Aftermarket

Lower Steering Column Shroud for Defender Note: Will Not Fit Puma fitted with Bluetooth and/or Dynamic Stability Control. Supersedes BP-MTC3500. 

Mirror Arm for Wing Mount Extended 8-1/2" Series 1-3 For Mirror Heads, see GM-606187 for 6" Round, or GM-DA2130 for 7" x 5" (both linked below).

Mirror 8"x5" and Arm for Door Hinges For Series from August 1982 or Defender. Works on Left or Right Hand Door. Convex Mirror. Note: Your Upper Doo...

Lucas L691 Front or Rear Indicator Lamp Complete Amber Plastic.North American Standard in the 60's. These are 3-1/8" in diameter. Larger than the E...

Lucas L594 Clear Glass Beehive Lens

Left Hand Anti-Burst Door Striker. For Series 3 with Anti-Burst Door Latches, and Land Rover 90/110 with 2-Piece Front Doors and Anti-Burst Door La...

LED License Plate Light AssemblySeries 1-3, Defender AllWipac

Leaf Spring Kit for Series 1-3 86/88" LHD Standard with U-Bolts. Standard Duty Set of Leaf Springs and U-Bolts. *Note: a $40 surcharge for addition...

Lock Washer Shake-Proof Int Tooth 7/16" for Series 1 Brake Hose & Series 2, 2a, 3 Clutch Hose.

Intermediate Pipe and Silencer 300Tdi 110/130   *Note: a $40 surcharge for additional packaging will apply to this sale. Please add the surcharge l...

Indicator Switch Horn and Headlamp Dip Defender up to VIN GA455945, 1990. For Later, see BE-STC439 (linked below).

Switch Arm for Headlight Dip, Flash & Horn. For the Series 3 from 1971 through 1984.

Heater/Glow Plug for TD5 Engine For Defender and Discovery 2's with the TD5 Engine. 4 Required, not 5. Guess they didn't have room for the 5th Glow...

Hub Bearing for Series 3 1980 on, Defender, RRC and D1, Timken. Supersedes: AD-RTC3429

Hinge Gasket for Door Hinge to Bulkhead Series 3 Def to 1997

Hand Brake Relay Shaft Replacement or Conversion Kit Used on 1967-84 Series 2a-3 Chassis, or when changing your Series 2 or early 2a chassis to a l...

Hand Brake Shoe Retention Kit. Fits Defenders, Discovery 2 and Range Rover P38 from 1993on. 

Heater Control Cable Hot/Cold Lever Series 3 and Defender up to 2006. 50" Long. Needs to be Cut-Down for Series 3 use. Supersedes: HS-347941 and HS...

Heater Control Valve for Kodiak Mark II & III Series 2/2a

Half Shaft Rear Axle Left Hand.Series From 1958 to June of 1980. 10-Spline. Rover Axle.

Headlamp Mounting Kit with Chrome Retention Ring. OEM by Wipac. For Series 1-3 and Defender. For the more Original Steel Buckets used on Series, se...

Gear Assembly for Wiper Motor For Series 2a from VIN Suffix F, (1969), Series 3, and Defender up to 2001, (to VIN:1A622423). Fits Wiper Motor WW-RT...

Glass Fuse 15AMP 7.5AMP Continuous for Series 1-3

Galvanized Stays for Front Wings PAIR Series 2-3, 88" and 109".

Gasket Cork for Oil Sump Series 1 1.6L or 2.0L 1948-58

Land Rover Genuine Gasket Cork for Rocker Valve Cover.For Series 1 1.6L and 2.0L Gas Engine, 1948-58.

Gasket Cork for Side Valve Cover.For Series 1 1.6L or 2.0L Gas Engine, 1948-58.

Fuel Filler Tube Hose for 109" LWB Series 2-3 Rear Tank.Notes: Requires HC-TS52-12-SS and HC-TS32-12-SS Clamps (see below links).

Front Door Window Handle Crank Black. For Defender from LA932528, (1994 on). For the Clip that holds this to the Regulator, see DP-BNP4556L. For th...

Front Door Glue-On Seal Kit for 88/109" 2 Front Doors Series 2-3. Includes enough cut-to-length glue-on door seal for both doors, left and right-ha...

Front Indicator Light AssemblyAmber 2-3/4" Diameter Euro-Style Plastic LensFor Series and Early Defenders with bullet connections.

Foam Gaskets for 3mm Premium Wing Top Protectors. These gaskets sit between the Defender wing and the chequer plate.Fits all Land Rover 90/110's an...

Front Chassis Repair Leg . Left side. Series 2-3

Exhaust Valve 2.25L Gas Series 2-3, 1958-81For Standard 3-Bearing Engine.For Inlet Valve see EP-ERC7150 (linked below). For Complete Head Rebuiild ...

Filler Strip for Window Seal Rear Corner Window For Series and Defender.For use with SL-306287 (linked bottom left), SL-CGE500660 (linked bottom ri...

Brake Shoes Axle Set 10" Front or Rear. OEM, Ferodo. Made in Italy.Fits Series 1 80", 86", and 107" Front with 10" Brakes.Series 2-3 88" Front up t...

Ferodo Brake Pad Set RearFor Defender 110/130 Up To VIN 1A614447 (Model Year 2001)Requires Fitting Kit BB-DA4105 (linked below left).For Later see ...

Exhaust Hanger Bracket for Intermediate Pipe on Series 1-3 86/88" 1954-84 Pre-assembled, ready to bolt into position. Please check your chassis for...

Fan Belt Toothed for Series 1 1.6L and 2.0L 1948-58.Sink your teeth into that!Supersedes FB-STC3673, FB-GFB40995.

Door Linkage Rod Kit Front RH Push Button Defender 1983-16

Double S Stainless Steel Exhaust System This kit fits: Series 2A and 3 SWB 88" all gas models 1961-84. Left Hand Exit. Includes Stainless Steel Bol...

Engine or Gearbox Mount for V8 RRC, 90/110, D1 & 101 F/C With Nuts.

Drain Plug for Gearbox & Transfer Case & S2a Axle

Door Window Channel Vertical Strip for Front, Middle, & Rear Windows on Series 2, 2A, & 3.

Everything you need to replace the Valve Cover Dome Nuts.... no, not donuts, dome nuts.

Electronic Black Cap Distributor for 2.25L/2.5L - 45D4 Type. Ready to go electronic ignition. Black cap is cosmetic.  Same as the red cap (EE-ETC58...

Door Striker Plate Series 2-3 1958-1984, for Slam-Type Door Handles.

Delphi OEM Wheel Cylinder Right Hand. (2 Required per Side) Front 11" Brakes on Series 3 88" June 1980 to 1984 Front 11" Brakes on Series 1, 2, 2a,...