Newest Products

Adjustable Panhard Rod with Yellow Poly Bushings.For Defender, Discovery 1, and RRC.For the Standard Panhard Rod, see SS-RBI500020.

Steel Shim 0.005" for Steering Box Series 1-3 1956-84See SC-271379 for Mylar 0.002" Shim.See SC-261857 for Paper Gasket 0.005".

Front Door Bottom Weather Strip Rivet-On Right Side, OEMFor Series 2-3, 1958-84.This Rivets to the Right Hand Door Sill. Requires 10x RV-78248 Pop ...

Front Door Bottom Weather Strip Rivet-On Right Side. For Series 2-3, 1958-84. This Rivets to the Right Hand Door Sill. Requires 10x RV-78248 Pop Ri...

Front Door Bottom Weather Strip Rivet-On Left Side, OEMFor Series 2-3, 1958-84.This Rivets to the Left Hand Door Sill. Requires 10x RV-78248 Pop Ri...

LED Front Amber Indicator Lamp for Defender 1994on, OEM Wipac.73mm Diameter, Waterproof to IP67, E-Marked and SAE Approved, AMP Type Connector Fitt...

LED Front Clear Parking Lamp Assembly Defender 1994on Wipac73mm Diameter, Waterproof to IP67, E-Marked and SAE Approved, AMP Type Connector Fitted,...

Bushing for Front of Radius Arm to Axle.For Defender from VIN: LA930456, (1994MY on), and RRC 1986-94 . 44/52mm Wide.4 typically required.For Earli...

Master Cylinder Series 1 107/109" 11" Brakes 1955-58.3 Bolt Hole Mount. 1" Bore. 1 Bolt at Bottom.Note: You must have the original post to use with...

Heater Control Bypass-Type Valve for Series 3 Stage 1 V8.Alternative to the no longer available valve.Note: You will need to make some modification...

Switch for Rear Fog Lamp Rocker-Type.For Defender from VIN:MA949744 (1996) to VIN: 1A999999 (2001).Supersedes BE-AMR5085.

Power Steering Hose Reservoir to Pump 300Tdi Defender

Power Steering Hose Pump to Box.For Defender LHD 300Tdi, Discovery 1 LHD V8.

Rear Suspension Shackles Kit.For 86" and 88" Series 1-3, 1956-84.Shackles, Bolts and Nuts for mounting Rear Springs.

Cylinder Head Gasket Set for V8 Carburetted.For Series 3 Stage 1 109 V8, 101FC, and RRC to1991.With Steel Head Gaskets.For Bottom End Gasket Set, s...

Gasket Exhaust Manifold Series 1, 1.6L and 2.0L, 1948-58.And 2.6L 6 Cylinder NADA Engine.Note: Package includes 3 Gaskets, Series 1 only requires O...

Cylinder Head Bolt Set for V8 EFI 3.9, 4.0, 4.2, 4.6L, OEM For Defender, Discovery 1 and 2, RRC and RR P38 with the V8 EFI Engine. For the Head Gas...

Gasket Set Cylinder Head V8 3.9, 4.0, 4.2, 4.6L. Composite Head Gaskets. Fits Defender, Discovery 1 and 2, RRC and RR P38. All V8 EFI Engines. You ...

Bottom End Gasket Set for V8 Carbureted. For Series 3 Stage 1 109 V8, 101FC, Discovery 1 to VIN: LA081991 (1994) and RRC non-EFI. For Top End Head ...

Gasket Front Timing Cover V8 3.5L, 3.9L, 4.2L Engine with V-Belts. Defender up to 1995. Discovery 1 up to VIN: LA081990 (1994). RRC up to 1994. Aft...

Timing Chain V8 3.5L, 3.9L, 4.0L, 4.6L OEM.Fits RRC, RR P38, Discovery 1 and 2, Defender V8.

Gasket Front Timing Cover Silicon-Beaded OEM. 4.0L 4.6L V8 with Serpentine Belt Defender, Discovery 1 and 2, RRC, RR P-38. For earlier Engine with ...

