Defender Engine

Drive Belt Idler Pulley and Bracket. For TD5, Defender and Discovery 2 with the TD5.

Tensioner Pulley/Bracket for TD5.For Defender and Discovery 2 with the TD5.See EP-ERR6493 for Top Idler Pulley, see EP-ERR6949 for Anciliary Idler...

Idler Pulley Assembly for Drive Belt. For Defender or Discovery 2 TD5 No A/C. This is the Fixed Pulley at the top; for Tensioner Pulley see EP-ERR6...

Oil Feed Pipe Assembly Turbo to InterCooler 300Tdi

Bolt Kit for 300Tdi Water Pump - 8 Bolts.Fits Defender, Discovery 1, and RRC 300Tdi.

Union Nut for Fuel Filter on the 2.25L Diesel and Various Other Uses. OEM.

Flexible Rubber Mount for 300Tdi Air Cleaner & Other Uses. OEM. Each requires 1x BN-FN106047L.

O-Ring for Oil Cooler Pipes.For Defender, Discovery 1, RRC. 200Tdi, 300Tdi and V8.

Main Bearing Set Standard for 5 Bearing 2.25L Engine 1980on.OEM King.

Main Bearing Set 0.010 Over-Size for 5 Bearing 2.25L Engine 1980on.OEM King.

Head Gasket for 2.25L and 2.5L Gas Composite.For Series 2-3 and Defender.

Heater/Glow Plug for Puma 2.4 Liter TDCi Engine.For Defender 2007-11, OEM Denso.

Engine Stop Cable for Series 3 LHD 2.25L Diesel with Steering Lock.

Oil Pressure Warning Switch for all 4-cylinder Defenders 1985 to 1998 Lucas

Oil Pressure Warning Switch for all 4 cylinder Defenders(1985 to 1998)

Crank Shaft Thrust Washer .0025 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Na...

Crank Shaft Thrust Washer .0050 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Na...

Crank Shaft Thrust Washer .0075 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Na...

Crank Shaft Thrust Washer .010 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Nat...

Circlip for 2.25L and 2.5L Gas Piston Connecting Rod Gudgeon Pin.2 Required per Piston.

Diesel Injector Assembly Rebuilt - New Old Stock.Only 2 Left!Direct fit for Series 2a-3, from March 1968, 2.25L Diesel, Defender 2.25L and 2.5L Nat...

Diesel Injector Assembly New. Direct fit for Series 2a-3, from March 1968, 2.25L Diesel, Defender 2.25L and 2.5L Naturally Aspirated Diesel and 2.5...

Screw Nut for Rocker Valve Cover on 300Tdi, OEM.3 Typically Required. For the Sealing Washer, see EP-ERR3424.

Sealing Washer for Valve Cover on 300Tdi.For Defender, Discovery 1, and Range Rover Classic.Typically 3 Required. For the Rocker Valve Screw Nut th...

Lock Nut for Connecting Rod.Fits 2.0L Diesel, 2.25L Gas or Diesel, 2.5L Gas or Naturally Aspirated Diesel, or 2.5L Turbo Diesel.OEM. Made in the UK.

Valve Spring.For 2.25L Gas or Diesel, 2.5L Gas or Diesel, 2.5L Turbo Diesel, 200Tdi and 300Tdi.For Series 2-3 and Defender.Made in the UK.Supersede...

Hardened Valve Seat Insert for Exhaust Valve for 2.25L Gas Engine.Series 2 to 3 2.25L Gas and Defender 2.25L and 2.5L Gas.Santana, Made in Spain.

Bottom End Gasket Set with Front and Rear Crank Seals for TD5.For Top-End Gasket Set, see EG-DA2112.

Head Gasket Set for Defender TD5. No Head Gasket - Check which one is Required, 1-Hole, 2-Hole, or 3-Hole. See EG-LVB000250, EG-LVB000240, or EG-LV...

Stud M8 x 35mm Injector to Cylinder Head, Inlet Manifold, and other Various Uses.For Defender.

Coolant Sensor for V8 EFI up to 1998.For D1, RRC, P38.Supersedes EC-EAC3927L.

Rubber Seal for Valve Cover Dome Nut 2.25/2.6L Engine

Camshaft bearing set 4-Cyinder, OEM, 1958-98. For 2.0L diesel, 2.25L gas or diesel, 2.5NA, 2.5TD, 200Tdi and 300Tdi. These should be reamed, (or li...

Camshaft Bearing Rear 4 Cylinder Engines, 1958-98, OEM.<.p>For 2.0L Diesel, 2.25L Gas or Diesel, 2.5NA, 2.5TD, 200Tdi and 300Tdi.Un-Split Rin...

Camshaft Bearing Front for 4 Cylinder Engines, 1958-98, OEM.For 2.0L Diesel, 2.25L Gas or Diesel, 2.5NA, 2.5TD, 200Tdi and 300Tdi.Un-Split Ring Sty...

CamShaft for 2.25L 3-Bearing Gas Engines.For Series and Defender up to 1983.For the Later Camshaft for the 5-Bearing Engine see EP-ETC7128 (linked ...

Camshaft for Late Series 3 2.25L 5-Bearing Engines and Defender 2.25/2.5G, 2.5NA/TD, 200Tdi

Gasket for Exhaust Manifold to Y-Pipe V8 and Dsl OEM.Fits EFI V8 engine 3.5, 3.9, 4.0, 4.2 and 4.6L. 2 Typically required.

Gasket For Water Inlet.For Series 1 to 3, 2.0L Diesel, 2.25L Gas or Diesel, and Defender 2.25L Gas, 2.5L Gas and Naturally Aspirated Diesel, 2.5L ...

Gasket For Front Timing Cover Joint. For Series 1-3, 2.0 Diesel, 2.25L Gas or Diesel, and Defender 2.25L Gas, 2.5L Gas or Naturally Aspirated Diese...

Drain Plug and Seal for many later engines - Check your Manual First.Defender 2.2 Tdci and 2.4 Tdci 2007-16.New Defender V8 2022on.LR3 4.4L V8 and ...

O-Ring for Fuel Block.For Defender TD5 to 2001, Discovery 2 with the TD5 to 2001.

Accelerator Throttle Cable for Defender 90/110 with the 3.5L V8 Twin Carburetor, (including the NAS Defender 90 3.5L V8 Carb).You may require the c...

Accelerator Throttle Cable for Defender 110 2.25L RHD and 2.5L LHD Naturally Aspirated Diesel up to VIN:267061.30" Long.

Accelerator Cable Defender 110 LHD 2.25L Diesel. 46" Long.

Flywheel Assembly for TD5 Defender and TD5 Discovery 2. OEM Valeo. Note: This is a Special Order Item. Ships in 2 to 3 Weeks. Note: This is the Dua...

Hose Air Cleaner to Turbo 200Tdi OEM

Inlet Rocker Arm Bushing All Diesel Engines upto 1990 (Not Tdi). Fits Series 1 to 3, 2.0L and 2.25L Diesel, Defender 2.5L Naturally Aspirated and 2...