Aftermarket

Propshaft, (Drive Shaft), Front for Series 1-3 4 Cylinder 1956-84.Fits Series 1 88" and 109", 1956-58.Fits Series 2-3 88" and 109" 4 Cylinder, (Not...

Performance Air Filter for Series 2.25L Gas.Fits Zenith or Weber Carburetor.And yes, it just fits under your bonnet.

Copper Oil Pan Drain Plug Washer. For 300Tdi, (see note below), 2.0L MPI, and Range Rover P38 4.0, 4.6L V8. For a replacement Plug, see EP-UAM2957L...

Oil Seal Diff Pinion Rover Axle, 90/110 VA '97on, D1, D2, RRC

Mud Flaps for Range Rover Classic Front or Rear (No Bracket)

Mud Rear Corner Speaker Panels (Pair) for 5.25" Speakers.

This is the left rear mudflap for the Defender 110/130, mounted on the steel bracket. No logo, just plain black.Matching flap for the right side i...

MUD Half Door Trim Panels Pair.Notes: For 2 Piece Front Doors. Also Fits Early/Military Defenders with 2-Piece Doors. Some Trimming is Required for...

Nut 5/16" BSF for Various Uses. Note: You are purchasing 1, not 5 as shown in the photo.

NTN Outer Hub Bearing Series 1 Front, Series 2/2A/3 Front and Rear up to 1980. For Inner Hub Bearing see AD-RTC3416G (linked below left) For a comp...

NTN Inner Hub Bearing Series 1 Front, Series 2, 2A and 3, Front and Rear up to 1980. For Outer Hub Bearing see AD-RTC3426G (linked below left) For ...

Lower Steering Column Shroud for Defender Note: Will Not Fit Puma fitted with Bluetooth and/or Dynamic Stability Control. Supersedes BP-MTC3500. 

Mirror Arm for Wing Mount Extended 8-1/2" Series 1-3 For Mirror Heads, see GM-606187 for 6" Round, or GM-DA2130 for 7" x 5" (both linked below).

Mirror 8"x5" and Arm for Door Hinges For Series from August 1982 or Defender. Works on Left or Right Hand Door. Convex Mirror. Note: Your Upper Doo...

Lucas L691 Front or Rear Indicator Lamp Complete Amber Plastic.North American Standard in the 60's. These are 3-1/8" in diameter. Larger than the E...

Lucas L594 Clear Glass Beehive Lens

Left Hand Anti-Burst Door Striker. For Series 3 with Anti-Burst Door Latches, and Land Rover 90/110 with 2-Piece Front Doors and Anti-Burst Door La...

LED License Plate Light AssemblySeries 1-3, Defender AllWipac

Leaf Spring Kit for Series 1-3 86/88" LHD Standard with U-Bolts. Standard Duty Set of Leaf Springs and U-Bolts. *Note: a $40 surcharge for addition...

Lock Washer Shake-Proof Int Tooth 7/16" for Series 1 Brake Hose & Series 2, 2a, 3 Clutch Hose.

Intermediate Pipe and Silencer 300Tdi 110/130   *Note: a $40 surcharge for additional packaging will apply to this sale. Please add the surcharge l...

Indicator Switch Horn and Headlamp Dip Defender up to VIN GA455945, 1990. For Later, see BE-STC439 (linked below).

Switch Arm for Headlight Dip, Flash & Horn. For the Series 3 from 1971 through 1984.

Heater/Glow Plug for TD5 Engine For Defender and Discovery 2's with the TD5 Engine. 4 Required, not 5. Guess they didn't have room for the 5th Glow...

Hub Bearing for Series 3 1980 on, Defender, RRC and D1, Timken. Supersedes: AD-RTC3429

Hinge Gasket for Door Hinge to Bulkhead Series 3 Def to 1997

Hand Brake Relay Shaft Replacement or Conversion Kit Used on 1967-84 Series 2a-3 Chassis, or when changing your Series 2 or early 2a chassis to a l...

Hand Brake Shoe Retention Kit. Fits Defenders, Discovery 2 and Range Rover P38 from 1993on. 

Heater Control Cable Hot/Cold Lever Series 3 and Defender up to 2006. 50" Long. Needs to be Cut-Down for Series 3 use. Supersedes: HS-347941 and HS...

Heater Control Valve for Kodiak Mark II & III Series 2/2a

Half Shaft Rear Axle Left Hand.Series From 1958 to June of 1980. 10-Spline. Rover Axle.

Headlamp Mounting Kit with Chrome Retention Ring. OEM by Wipac. For Series 1-3 and Defender. For the more Original Steel Buckets used on Series, se...

Gear Assembly for Wiper Motor For Series 2a from VIN Suffix F, (1969), Series 3, and Defender up to 2001, (to VIN:1A622423). Fits Wiper Motor WW-RT...

Glass Fuse 15AMP 7.5AMP Continuous for Series 1-3

Galvanized Stays for Front Wings PAIR Series 2-3, 88" and 109".

Gasket Cork for Oil Sump Series 1 1.6L or 2.0L 1948-58