Gasket Set Bottom End for V8 3.9, 4.0, 4.2, and 4.6L EFI Engines.Discovery 1 and RRC.

Galvanized Expedition Rear Ladder for Series and Defender. No Drilling Required. Top Hooks on to the roof gutter, bottom bolts on the rear cross bo...

Brass Fill Plug for Radiator with O-Ring.For Defender upto 1996, Discovery 1, RRC, and RR P38.Also used on the Thermostat Housing for some models.

These top hat supports are for the underside of your bonnet on a Series 2 and 3.They are made from 1.2mm thick zintec coated mild steel, which are ...

Rocker Valve Cover Gasket Seal TD5.For Defender TD5 or Discovery 2 with TD5 up to VIN: 1A622423, (2001). Aftermarket, Made in Great Britain.For lat...

Gasket for Oil Filter Housing TD5.For Defender or Discovery 2 TD5.OEM Elring, Made in Great Britain.

Gasket Kit with Seals for Gearbox 5-Speed LT77.For Defender up to Vin: LA939975, (1994), Discovery 1, and RRC.

Head Gasket Set for 2.5L Naturally Aspirated Diesel, Land Rover 90, 110, Defender. Includes Head Gasket. For Bottom-End Gasket Set see EG-STC1559 (...

Bottom End Gasket Set for 2.5L Naturally Aspirated Diesel.Land Rover 90, 110, Defender.For Head Gasket Set see EG-STC1562.

Rubber Seal for Tailgate Vertical (LH or RH) Series 2-3 OEM

Copper Seal/Washer for Fuel Injector to Cylinder Head.For 200Tdi and 300Tdi. You are purchasing 1, not 10 as shown in the photo.

Water Pump with GasketFor Defender 200Tdi. This is not for the Discovery 200Tdi, see EC-RTC6395.

Bushing for Front of Radius Arm to Axle, OEM.For Defender from VIN: LA930456, (1994MY on), and RRC 1986-94 . 44/52mm Wide.4 typically required.For ...

Bolts, Nuts and Washers for the Bulkhead to the Chassis.Fits Series 1 to 3, 1948-84.

Fuel Filter for 200 Tdi and 300Tdi.Fits Defender, Discovery1 and RRC.Quality Aftermarket.

Fuel Filter for 200 Tdi and 300Tdi.Fits Defender, Discovery1 and RRC.OEM, Coopers Fiam.

Hose for Crankcase Breather on 300Tdi.For Defender, Discovery 1, and RRC with the 300Tdi.

Knob for Front Seat Recliner Mechanism DefenderBlack. OEM.

Seal for Windshield Glass and Rear Safari Door.For Series 2 to 3 Windscreen Glass, 1958-84, and Rear Safari Doors on Series and Defender 1958-2001....

Earth (Ground) Lead Connector for Lucas Bullet Terminals.Connects two wire bullet connectors to ground. Typically connected via small bolt and nut ...

Mirror Arm for Defender and Series 3 (from August, 1982).For Left or Right Hand side. Each Mirror Arm Requires 2 Pan-Head Screws that go in through...

Pair of Wing Mirrors 5"x7" with Standard 6" Arms,Fits Series 1-3. Typically mounted on the Front Wings. Sometimes on the Military Series 2/2a Door ...

Under Seat Box Near-Side (Left Hand Side) Series 2-3.Made in the UK out of 2mm thick aluminium and are machine cut and CNC pressed for accuracy of ...

YRM Front Wing to Inner Wing Mud Shield Angle Series 2-3 PairMade in the UK from 3mm Aluminium. To be Riveted or Panel Glued in place of those cor...

Push Fastener for Dash Trim Defender Slate-Grey Land Rover Genuine.

Stud for the Intake Manifold to the Exhaust Manifold,For the 2.25L Gas Engine, Series 2, 2a and 3.4 Required. For a Complete Kit with Bolts, Nuts, ...