Newest Products

Heater Hose Inlet for 200/300Tdi D1 89-98, RRC 92-94

Heater Hose Inlet Defender 90/110 LHD 300Tdi

Heater Hose Return Defender Left Hand Drive 300Tdi

Heater Hose Inlet Defender 90/110 RHD 300Tdi

Heater Hose Return Defender Right Hand Drive 300Tdi.

Heater Hose Matrix Outlet to Pipe RRC 87-94, D1 89-98

Heater Hose Matrix Inlet to Pipe RRC 87-94, D1 89-98

Heater Hose Inlet V8 Carb RRC, Defender, D1 V-GA449988on

Heater Hose Inlet Defender TD5 LHD

Control Cable for Heater Outlet Main Air Valve. Actuated when turning on the Blower.For Defender to VIN: 2A633474, 2002.For later see HS-JFF000140 ...

Heater Matrix for Defender - Downward In/Out Pipes Up to VIN:WA159806, 1998, If your Heater has Horizontal In/Out Pipes, see HS-UTP1725 (linked bel...

Heater Control Valve Assembly for Series 3 LHD or RHDOEM, Made in the UK.

Heater Control Valve, Brass for Series 2, 2a 1958-71. The Copper Seal needed for this is CS-243959 (linked below).

Adapter Pipe for Rear Heater Hose to Engine Cylinder HeadSeries and Defender. Gas and Diesel.OEMThe Thread on this Adapter is 3/8" BSF.Requires Cop...

Heater Hose Pipe to Head LHD Series 3

Heater Hose Heater Core to Block RHD Series 3

Heater Hose Valve to Pipe for Series 3 LH and RHD

Heater Hose Core In/Out to Pipes for Late Series 2a and 3 Smiths Type Heater.For 4 and 6 Cylinder Left Hand and Right Hand Drive.2 Required for LHD...

Trunnion for Heater Air Control Cable Series 3 and 90/110

Defrost Demister Vent Dash Top Cover.For Series 3, 1975 to 84.These are 10.75" wide, adaptable for the early Defender vents, (to 1988), HS-MTC6040,...

Heater Air Duct Outlet to Floor LH Series 3 / Defender to '06

Heater Air Duct Outlet to Floor RH Series 3 / Defender to '06

Knob for Hot/Cold on Heater Control Series 3 Genuine

Series 3 Demister Tube (RH or LH) 2 Required

Heater Intake Seal to Front Wing Series 2a/3 1972-84.Quality Made from High Density 1/2" Neoprene Foam. Made in Canada!

Air Hose for Heater Blower to Heater Unit, OEM.For Series 2a to 3; Smiths 2-Piece Heater Assembly. This hose connects the Heater Blower to the Heat...

Front Outer Wing Trim for Heater Air Intake.For Series 3, Plastic and Metal Grill.Note: This is for the 5" Hole in the Front Outer Right Hand Wing,...

Rubber Grommet for Heater Box Hoses Series 3 1971-84

Rubber Grommet for Heater Box Hoses Series 3 1971-84

Screw for Heater Trunnion on Valve Series 3

Retaining Clip for Heater Control Cables 90/110 to 2006 OEM.  You generally need two of these. Note: You are purchasing 1, not 10 as shown in the p...

Staple for Hood Strap on Rear Tub and on Windscreen Rail.For Series and Defender.You are Purchasing 1, not 10 as shown in photo.

Spring Pin for MTC4583 Spindle for Handle - Hood Header You are purchasing one, not ten as shown in the picture

Spring for MTC4583 Spindle for Handle Fixing Hood Header

Exmoor Trim 88"/109" Bikini Hood Stick Set Series 2-3For the Canvas Bikini Tops to go with this, type "Bikini" in the search window.

Universal Joint Heavy Duty Greasable.Fits Defender 90, on both the front and rear from VIN CA252578 to 1A612044, (to 2001).Defender 110/130 All Rea...

Battery Hold Down Frame for Series 1-3. For the J-Clamp Rods, see FS-562953L, or FS-562953Kit (linked bleow).

Rope Tie-Down (U-shape) on Rear Tub for Canvas Top. OEM.Zinc Coated. For Series 1-3 and Defender. Requires 2 Rivets, RV-RU612373.

Canvas Top 88" Full Hood with Side and Rear Windows Sand, for Series 2 to 3.All Wheel Trim Product. Long-Lasting, Excellent Quality!

Hood Stick Set for a Full Canvas Hood.Fits 88" SWB Series 2-3, 1958-84.Can also be used for the Bikini Hoods by removing the rear hoop and cross bars.

Front Rope Tie-Down for Full Hood 88/109" Left Hand. Properly Galvanized. See HH-330578 for the Right Hand Side (linked below left); or, For a Kit ...

Front Rope Tie-Down for Full Hood 88/109" Right Hand. Properly Galvanized. See HH-330579 for the Left Hand Side (linked below left); or, For a Kit ...

Clamp Arm (Claw Hook) for Securing Hoop Stick to Tub.For Series 1-3 and Defender.

Rope Cleat for Side of Rear Tub Series and Defender (Rivet-on). You'll need 2 or 3 Rivets RV-78248 to fasten to the body side.Normally you require ...

Hose Clamp 3" - 4" Diameter x 1/2" Bandwidth All Stainless For Various Uses.

Hose Clamp 2-3/4" to 3-3/4" Diameter x 1/2" Bandwidth Stainless Steel Band.For Various Uses.

Hose Clamp 2-1/2"-3-1/2" Diameter x 9/16" Bandwidth Stainless for Various Uses.

Hose Clamp 2-1/4"- 3-1/4" Diameter x 1/2" Bandwidth All Stainless Various Uses