Aftermarket

Fuel Tank Sender Unit for Diesel Rear Tank 109 Station Wagon.Series 2a to 3, 1967-74. New Old Stock; No Longer Available.

Fuel Filler Extension Tube Defender 90/110/130. New Old Stock. For the Filler Assembly, see EF-NTC2676 (linked below).

Diesel Injector Assembly Rebuilt - New Old Stock.Only 2 Left!Direct fit for Series 2a-3, from March 1968, 2.25L Diesel, Defender 2.25L and 2.5L Nat...

Injector Assembly Series 2a, 2.25L Diesel up to Engine Suffix J (to 1968), Rebuilt. New Old Stock. May have some surface rust, but this will not af...

Olive for 5/16" Fuel Pipes. Various Applications Series and Early Land Rover 90/110 OEM. These have the groove in the outer middle. For the normal,...

Hose Clamp 3/4" - 1-5/8" Diameter x 1/2" Bandwidth.All Stainless - Various Uses.

Intercooler Assembly for 300Tdi.For Defender, Discovery 1, and Range Rover Classic.

Under Seat Tool Box 2mm Aluminium.Fits Series 2-3 and Defender, Right Hand Side.Made in the UK out of 2mm thick aluminium, machine cut and CNC pres...

Breather Hose for Fuel Filler Neck.For Defender from VIN: XA159807 to 8A760581, (1999-2008).

Air Filter LR3 and RRS L320

Filter Element for Pollen Air Intake LR3, LR4, RRS L320

Crank Shaft Thrust Washer .010 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Nat...

Crank Shaft Thrust Washer .0075 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Na...

Crank Shaft Thrust Washer .0050 Over-Size Set.For All 4 Cylinder Engines, 1961 to 1998.Fits Series 2a-3 2.25 Gas or Diesel.Defender 2.5 Gas, 2.5 Na...

Ignition Coil Pack 4.0/4.6L Discovery 2 and Range Rover P38 with Bosch Ignition. Typically 2 are Required. For the Gems Ignition V8, see EE-ERR6269...

Oil Pressure Warning Switch for all 4 cylinder Defenders(1985 to 1998)

Steering Shaft Lower for Defender to VIN: VA133508 (1997).Requires Upper and Lower U-Joints, SC-NRC7387 and SC-NRC7704.For the later, (1997-06), St...

Rubber Dust Cover Boot Grommet for Hand Brake.For Series 1-2a, 1948-64.For the later Dust Cover, see BB-515466.

Lock Cover - Mounting Plate for Door Lock, Left or Right Hand.For Series 2 to 2a, Early Door Handles with Detachable Inner Door Handle Assembly.New...

Outer Door Handle Left Hand, Slam Type Handle.Fits Series 1/2/2a 1954 to 64. For Early Type Door Handle with Detachable Inner Handle.New Old Stock ...

Door Inner Handle Assembly Right Hand Slam-Type Handle.For Original Series 2 to 2a, 1958-64, Door Handle with Detachable Inner Handle.New Old Stock...

Hose Clamp 1-1/4" - 2-1/4" Diameter x 1/2" Bandwidth Stainless Various Uses

Door Handle Assembly Right Hand with Interior Button Lock.Slam-Type Door Handle. For Series 2-3.Bearmach - New Old Stock. Clearance.

Ring Gear for Flywheel on 2.0L Diesel.For Series 1 & 2, 1957 to 1961.New Old Stock - Made in the UK.

Castrol Baseball Cap Green with Embroidered Castrol Logo

Radiator for TD5 Defender to 1A622423 (2001MY) with Valve.After Use EC-PCC001020 for TD5 with EGR or Puma TDCi.

Radiator Hose Top for Defender 300Tdi.For a Complete Kit of all 3 Hoses with clamps, see EC-HOSEKITD3C.

Terrafirma Big-Bore Standard Travel Rear Expedition ShockDefender, Discovery 1, RRC Terrafirma Big Bore Expedition Standard Travel Twin Tube Oil Fi...

Terrafirma Big-Bore Standard Travel Front Expedition ShockFor Defender, Discovery 1, RRC Terrafirma Big Bore Expedition Standard Travel Twin Tube O...

Front Door Bottom Weather Strip Rivet-On Left Side. For Series 2-3, 1958-84. This Rivets to the Left-Hand Door Sill. Requires 10x RV-78248 Pop Rive...

All Wheel Trim Front Header Rail on Windscreen GalvanizedRequired for adding a Canvas Hood/Top. Typically included in Hoop Sets.For Series 2-3, 195...

Snapsac for Front Door Trim Defender 90/110 1988 Onwards. OEM.Used with Plastic Rivet DP-MWC9918pma.

Fuel cut-off solenoid (stop solenoid) mounted on the fuel injection pump for Defender 200Tdi and 300Tdi engines.  Also for the Discovery 1, and Ran...

Bolt Short for 300Tdi Water Pump M8x30 and Other Uses.For a kit of all 8 required bolts, see EC-3BCR248.

Bushing for Front Radius Arm to Chassis.For Defender to VIN: VA130784 (1997), Discovery 1, and RRC.Typically 4 Required. For Later Bushing see SS-A...

Water Pump for 2.5NA, 2.5TD, 2.5 Gas, w/AC and Viscous Fan

Plug for Fuel Tank Diesel Breather Pipe. Fits Defender 110 Steel Tanks, and RRC 1986 On. Used to plug the Breather pipe. Requires Union Nut EF-NRC9...

Service Kit for Fairey Free Wheeling Hubs Pair.Does either the 10 or 24 Spline Hubs.

Cover for Front Suspension Inner Wheel Well Defender

Serpentine Belt for RR P38 4.0/4.6L 1995-98 w A/C Dayco

Nutsert for Rear Door Grab Handle Defender 2007on

All Wheel Trim Canvas Bikini Hood Sand. Bikini cab hoods are similar to the truck cab hoods but have the bikini top piece fitted so it comes out at...

Clutch Kit, Friction Plate, Cover/Pressure Plate, and Bearing, for TD5, Borg and Beck, Made in GB.For Defender and Discovery 2 with the TD5.Note: F...

Pulley for AC Ancillary Drive Tensioner. For 300Tdi Defender, Discovery 1 and RRC. For a Kit with the Bolt and Bearing Covers, see EP-ERR7387 (link...

Bracket for 300Tdi AC Tensioner Pulley.For 300Tdi, Defender, Discovery 1, and RRC.For the Pulley, Bolt and Covers, see EP-ERR7387 (linked below).

Pulley with Bolt and Covers for AC Tensioner Ancilliary Drive. For 300Tdi, Defender, Discovery 1, and RRC. See EP-ERR7296 for Pulley Only (linked b...

Classic Defender 110 XS 5-Door Fire & Ice Side Steps Silver PairThese chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look g...

Thermostat Housing 2.25L Gas or Diesel Series 2a-31961-84, OEM.