Aftermarket

Delphi OEM Wheel Cylinder Left Hand. (2 Required per Side) Front 11" Brakes on Series 3 88" June 1980 to 1984 Front 11" Brakes on Series 1, 2, 2a, ...

Distributor Cap for 2.25L 4 Cylinder Series 2-2a, 1958-1967 Screw-In Type, for 25D4 Distributors. OEM.Includes the Acorns for fastening the wires.Y...

Defrost Vent Dash Top Cover Defender from 1989 to 2006.From VIN FA453192.Note: Earlier Vent, HS-MTC6040, is no longer available.

Top End Decoke Gasket Set, (no Head Gasket), 300TdiThis does not include the Head Gasket. Four thicknesses to choose from, (based on 1, 2, 3, or 4-...

De-carb Top End Gasket Kit 200Tdi (No Head Gasket)This does not include the Head Gasket. Four thicknesses to choose from, (based on 1, 2, 3, or 4-H...

Delphi AP Brake Pad Set Front Fits Land Rover 110 (1983-86) and Land Rover 127 (1985-6)

Top End Gasket Set, (no Head Gasket), for 300TdiPayen OEM. Made in Italy.This does not include the Head Gasket. Four thicknesses to choose from, (b...

Cylinder Head Overhaul Kit for Series 3 1975 on, 2.25L GasEverything needed to do a Valve Job.

Cylinder Head Overhaul Kit for Series 2, 2a, 3 up to 1974, 2.25L GasEverything needed to do a Valve Job.

Copper Seal Manifold to Front Pipe OEMDefender 2.5L Gas and 2.5L NA Diesel

Delay Relay for Wiper MotorDefender from 1993, RRC from VIN: FA351847 (1989), Discovery 1 up to VIN: JA034313 (1992).Originals were red in colour.....

Coupler for Distributor Series 2a/3, 90/110, 1968-93 OEM

Coupler Drive Gear for Lucas DistributorSeries 2a upto 1967

Copper Nickel Pipe Reservoir to Brake Master Cylinder.1/4" pipe for use on Series 2a 109" Single Line Brake Systems, from Suffix F, March 1967 with...

Cylinder Head Bolt for TD5 Engine 12 Required Defender and Discovery 2 with TD5. For a Full Set of 12, see EP-ERR5384Kit (linked below)

Copp-Nick Pipe Set Defender 90 No ABS, With Front Valve LHD 1991-98.

Copper-Nickel Pipe Set Series 3 109" Dual Line LHD with Servo, No Proportioning Valve

Copper-Nickle Brake Line Set Defender 90 1985-91 LHD

Copper-Nickel Brake Set Series 2a 109" NADA 6-Cyl LHD 1967-68Note: If you still have a working Remote Brake Servo, this Kit Does Not Include the Pi...

Copper-Nickel Brake Set Series 2a 4-Cyl 109" LWB LHD 1961-71All Pipes in this kit are 3/16" Copper-Nickel with UNF Brass Fittings.Single Line Brake...

Copper-Nickel Brake Set Series 1 86" SWB LHD 1954-1956All Pipes in this kit are 3/16" Copper-Nickel with UNF Brass Fittings.Includes Plastic Pipe S...

Black Wheel Nut for Alloy Rims.Fits Defender, Discovery 1, and RRC. Note: These are for the Alloy Rims, not Steel Rims.For a Set of 20, see AW-RRD5...

Dash End Trim Panel Left Hand Black Plastic. For Defender Left Hand Drive w/o AC. Before buying this, Check out the Raptor Steel replacements! BE-R...

Stainless Steel Bolt Kit for the Defender Bumper.Includes the Black Cover Caps. Does Not include the Special Tap Blocks, see BN-ALQ710040K for a Co...

Cylinder Head Bolt for 2.25L Series 2-3 Engine. OEM. Note: You are purchasing 1, not 10 as shown in the photo.

Defender XS Front Grill and Lamp Cover Set Black Silver Mesh. Note: Fasteners are not included. For Stainless Steel Fasteners, you would need 2x F...

Cover for Differential Rear Salisbury S3 109 Def 110/130>06

Corteco Oil Seal Diff Pinion Rover Axle, Def97on,D1,D2,RRC

Cotter Pin for 24-Spline Series 3 Hubs and 101 Track Rod Ends

Corteco Oil Seal Stub Axle InnerFor Defender from 1994, RRC 1992-94, and Discovery 1

CV Joint Outer Axle 23 Spline.For Land Rover Defender 90/110/130, 1984-93, Axle Code 20L.Includes a Packet of Grease and the Circlip, AD-RTC4820.

Defender Tailgate Assembly with Hinges, Brackets and Latch Eyes. Has the Cable Retention Brackets. For earlier Series Chain Retention type of Tailg...

Dayco Timing Belt for 2.5NA & 2.5TD

Cylinder Head Bolt for 300Tdi OEM D1/RRC/Defender.Note: You are purchasing 1, not 4 as shown in the photo.

Cylinder Head Bolt for 300Tdi OEM D1/RRC/Defender. Note: You are purchasing 1, not 4 as shown in the photo.

Cylinder Head Complete 300Tdi with Valves and Head Bolts.This head has additional waterways for improved cooling. Use a Multi-Leaf Metal Head Gaske...

Crankshaft Damper Pulley for TD5 Defender and Discovery 2 with the TD5Recommended that you also replace the Bolt, EP-LYG101190 (linked below).

Crank Thrust Washer Standard Set, OEM.For All 4 Cylinder Engines up to 1998 (Excluding VM).

Crankcase Emissions Vent Control (PCV) Assembly For late Series 2a and Series 3. For the Diaphragm Only, see EP-RTC6855DIA (linked below). Supersed...

Fan Belt for Rover 3.5L V8 w/o AC, w/o PAS

Dayco Belt for A/C Compressor on 300Tdi D1, RRC, Defender

Split Cotter Pin 3/64" x 3/4" for Series 1 Solex Carburetor, Oil Strainer, Door Check Strap Clevis Pin, RRC Accelerator Pedal and Various Other Use...

Cup Washer for Instrument Panel to Cowl 90/110. OEM. Note: You are purchasing 1, not 10 as shown in the photo

Defender Gear Gaiter Black - Leather Look Instead of Rubber Smarten your up your Defender's Interior with a new Britpart Gaiter! For the Standard R...

Polished Defender Alloy Gear and Transfer Knob Set for LT77 and LT85 Gearbox.Fits Defenders up to and including 200Tdi, 1983-94.For the later R380,...

Defrost Demister Vent Dash Top Cover.For Series 3, 1975 to 84.These are 10.75" wide, adaptable for the early Defender vents, (to 1988), HS-MTC6040,...

CV Joint Repair Kit for Defenders from 1994 through to the Pumas in 2007.Fits non-ABS and ABS with 24 spline axles.