Aftermarket

Delphi Brake Pad Set Front with Wear Sensor for Vented Rotors.For Discovery 1, 1994-99.Range Rover Classic 1990-95.Supersedes BB-STC9190, BB-RTC6781.

Delphi Brake Pad Set, Front.For Discovery 2 and Range Rover P38.Delphi OEM Quality. Includes the little Bolts.

Delphi PAIR Brake Rotor Rear Solid Defender 110/130 to WA159806 (1998).

Differential Crown Wheel and Pinion for Series 1-3 1950-84.

Differential Guard for Rover Axle 2-Bolt Galvanized.Series 1-3, Defender Rover Axle, Discovery 1, and Range Rover Classic.

Differential Repair Pan for Rear with Filler Plug Series 2-3

Diaphragm for Crankcase Emissions Vent Control (PCV Valve)For Late Series 2a and Series 3 For the Complete Assembly, see EP-RTC6855 (linked below).

Detent Ball for Selector Shaft on LT230 Gearbox

Delphi OEM Wheel Cylinder Left Hand. (2 Required per Side) Front 11" Brakes on Series 3 88" June 1980 to 1984 Front 11" Brakes on Series 1, 2, 2a, ...

Distributor Cap 2.25L 4 Cyl for Ducellier Distributor

Copper Seal for Turbo Oil Pipes Various Applications.

Cylinder Head Overhaul Kit for Series 2, 2a, 3 up to 1974, 2.25L GasEverything needed to do a Valve Job.

Delay Relay for Wiper MotorDefender from 1993, RRC from VIN: FA351847 (1989), Discovery 1 up to VIN: JA034313 (1992).Originals were red in colour.....

Copper-Nickel Brake Set Series 2a 109" NADA 6-Cyl LHD 1967-68Note: If you still have a working Remote Brake Servo, this Kit Does Not Include the Pi...

Copper-Nickel Brake Set Series 1 86" SWB LHD 1954-1956All Pipes in this kit are 3/16" Copper-Nickel with UNF Brass Fittings.Includes Plastic Pipe S...

Cylinder Head Bolt for 2.25L Series 2-3 Engine. OEM. Note: You are purchasing 1, not 10 as shown in the photo.

Corteco Oil Seal Diff Pinion Rover Axle, Def 97on, D1, D2, RRC

CV Joint Outer Axle 23 Spline.For Land Rover Defender 90/110/130, 1984-93, Axle Code 20L.Includes a Packet of Grease and the Circlip, AD-RTC4820.

Crankcase Emissions Vent Control (PCV) Assembly For late Series 2a and Series 3. For the Diaphragm Only, see EP-RTC6855DIA (linked below). Supersed...

Cover Plate for Series 3 Transfer Case and Series 1-2a PTO Selector. New old stock, some surface rust present.

Defender Gear Gaiter Black - Leather Look Instead of Rubber Smarten your up your Defender's Interior with a new Britpart Gaiter! For the Standard R...

Polished Defender Alloy Gear and Transfer Knob Set for LT77 and LT85 Gearbox.Fits Defenders up to and including 200Tdi, 1983-94.For the later R380,...

Defender Lamp Kit Frt/Rear/Side 300Tdi/TD5 to WA159806

CV Joint Repair Kit for Defenders from 1994 through to the Pumas in 2007.Fits non-ABS and ABS with 24 spline axles.

Copper Nickel Pipe Reservoir to Brake Master Cylinder, 107"/109", 1954-58.Copper-Nickel 1/4" pipe for use on;Series 1, 107"/109" LWB Left-Hand Driv...

Clutch Slave Cylinder for Defender and Discovery 2.300Tdi from Gearbox 56A0669087K (1999)TD5 up to 2007OEM AP.

Clutch Hose Defender TD5, 90/110 V8, D1, RRC V8

Clutch Slave CylinderFor Stage 1 V8, LR 90/110 V8 and Defender V8 NAS, with LT77, LT85, and R380 Gearbox.Supersedes CC-UKC8677 and CC-UKC8677L, (No...

Clutch Friction Plate and Cover/Pressure Plate.For TD5 Defender, and TD5 Discovery 2.OEM Valeo Clutch Kit.Note: No Bearing. See CC-FTC5200. For Fly...

Clutch Pedal Assist Kit Spring and BushingsDefender 1994onReplace the old clutch pedal spring kit to assit the pressing of the clutch pedal on Defe...

Clutch Release Fork Kit. For Defender V8 and TD5 with R380 Gearbox. All the Little Bits and Pieces that You Will Need to Replace the Clutch Fork.

Clutch Release Fork.For Series 3 4 Cylinder or Stage 1 V8.Discovery 1 LT77 V8 up to VIN KS045958.Discovery 2 V8 and TD5 with the R380.Range Rover C...

Clip for Plastic Grill on Series 32 Required.

Exhaust System for Series 1 107/109" 2.0L 1954-58. This kit fits: Series 1, LWB 107" or 109" all Gas or Diesel models 1954 to 1958. Includes Bolts,...

Complete Exhaust System for Series 1 86/88" 2.0L 1954-58. This kit fits: Series 1, SWB 86" or 88" all Gas or Diesel models 1954 to 1958. The Tailpi...

Brake and Clutch Reservoir, All Metal. Genuine Girling. For Series 2, 2a 88" and 109", 1958-67. Made in the UK. For the label, see DB-BRGIRLING.

Cap for Front Wiper Arm Defender 2002-2016.

Chain Galvanized for Tailgate 28mm 20-Links Series/Defender. OEM.

Check Rod for the Rear Safari Door on the Series 2, 2a, 3 and early Land Rover 90/110's. Sometimes referred to as a "limit arm" or "rear door stay"...

Cap for Clutch Release Pivot Pin for R380 TD5 & V8

Channel Seal for Split Calipers, 90, D1 to 94, RRC to 87

Captive Nut for Defender Seatbase, Sill Channel, and other uses. 6mm Nut.Supersedes FS-NK106081.

Circlip for Rear Output Shaft Flange of Gearbox Series 1-3

Circlip for Front Output Bearing 1948-84, & LT95 Frt O/P Shft

Clevis for LT230 Transfer Linkage

Chrome Outer Headlamp Rim.For Series 1-2a, Up to 1969. For Headlamps in the Breakfast, (Grill), and Bugeyes.For a Pair of these, see LA-142001PR.

Castrol Classic Oils Nostalgic Pouring Jug Half Pint

Bulb-Holder 3-Pin 21W Stop/TailDefender 1995on, Discovery 1, Discovery 2, RR P38