Newest Products

Universal Joint, (U-Joint), for Front Half Shaft.For Series 1-3, from 1953 to '84.Supersedes AD-242521, AD-GUJ118, AD-RTC5964.

GKN OEM Universal Joint for Front Half Shaft.For Series 1-3, from 1953 to '84.Supersedes AD-242521, AD-GUJ118, AD-RTC5964.

Drive Flange Gasket Front 1948-84 or Rear 1958-1984

Gasket for Stub Axle to Swivel Hub Front, Series 1 to 3, 1954-84

Gasket Paper for Stub Axle Rear.For Series 1 through 3, from 1957 to the end of 1984.

Gasket Paper for Swivel Hub to Axle Case 1948-1984

Swivel Hub Seal Retainer 1948 to 1984, Series 1-3.For a Kit with the Seals and Correct Bolts and Nuts, see SC-SOSKITST.

Swivel Hub Grease Sachet, 370 grams, sufficient for 1 swivel hub. Perfect solution for those leaky swivels. Not recommended if you wade through wat...

Hub Spanner Wrench for Hub Locking Nut 2-1/16" 52mm. For locknut FRC8700.

Hub Lock Washer. For Series 1-3, the whole run from 1948 through 1984. For Land Rover 90/110 and Defender Front Axles to VIN: KA930455, (1993) and ...

Hub Oil Seal - Metal and Rubber, Series 1 Rear Axle 1948-58.Series 1 with Semi-Floating Rear Axle Only.

Hub Oil Seal.Fits Series 1, 1948 to 58, Front Axle. Fits Rear Fully-Floating Axles on 109", and 88" with the optional full float axles from 1957 to...

Corteco OEM Hub Oil SealFits Series 1, 1948 to 58, Front Axle. Fits Rear Fully-Floating Axles on 109", and 88" with the optional full float axles f...

Felt Seal for Axle Shaft Front or Rear Hub Assembly1958 to 06/80. For Series 2-3. Series 1 Axles didn't use these for some reason.

Swivel Pin Bearing - Bottom of Swivel Housing. Series1-3.

Bearing for Half-Shaft Front 1954-1984 Series 1-3

Distance Piece for Half-Shaft Front (Bearing Holder) for Series trucks between 1954 through to the end in 1984.

Oil Seal for End of Front Axle Casing 1948-1984 Series 1-3

Axle Breather Valve Series 1-3 1948-84, and Range Rover Classic.

Gasket for Rover Differential, Front or Rear.For Series 1-3, Range Rover Classic 1970-95, Discovery 1 1989-98, Discovery 2 1999-04, Defender Front...

Thrust Washer for Differential Pinion Bearing Series 2a, 3, Land Rover 90/110, and /Defender OEM

Pinion Oil Seal for Rover Differential Front or Rear OEM For Series 1-3 1950-84l Supersedes AF-217507, AF-561360.

Mud shield for Front or Rear Rover Differential OEM

Brake Kit Front Axle Set, 4 Cylinder, 86/88", 10" Brakes, up to June '80, Kit includes; 1x STC2796 10" brake shoes axle set 1x 243296 right wheel c...

Brake Kit Rear Axle Set, 4 Cylinder, SWB 88", up to June '80 Kit includes; 1x STC2796 10" brake shoes axle set 1x 243302 right wheel cylinder, 1x...

Brake Kit Rear Axle Set, 4-Cylinder, SWB 88", from July '80** If Sold Out, Use BB-DA6042 (Exactly the same)**Kit includes;1x STC2796 10" brake shoe...

Brake Kit Rear Axle Set, 11" Brakes, Long Wheel Base 107" and 109", (4, 6 and 8 cylinder).Kit includes;1x STC2797 brake shoes axle set.1x 243296 ri...

Brake Adjuster Kit.Contains Parts to do 4 Adjusters. Does both Axles for 80"/86"/88" from 1948 up to June 1980. 6 Adjusters required for 88" from J...

Brake Shoes Axle Set 10" Front or Rear, Aftermarket.Fits Series 1 80", 86", and 107" Front with 10" Brakes.Series 2-3 88" Front up to June 1980.Ser...

Brake Shoes Axle Set 10" Front or Rear. OEM, Mintex.Fits Series 1 80", 86", and 107" Front with 10" Brakes.Series 2-3 88" Front up to June 1980.Ser...

Brake Shoes Axle Set 11" Rear.Rear 107" with 11" Brakes, All Rear 109", Rear Defender 110/130" up to 1993, 6 Cyl Nada Rear, and 101 FC Rear.

Brake Shoes Axle Set 11" Front. Allmakes.Front 107" w/11" Brakes, All Front 109" 4 Cyl, Front 88" from June 1980.

Upper Brake Spring for 10" Shoes. For use on, Series 1 to 3, Front 80", 86", 88", and 107" with 10" Front Brakes up to June 1980. Series 1 to 3 Rea...

Brake Spring, Lower for 10" Shoes. For use on: Series 1 to 3, Front 80", 86", 88", and 107" with 10" Front Brakes up to June 1980. Series 1 to 3 Re...

Brake Spring, for Front 11" Shoes on 109" LWB and 88" SWB from July/80 For use on; Front 109" LWB 4 and 6 Cylinder Engines Front 88" SWB from Ju...

Upper Rear Brake Spring.For use on;Series 2a-3 Rear 109" Long Wheel Base.Land Rover 110 and 130 up to 1993 (Rear Drum Brakes).

Lower Rear Brake Spring for;Series 2a-3 109" Rear 11" Shoes and Early Defender 110/130.

Brake Drum Screw Series 1-3 1948-1984 Each.For a Package of 10, see BB-1510-10.

Pair of Rubber Grommets and Felt Seals for Series 1 Pedals,For the Brake and Clutch.

Master Brake Cylinder CB Type.For 88" Short Wheel Base Series 2 and Early 2A, 1958-67, (Single Line System Without Brake Servo).

Brake Master Cylinder "CB-Type" Series 2, and Early 2a 109" Non-Servo.

Master Brake Cylinder CV-Type.For Series 2A 88" Short Wheel Base No-Servo Single-Line 1964-84.Also, the Clutch Master Cylinder for Series 2-2a, 195...

Master Brake TRW OEM Series 2A 88" No-Servo Single-Line 1968-80

Master Brake CV Type Series 2A 88" and 109" No-Servo Single-Line 1969-84 Used on 88" SWB from July 1980 to '84 Single Line systems. Used on 109" LW...

Master Brake Cylinder Series 2a-3, 109" Single Line with Servo- Assist and Reservoir, 1967-1980

Master Brake Cylinder 88" Dual Line with Servo, 1969-1980.North American Standard for Brake Systems with the Vacuum Boost Servo. Late 2a and Series...

Master Brake Cylinder 109" Dual Line with Servo, 1971-1980.North American Standard for Brake Systems with the Vacuum Boost Servo. Late 2a and Serie...

Master Brake Cylinder 88/109/90/110" Dual Line with Servo.Replaces NRC6096, used on late Series 3. Some Military, and Defender 90/110/130 non-ABS u...