdi.OEM King.

Piston Assembly 010" Oversize with Rings and Gudgeon Pin.For the 2.25L Series 2 to 2 and Land Rover 90/110.Bearmach New Old Stock. A little scruffy...

Piston Assembly 0.020" Over-Sized 2.25L Gas

Piston Assembly 030" Oversize with Rings 2.25L Gas Series 2-3

Piston Assembly 040" Oversize with Rings 2.25L Series 2-3

Piston Assembly 060" Oversize with Rings 2.25L Series 2-3

Piston Assembly Standard 2.25L Gas w/Rings & Gudgeon Pin

2.25L Piston Ring Set per Piston .010 OS Gas For Series 2 through 3, 1958-84

2.25L Piston Ring Set per Piston .030 OS Gas For Series 2 through 3, 1958-84

Core Plug 1" Threaded for 2.0L & 2.25L Engines.For Series 1 to 3. 2 Required for Series 1 1.6L and 2.0L, Series 2-3 2.25L 3-Bearing. Series 3 m...

Main Bearing Set Standard for 200Tdi and 300Tdi.OEM King.

Main Bearing Set Standard V8 D2, RR-P38. Def 87-06

Main Bearing Set 010 for 2.5L 4 Cyl 200/300Tdi King