Newest Products

Pulley for AC Ancillary Drive Tensioner. For 300Tdi Defender, Discovery 1 and RRC. For a Kit with the Bolt and Bearing Covers, see EP-ERR7387 (link...

Drive Belt Idler Pulley and Bracket. For TD5, Defender and Discovery 2 with the TD5.

Tensioner Pulley/Bracket for TD5. For Defender and Discovery 2 with the TD5. See EP-ERR6493 for top idler pulley, see EP-ERR6949 for ancillary idle...

Idler Pulley Assembly for Drive Belt. For Defender or Discovery 2 TD5 No A/C. This is the Fixed Pulley at the top; for Tensioner Pulley see EP-ERR6...

Clutch Kit, Friction Plate, Cover/Pressure Plate, and Bearing, for TD5, Borg and Beck, Made in GB.For Defender and Discovery 2 with the TD5.Note: F...

All Wheel Trim Canvas Bikini Cab Hood Black. Bikini cab hoods are similar to the truck cab hoods but have the bikini top piece fitted so it comes o...

All Wheel Trim Canvas Bikini Cab Hood Khaki. Bikini cab hoods are similar to the truck cab hoods but have the bikini top piece fitted so it comes o...

All Wheel Trim Canvas Bikini Hood Sand. Bikini cab hoods are similar to the truck cab hoods but have the bikini top piece fitted so it comes out at...

Foam Seal for Roof or Header Rail to Windscreen Outer.For Defender.For the Inner Seal, see SL-MTC4994. For the Corner Seals, see SL-LR055343. Yes, ...

Foam Seal Hardtop Roof Corner Defender.Land Rover Genuine.

Standard Bullet Connector Double - Joins 4 Bullets.aka: WH-RTC603.For a Complete Kit of Various Sized Bullet Ends and Connectors, see WH-AES160106.

Standard Bullet Connector Single - Joins 2 Bullets.aka: WH-3549L.For a Complete Kit of Various Sized Bullet Ends and Connectors, see WH-AES160106.

Pair of Chrome Outer Headlamp Rims.For Series 1-2a, Up to 1969. For Headlamps in the Breakfast, (Grill), and Bugeyes.

Bolt for Caliper M12 x 35mm (1.25" fine thread) . Fits Defender Front and Rear, 1994 onward. Discovery 1, Discovery 2, RRC, and RR-P38. Check your ...

Steering Drop Arm Ball Joint Remove and Fit Tool for Defender.Fit and remove SC-RBG000010 to a Defender drop arm without having to remove the arm f...

Nutsert for Rear Door Grab Handle Defender 2007on

Serpentine Belt for RR P38 4.0/4.6L 1995-98 w A/C Dayco

Oil Feed Pipe Assembly Turbo to InterCooler 300Tdi

Cover for Front Suspension Inner Wheel Well Defender

Bonnet Prop Arm Folding Type for DefenderOEM. Made in the UK.

Seal Rivet-On for Front Door Top against Roof S2-3 OEM

Service Kit for Fairey Free Wheeling Hubs Pair.Does either the 10 or 24 Spline Hubs.

Cork Seal for Fuel Sender, Pick-up or PumpFits Defender Steel Tank, and RRC Steel Tank.For better sealing alternative, see the later Steel and Sili...

Fuel Sender Unit for Defender 110 and 130 Diesel to 1992, (VIN: JA915357), and Gas to VIN ending in 243342. Fits Steel 110/130 Fuel Tanks. Requires...

Plug for Fuel Tank Diesel Breather Pipe. Fits Defender 110 Steel Tanks, and RRC 1986 On. Used to plug the Breather pipe. Requires Union Nut EF-NRC9...

Water Pump for 2.5NA, 2.5TD, 2.5 Gas, w/AC and Viscous Fan

Bushing Kit Polyurethane Yellow, Radius Arm to Axle.For Defender 1994on, and RRC 1986-94.

Bushing for Front Radius Arm to Chassis. For Defender from VIN: VA130785, (1997on). Typically 4 Required. For earlier see SS-NRC4514, or SS-DA2353 ...

Bushing for Front Radius Arm to Chassis.For Defender to VIN: VA130784 (1997), Discovery 1, and RRC.Typically 4 Required. For Later Bushing see SS-A...

Bushing Set Polyurethane Yellow Front Radius Arms to Chassis. Defender 1987 to 2006, Discovery 1, Range Rover Classic 1986-94.

Seal Metal and Silicon for Fuel Pump, Pickup or Return.OEM. For Defender and RRC Steel Tanks.A better sealing alternative to the EG-ESR3278 cork ga...

Bolt Short for 300Tdi Water Pump M8x30 and Other Uses.For a kit of all 8 required bolts, see EC-3BCR248.

Bolt Kit for 300Tdi Water Pump - 8 Bolts.Fits Defender, Discovery 1, and RRC 300Tdi.

Switch Fuel Cut Off for 200/300Tdi 90/110, D1, RRC

Screw for Door Striker Counter-Sunk Torx M6x40 Def 87on Supersedes DP-MXC9689 and DP-BYP100270 You are purchasing 1, not 10 as shown in the photo.

Snapsac for Front Door Trim Defender 90/110 1988 Onwards. OEM.Used with Plastic Rivet DP-MWC9918pma.

Seal Kit for Door Handle 90/110 1987-02 LH or RH (Allmakes)

Oil Filter Element and Seal. For Defender Puma Tdci 2.4L and 2.2L Up to VIN: DA444246 (2013).

Oil Filter Element and Seal.For Defender Puma Tdci 2.4L and 2.2L Up to VIN:DA444246 (2013).

Champion N12YC Spark Plug for 8:1 Compression Ratio Engines.For Series 2a-3, 2.25L, and 3.5L Carbureted V8, Series 3 Stage 1 and Defender.

Castrol Classic EP90 API GL4 Extreme Pressure Gear Oil 1Litre.Finally! The Right GL4 Gear Oil for your Landie!For Series 1 to 3, 1948-84, Gearbox, ...

Castrol Classic Window Service Sticker Self-Adhesive.3" Diameter. Never forget to change your oil with this self-cling window sticker with Castrol ...

Spacer for Door Striker Defender OEM.You are purchasing 1, not 5 as shown in the photo.

Washer Dished for Front Radius Arm to Chassis Def, D1, RRC

Sponge for Top of Fuel Tank.For Series 2-3 88 and 109 with Side Fuel Tank, 1958-84, and Defender 110 with Side Tank, 1983-98, to VIN: WA159806. See...

Gasket Seal for Filler Neck Under-Seat Fuel Tank.Two Seals Required; One required between the sponge, (see EF-504233), and the tank, and one requir...

Torsion Spring for Bell Crank Accelerator Linkage.For Solex Carburetor, Series 2-2a, 1958-69.

Mirror Glass Only Convex for Defender 8"x5" Mirrors.