New products

Shackle Bolt for Rear of Front Spring - 9/16" UNF 88/109

Shackle Bolt for Rear of Rear Spring - 9/16 UNF 88/107/109

Nylon Lock Nut for Shackle Pins 9/16" UNF

Rear Spring Shackle Plate Plain For 109" LWB

Rear Spring Shackle Threaded 9/16" UNF. Inner Shackle for Series 1-3, 88" and 107".

Rear Spring Shackle Plain 9/16" UNF for 88" & 107"

Front Spring Shackle Plate Threaded 9/16" UNF.Inner Shackle for Series 2a-3, 88" and 109", From March 1963, Suffix B on.

Front Chassis Bushing for Series 3 109" Chassis Series 3 109" 1971-84, (or replacement chassis)

Spring Bushing (Front or Rear), or Rear Chassis Bushing.Series 1-3, Front Springs: 1952-84. Rear Springs: 1954-84. Rear Chassis: 1954-84.Supersedes...

Replacement Shock Absorber Bushing Set, Polyurethane Yellow,For 109" Lower of the Rear Shock, (1 Set does both Rear Shocks),

Replacement Shock Absorber Bushing, Standard For Lower Front or Rear Shocks 90/109/110 2 Required per Shock.

Replacement Shock Absorber Bushing Set, Polyurethane Yellow.For 88" Upper and Lower, Front or Rear Shocks, (1 Set required per Shock).For 109" Uppe...

Replacement Shock Absorber Bushing Standard For 88" Upper and Lower, Front or Rear Shocks, (4 required per Shock)For 109" Upper and Lower of Front ...

Shock Absorber Rear 109" 1-Ton w/Bushings

Shock Absorber - 109" 1-Ton Suspension Front Includes Bushings

Shock Absorber - Series 2-3 109" Heavy Duty Rear Includes Bushings

Shock Absorber 107 and 109 Heavy-Duty Front with Bushings

Key Washer for Hub Bearing Series 1 Front, Series 2-3 Front & Rear. OEM.

Everything you need to affix your door cards properly to your door.This kit does one door, either front, or middle, not the rear safari doors.That'...

Service Kit for 300Tdi Oil, Air, Fuel Filters, Washers

Wing Mirror 4 1/2" Round with Standard 6" Arm - Each.For Series 1-3

Heavy-Duty Door Mounted Mirror Arm, (for Series 3 Doors, 1971-84)Use with GM-DA2130 7"x5" Mirror Head and Series 3 / Defender Upper Hinges with Mou...

Standard 6" Mirror Arm Series 1 - 3, EachTypically mounted on the Front Wings. Sometimes on the Military Series 2/2a Door Hinges that are impossibl...

Accelerator/Gas Pedal Replacement Rubber Series 2 to 3

Brake or Clutch Pedal Rubber Series 2-3

Rear Seat Assembly, Black Frame with Black Vinyl Cushion and Back For Series 2-3 88" or 109" Station Wagon, Defender 90/110SW (81cm wide bench seat...

Terrafirma Cubby Box for Series or Defender, Black Vinyl on Black Vinyl.For Series 2-3 or Defender 90/110/130. Black Vinyl Lid and Box, 2 Cup Holde...

Deluxe Front Seat Set (two sets of outer seats, 1 set of middle) For Series 2-3 88" or 109". Deluxe-style in Black Vinyl Cushions and Backs. For Se...

Standard Front Seat Set (two sets of outer seats, 1 set of middle)For Series 2-3 88" Fixed Seat Frames. Black Vinyl Cushions and Pin-Fitment Backs.

Wing Outer Front Aluminium LH 1958-71 & S3 LHD

Front Outer Wing Panel Aluminium Right Hand with Hole.Series 2 to 3, 1958 to 1984.Note: The Hole for the Heater Air Intake is 5" in Diameter, suita...

Front Outer Wing Panel Aluminium Right Hand.Series 2 and 2a, 1958 to 1968.No Hole for Heater Air Intake. Typically seen on Series 2 or non-NAS "Exp...

Switch for Side and Head Lights or Smiths Heater Fan Switch.For Series 2a-3, 1967-84.Lucas 31788 Pattern.For Earlier Series Ignition / Headlamp Swi...

Toggle Switch for Dash, Interior, Wipers, and Other Uses.Single Pole Single Throw. Series 1-3.

Flasher Unit for Turn Signal 2-Pin For Series 3 1971-84, Defender to LA939975 (1994).

Flasher Unit for Turn Signal 3-Pin.For Series 1-2a, 1954 - 1971.