Defender Engine

Speedometer Cable Upper 2-Piece for Defender up to 1986.For the Lower Cable see EP-PRC5662 for LHD. For the later Cable, see EP-PRC6021 for LHD, EP...

Speedometer Cable Lower 2-Piece Left Hand Drive Defender 110 up to 1986.For the Upper Cable see EP-PRC5567. For the later cable see EP-PRC6021 for ...

Speedometer Cable for Left Hand Drive Defender from VIN 268017 (1986-2007).For the RHD Cable see EP-PRC6022.

Speedometer Cable for Right Hand Drive Defender 1-Piece, 1986-2007.For the LHD cable see EP-PRC6021.

Speedometer Cable for Right Hand Drive Defender V8 Non-NAS 1-Piece Type.

Rubber Grommet for Engine Cover TD5.For Defender and Discovery 2 TD5. 3 Required. For the Special Bolt, see EP-LYG000230. For the Flat Washer see B...

Connecting Rod Big End Bearing Set .010 US 2.25L Gas/Diesel 1961-84.For Series 2a to 3.Note: Does not fit the Series 2 (1958-61) Engine.

Connecting Rod Big End Bearing Set .020 US 2.25L Gas/Diesel 1961-84.For Series 2a to 3.Note: Does not fit the Series 2 (1958-61) Engine.

Crank Thrust Washer Standard Set.For All 4 Cylinder Engines up to 1998 (Excluding VM).

Crank Thrust Washer Standard Set, OEM.For All 4 Cylinder Engines up to 1998 (Excluding VM).

Connecting Rod Big End Bearing Set .020 Thou Over.For 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi, and 300Tdi.OEM King.

Connecting Rod Big End Bearing Set Standard.For 2.5L Naturally Aspirated Diesel, 2.5L Turbo Diesel, 200Tdi, and 300Tdi.OEM King.

Piston Assembly 010" Oversize with Rings and Gudgeon Pin.For the 2.25L Series 2 to 2 and Land Rover 90/110.Bearmach New Old Stock. A little scruffy...

Piston Assembly 0.020" Over-Sized 2.25L Gas

Piston Assembly 030" Oversize with Rings 2.25L Gas Series 2-3

Piston Assembly 040" Oversize with Rings 2.25L Series 2-3

Piston Assembly 060" Oversize with Rings 2.25L Series 2-3

Piston Assembly Standard 2.25L Gas w/Rings & Gudgeon Pin

2.25L Piston Ring Set per Piston .010 OS Gas For Series 2 through 3, 1958-84

2.25L Piston Ring Set per Piston .030 OS Gas For Series 2 through 3, 1958-84

Core Plug 1" Threaded for 2.0L & 2.25L Engines.For Series 1 to 3. 2 Required for Series 1 1.6L and 2.0L, Series 2-3 2.25L 3-Bearing. Series 3 m...

Main Bearing Set Standard for 200Tdi and 300Tdi.OEM King.

Main Bearing Set Standard V8 D2, RR-P38. Def 87-06

Main Bearing Set 010 for 2.5L 4 Cyl 200/300Tdi King

Tappet Assembly (Follower), 200/300Tdi

Exhaust Valve for 3.5L V8 S3, Def, RRC 78on, D1 to 91

Oil Pan Sump Drain Plug for TD5. For Defender or Discovery 2 with the TD5 Engine. Requires copper washer CS-CDU1001L (linked below).

Wastegate Actuator for TD5 Turbo Vacuum. Defender TD5, Discovery 2 TD5.For TD5 Turbo Waste Gate Control Valve see EP-PMK100130.

Gasket Seal for EGR Pipe to EGR Valve TD5 Land Rover Gen

Electronic Red Cap Distributor for 2.25L/2.5L - 45D4 Type. Ready to go electronic ignition. Red cap is cosmetic.  Same as the black cap (EE-ETC5835...

Gasket for the Inlet Manifold to the Exhaust Manifold.2.25L Gas Series 2-3 1958-84.

Flange Head Bolt M8 x 85mm Various Uses OEM.Two required on 300Tdi Intake Manifold.

Twist on oil filter, for the Td5 engine (Defender or Discovery 2). Not a bad idea to lube the new filter seal with a dab of oil when fitting.

Gasket for the Oil Filter Adapter on the 300Tdi Engine.For Defender, Discovery 1, and RRC.

Gasket for Vacuum Pump on 300Tdi.For Defender, Discovery 1, and Range Rover Classic with the 300Tdi Engine.

Copper Oil Pan Drain Plug Washer. For 300Tdi, (see note below), 2.0L MPI, and Range Rover P38 4.0, 4.6L V8. For a replacement Plug, see EP-UAM2957L...