Defender Hardware

Window Handle Retaining Clip Defender from LA932487

Hinge Gasket for Door Hinge to Bulkhead Series 3 Def to 1997

Rear Body Nut Plate and Fasteners for Series and Defender to 2002.Plate is Aluminium with Stainless Nutserts, Bolts and Washers Stainless Steel, Ri...

Hylomar 101 RTV Silicon Sealant Tube.85 Grams, For Gasketing/Sealing.

Bolt M6-1.0 x 20mm Stainless Steel Pan-Head Phillips.For Series 3 and Defender Mirror Arms to Hinges, (2 Required per Door/Mirror).You are purchasi...

Bolt for Seat Belt at Seat Box Anchor Bracket.For Series 2a and 3. Fastens the Seat Belt to the Lower Corner Brackets, SB-345100/1.Note: Typically ...

Seat Belt Anchor Bracket Front Lower Right and Left Hand, PAIR.Hot-Dip Galvanized. For Series 1-3, and Defender.

Bonnet Hinge Kit Aluminium Billet Black Pair.For Defender. With bolts and bonnet hinge bushings.

Rear Cross-Member Bolt Kit Stainless Steel.Metric, For Series and Defender.To bolt the rear tub to rear body mounting bracket, (Puma style), and to...

Washer Flat for Fuel Pump, Pick-Up, Fuel Sender, Defender Door Handles, and Various other uses. OEM.

Rivets Spat for Wheel Arches Defender and Various Uses Package of 10For Re-Usable Rivets see BP-AFU1075RU10.

Re-Usable Rivets for Wheel Arches Defender & Various UsesA Better Fit, Easier Installation and these are Removal and Re-Usable.Package of 10. T...

Set of 12 Cylinder Head Bolts for TD5 Engine. Defender and Discovery 2 with TD5 Engine. For a Head Gasket Sets, see EG-DA2112G-EARLY or EG-DA2112G-...

Stainless Steel Screw Set for Side Air Intake Defender Set 5For Side Air Intake BP-BTR6188For replacement Captive Nuts in Wing Panel see FS-AFU1926L

Strap for Windscreen Inner Hinge Mount Defender Note: From JA912346 (1992). For earlier see BP-RTC6159.Supersedes: BP-MUC4290, BP-LR016671

Headliner Fir Tree Fastener Black Various UsesDefender, Discovery 2, RR P38

Bracket for Sill Panel Mount Defender 90/110/130

Special Stud for Mounting Hard Top Side Panels on Series 2-3 109" and Defender 110.Supersedes BP-338740 and BP-MRC9833.For the Stud used on Series ...

Flange Head Bolt M8 x 85mm Various Uses OEM.Two required on 300Tdi Intake Manifold.

Bolt for Front Panhard Rod 90/110 OEM (2 required) Note: You are purchasing 1, not 5 as shown in the photo.

Door Lock Cylinder Barrels and Keys, 3 Sets, with 6 Matching Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Doo...

Set of 3 Stainless Steel Door Hinge Pin Kits For Series 2-3 or Defender 3-Hinge Rear Safari Door

Screw 3/4"x#8 Black Philips Pan Head for Defender Wing Top Vent Grills OEM.7 Screws Required per Vent Grill.

Glazing Felt for Early Defender & Military Door Windows OEM 23" long x 3/4" wide

Clip Glass Window Holder for Defender 90/110 1994-01

Shim for Front Axle Shaft 0.75mm Defender, Discovery 1, and Range Rover Classic. OEM. Note: You are purchasing 1, not 5 as shown in the photo.

Shim for Door Hinge (Both-Ends, New Style Hinges).For Series that have been replaced with the later Puma Hinges, and Defenders.

Stainless Steel Front/Middle 4-Door Bolt KitFor Series 3 109" 5-Door Station Wagon, Defender 110 5-Door Station Wagon, and Defender 130 Crew Cab.In...

Early Defender Center Tunnel and Lower Bulkhead Cowl Bolt and Nut Kit.. Fits Defenders up to 2003.

Door Latch Assembly for Tailgate Defender 110/130 Hi-Cap. Special Order Item.  Will be ordered when you order. 

Rear Cross-Member Plates and Bolts Fastening Kit for Series and Defender to 2002. Includes 5x BP-YRM097A, (BP-MRC8736), Aluminium Nut Plates, 10x S...

Bolt and Nipple Retainer Kit for Defender Bonnet Catch. From 1995. OEM. Made in the UK. For the Complete Bonnet Catch Assembly, see BP-STC925.

Rubber Buffer Adjuster for Puma Bonnet Stop, OEM.For Defender 2007 to 2016.Supersedes BG-CJM500030.

Bolt for Anti-Roll Bar (also called a Sway Bar) to Ball Joint Front or Rear for Defender 90, Discovery 1 and Range Rover Classic.Requires Metal-Loc...

Bolt for Anti-Roll Bar (also called a Sway Bar) to Ball Joint Rear for Defender 110/130.Requires Metal-Lock Nut BN-NV116041L and Washers SS-RYF5001...

Clip Double Pipes to Chassis for Fuel Lines.For Defender up to 2006 and Range Rover Classic.

Pop Rivet 1/8" Diameter x 1/4" Long, Aluminium with Aluminium Mandrel.For Various Uses on Series, Defenders, Discovery 1, and RRC.

Bolt M10 x 45 mm Front Mount of Defender Fuel Tank.OEM. Note: You are purchasing 1, not 10 as shown in the photo.

Bolt Bulkhead to Chassis Defender 90/110/130

Stud M8 x 35mm Injector to Cylinder Head, Inlet Manifold, and other Various Uses.For Defender.

Bolt Flanged Head M8 x 50mm.Various Uses, OEM.

Spacer for Door Striker Defender OEM.You are purchasing 1, not 5 as shown in the photo.

Bolt Kit for 300Tdi Water Pump - 8 Bolts.Fits Defender, Discovery 1, and RRC 300Tdi.

Bolt for Transfer Boot Retainer Bracket to Floor OEM.For Series 1-3, and Defender to 1986.

Bolt Flanged Head M10x50mm for Drive Member.Defender up to VIN: KA930455, (1993).For 1994 on, see BN-BX110095M.

Door Lock Cylinder Barrels and Keys, 2 Sets, with Matched Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Door t...

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: XA159807 to 2A626645, (1999-2002).For later Defender see SS...

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: LA930456 to WA159806, (1994-98). RRC 1992-94.For later Defe...