Aftermarket

Stainless Steel Alternator Adjuster Link Bracket for 2.25L 4 Cylinder Gas.Series 3, or for Series 2-3 Conversions to Alternators.Supersedes EE-568789.

Lucas OEM Relay Control Unit for High/Low Beam and Dip Function.Defender 1991 to 2010, From VIN HA705857 to AA999999.

Shim for Differential Pinion Bearing Inner 0.005" Early Land Rover Diff.Series 1 to 2a, 1948 to 64 approximately. New Old Stock.

Snapsac for Fastening Interior Trim Panels.For Defenders.12 Required per Door. For the Firtree Fastener that pushes into these, see DP-MWC1474 or D...

Oil Pump Assembly for 2.25L Gas or Diesel, 2.5L Gas or Diesel. Includes Shaft part number EP-ERR850.For Series 2, (1960on - Not for 1958-59), 2a an...

Gasket Cork Non-Adhesive Valve Cover.For the 2.0L and 2.25L Diesel Series 1 to 3, 1957 to 84.New Old Stock, OEM Made in the UK.Superseded by EG-ETC...

Air Filter for V8, 2.0L MPi, and 2.6L. For Defender 90/110 NAS V8 1993-97, Also for Defender 2.0L MPI Gas. Discovery 1 V8 EFI to VIN: LA081991, (to...

Stainless Steel Wiper Arm and 9" Blade, SINGLE. Left-Park Spoon Type. Fits Series 1, 1948-58; with a Single Individual Wiper Motor for the Driver t...

Packing Spacer for under Carburetor, (Solex).Series 1 1.6L and 2.0L 1948-58.

Bolt M6-1.0 x 20mm Stainless Steel Pan-Head Phillips.For Series 3 and Defender Mirror Arms to Hinges, (2 Required per Door/Mirror).You are purchasi...

Clevis Pin for Door Check Strap on Series 2 to 3 Front Doors, and Defender Rear Safari Door Check Strap.Plain Steel. Requires Cotter Pin FS-3359 an...

Choke Cable for Left Hand Drive Series 3 No Steering Lock.For Zenith Carburetors.30" Long Cable.

Reservoir for Power Steering Fluid.For Defender, Range Rover Classic, Discovery 1.Made in Germany.Supersedes SC-ANR6222 and SC-NTC2723.

Bottom Steering Arm for Steering Relay. For Series 1 to 3, 1954-84. Requires Bolt BN-BX607181Y8 and Nut BN-NY607041Y8.

Champion RN11YC Spark Plug for V8 EFI 3.5L, 3.9L, 4.0L and 4.2L.For NAS Defender 1993-97, Discovery 1 and Range Rover Classic.For later Discovery 2...

Door Window Aluminium Fixing Kit for One Front Door Top.All the Aluminium bits needed to properly install your windows.Series 2 to 3, 1958 to 84.Co...

PropShaft Rear for Defender 90 300Tdi and TD5, 1994-2006, and Defender 90 V8 from 1985 to 1998.You may want to consider new bolts and nuts for this...

Radiator Top Hose Series 1 1948-58 1.6L/2.0L. Rubber. Made in the UK. For the Original Cloth-Wrapped Hose, see EC-268037. For a Complete Kit of Top...

Bolt for Seat Belt at Seat Box Anchor Bracket.For Series 2a and 3. Fastens the Seat Belt to the Lower Corner Brackets, SB-345100/1.Note: Typically ...

Polyurethane Bushings Set for Panhard Rod. For Defender from VIN: 2A626646, (2002 on), and Discovery 2. Equivalent to SS-RBX101340.

Bypass Hose for 2.0L Engines Series 1 1954-58.Elbow-Type. Cotton re-inforced Rubber with Original Outer Wrap.For earlier straight type, see EC-212345.

Return Spring for Master Brake Cylinder Series 1, 1948-53 and Throttle/Accelerator Return Series 1, 1954-58.

Head Gasket Set for Series 1 1.6L Engine 1948-51. For a Bottom End Gasket Set see EG-270568BE (linked below).

Replacement Heater Core for Kodiak Mark 2 or 3 Heater. Note: This Heater Core measures 7-3/4" x 6" x 2". The original is 8" x 8" x 2-1/2". You will...

Viton O-Ring for Fuel Cooler Assembly.For Defender TD5 to 2004.If the Fuel Cooler is leaking, this may be the solution to the problem. A new clamp ...

Clevis Pin for Tailboard Chain.For Series 1-3.This Requires Split Cotter Pin FS-3958L (linked below).

Seat Belt Anchor Bracket Front Lower Right and Left Hand, PAIR.Hot-Dip Galvanized. For Series 1-3, and Defender.

Inner Left Hand Mud Shield Splash Guard Heavy Duty GalvanizedFor Late Series 2a & 3 Left Hand Drive Apr 1969 to '84Hot-Dip Galvanized, Made in ...

Inner Left Hand Mud Shield Splash GuardFor Late Series 2a & 3 Left Hand Drive Apr 1969 to '84Galvanized Steel, Made in the UK.

Inner Right Hand Mud Shield Splash Guard.For Late Series 2a & 3 Left Hand Drive Apr 1969 to '84Galvanized Steel, Made in the UK.

Rubber Washer for Rear Fuel Tank Mount.For Series 2-3 109" Station Wagon and Defender 110 or 130 to 1998, (to VIN: WA159806).4 Typically Required.F...

Bushing for Rocker Shaft 2.25/2.5L Gas to 110 Suff-B

Engine Bay Decal Air Cleaner "Wash Thoroughly…"

Engine Bay Decal Oil Bath Cleaner Instructions

Engine Bay Decal Set for Series 2, 2a, 3

This is your oil change in a box! This premium 3 Brothers kit includes 10 litres of Castrol 20W50 High Zinc Oil - 7 litres for your standard oil c...

This is your oil change in a box! This 3 Brothers kit includes 10 litres of Castrol 20W50 High Zinc Oil - 7 litres for your standard oil change an...

This is your oil change in a box! This Premium 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, 1 litre of Castrol Classic EP90 AP...

Brake Shoes Axle Set 11" Rear, OEM Ferodo.Rear Series 1 107" with 11" Brakes, All Rear Series 1-3 109", Rear Defender 110/130" up to 1993, 6 Cylind...

Exhaust Bracket Kit for Series 2a 109" Regular 3-Door and Truck Cab 2-Door, to 1973, Right-Exit Muffler.3 Bracket Kit.

Ancilliary Drive Pulley Tensioner Assembly.For 300Tdi, Defender, Discovery 1.Note: This Mounts beside the Water Pump. Not for AC Belt, see EP-ERR7296.

Fiber Washer for Rocker Cover Bolts Series 1 1948-58.3 Required.

Peg for LT76 Gearbox Mainshaft Series 1-3, 1948-84. For the other Peg, see GT-6405 (linked below). Supersedes GT-09561.

Shim for Pinion Bearing Inner 0.020"Early Land Rover Differential up to end of Axle Suffix A, Feb 1964.

Shim for Pinion Bearing Inner 0.005" Early Land Rover Differential Axle Suff-A.

Special Bolt to hold Breather Cap on Rocker Cover.For Series 1-3 1956-84.

Coolant Expansion Tank Unit Clear.You Can See the Coolant Level without Removing the Cap!Note: Cap is Not included, see EC-NTC7161 (linked below).F...

Windscreen/Windshield Defender Tinted Laminated 1983-16. Recommend fitting with a new seal, SL-LR056278. *Note: a $40 surcharge for additional pack...