New products

Front Right-Hand Door Rivet-On Rubber Seal Kit for Series 2-3 88"/109" Rivet-On Door Seal Kit. Original-Style Rubber Strips with Metal Inserts. Pop...

Door Rubber Sold by the Meter (Glue-On) Series 2-3

Shim for Door Hinge (Both-Ends, New Style Hinges).For Series that have been replaced with the later Puma Hinges, and Defenders.

Plastic Seal for Door Hinge Bolts Door-Side Series 3, 90/110

Hinge Gasket for Door Hinge to Bulkhead Series 3 Def to 1997

Hinge to Door Screw 2" Long for Series 3 and Defender Hinges up to 2006, OEM This is the longer screw that holds the Hinge to the Door. For the sho...

Captive Nut Door Hinge to BulkheadFor Series 3 and Defender up to 1998, and earlier bulkheads repaired with New Door Posts.OEM. These are UNF Threa...

Hinge to Bulkhead Screw 1.5" Long for Series 3 and Defender Hinge, OEMThis is the shorter screw that holds the Hinge to the Bulkhead. For the longe...

Stainless Steel Rear Safari Door Bolt Kit For Series 2, 2a, 3 Rear Safari Door, (note - typically only 2 hinges), and Defender Rear Safari Door wit...

Stainless Steel Front/Middle 4-Door Bolt KitFor Series 3 109" 5-Door Station Wagon, Defender 110 5-Door Station Wagon, and Defender 130 Crew Cab.In...

Original Hinge Pin Kit for Series 2 and 2a Slotted Screw Head and Lock Tab Washer. For Front, Middle Door Hinges and 2-Hinge or 3-Hinge Rear Safari...

Window Lock for Front Door Sliding Window Series 2-3 58-72

Door Lock Interior Button Latch Left Hand.For Series 2-3 Slam-Type Handles.

Door Lock Interior Button Latch Right Hand.For Series 2-3 Slam-Type Handles.

Barrel Locks and Keys 3 Sets for Series 2-3 Doors.Fits Slam Type Handles 337801 and 337802 and Rear Safari Door.Keys are all Matched.

Barrel Locks and Keys 2 Sets for 337801/2 Series 2-3 Doors.Fits Slam Type Handles 337801 and 337802. Keys are all Matched.

Barrel Lock and Keys Replacement for Series 2-3 Doors.Fits Slam Type Handles 337801 or 337802.

Rubber Buffer (Puck) for Spare Wheel on Bonnet Kit of 4. Series 1-3.

Terrafirma Heavy Duty Drive Flange Member, Early-Type. PAIR.Early Thick Type for Defender, replacing FRC5806 up to VIN KA930455, (1983-93).

Terrafirma Extented Poly Bump Stops PAIR Red For Defender, Discovery 1, and RRC.

Inner Door Handle Left hand side for the Land Rover 90/110 (from 1986 onward), Defender and RRC 2-Dr from 1989 onwards.

Tie Rod End for Track Rod, Drag Link or Longitudinal TubeLeft Hand Thread with Grease Nipple. Threaded Shoulder. Series 3. 1974-84.

Tie Rod End for Track Rod, Drag Link or Longitudinal Tube.Left Hand Thread Series 3 1974-84 Threaded Shoulder.

Tie Rod End for Track Rod, Drag Link or Longitudinal TubeRight Hand Thread with Grease Nipple. Threaded Shoulder. Series 3. 1974-84.

Tie Rod End for Track Rod, Drag Link or Longitudinal Tube.Right Hand Thread Series 3 1974-84 Threaded Shoulder.

PAIR of Front Vent Rubber Seal Series 2-3 and Defender.(These are the fit to bulkhead type, with Grooves for the Vents to seal into).

Tie Rod End for Steering Track Rod, Drag Link or Longitudinal Tube.Left Hand Thread, Series 1-3 1948-July 74, Unthreaded Shoulder.See 2nd Photo for...

Tie Rod End for Steering Track Rod, Drag Link or Longitudinal Tube.Right Hand Thread, Series 1-3 1948-July 74, Unthreaded Shoulder.See 2nd Photo fo...

Steering Rod Clamp Kit, (Clamp, Grade 8 Bolt and Philidas All-Metal Lock Nut).For Steering Track and Drag Link Tie Rod Ends. For Series 1 to 3, Def...

Steering Longitudinal Tube with Ends Series 2a and 3. For the Steering Box to the Steering Relay with Tie-Rod Ends. 1961-1984.

Steering Drag Link with Damper Bracket, (28 3/4") Series 2, 2a, 3.Note on the Damper Bracket. In order to install a Steering Damper Shock, your Cha...

Steering Track Rod Tube 43 1/8" for Series 3, from July 1974 from Series 3 Axle Suffix F, July 1974. For Threaded Shoulder Tie-Rod Ends.

Steering Track Rod Tube 43 3/4" for Series 2 & Early 2a, 1958-1962 For pendant type ball joints, (Steering Levers on Top of Swivel Housings). ...

Heavy Duty Steering Track Rod, Drag Link and Greasable Tie-Rod Ends.Suitable for Series 2 through Series 3, (1958 to 1984). Excellent product!

Heavy Duty Steering Track Rod and Drag Link with Ends.Suitable for Series 2 through Series 3, (1958 to 1984). Excellent product!

Rear Spring Shackle Plate Threaded - 9/16" UNF For 109"

Shackle Bolt for Front-End of Front Spring and Front-End of Rear Spring 9/16" UNF For 88" and 109"

Shackle Bolt for Rear of Front Spring - 9/16" UNF 88/109

Shackle Bolt for Rear of Rear Spring - 9/16 UNF 88/107/109

Nylon Lock Nut for Shackle Pins 9/16" UNF

Rear Spring Shackle Plate Plain For 109" LWB

Rear Spring Shackle Threaded 9/16" UNF. Inner Shackle for Series 1-3, 88" and 107".

Rear Spring Shackle Plain 9/16" UNF for 88" & 107"

Front Spring Shackle Plate Threaded 9/16" UNF.Inner Shackle for Series 2a-3, 88" and 109", From March 1963, Suffix B on.

Front Chassis Bushing for Series 3 109" Chassis Series 3 109" 1971-84, (or replacement chassis)

Spring Bushing (Front or Rear), or Rear Chassis Bushing.Series 1-3, Front Springs: 1952-84. Rear Springs: 1954-84. Rear Chassis: 1954-84.Supersedes...

Replacement Shock Absorber Bushing Set, Polyurethane Yellow,For 109" Lower of the Rear Shock, (1 Set does both Rear Shocks),

Replacement Shock Absorber Bushing, Standard For Lower Front or Rear Shocks 90/109/110 2 Required per Shock.