Newest Products

Exhaust Bracket Kit for Series 2a 109" Regular 3-Door and Truck Cab 2-Door, to 1973, Right-Exit Muffler.3 Bracket Kit.

O-Ring for Oil Pick-up on 4.0L and 4.6L V8.

Bushing for Idler Gear in Oil Pump Series 1 1.6L and 2.0L, 1948-58.aka: EP-9049.

OEM Banjo Bolt for Oil Pipe from Block to Cylinder Head and Various Uses.Series 1 1.6L and 2.0L, 1948-58, (1 Required).Series 2-3, 2.25L 1958-84, (...

Copper Sealing Washer Crushable for Various Uses. OEM.For Series 1-3 Oil Banjo Bolts, Series 2-3 Oil Pressure Sending Unit, Discovery 1, Discovery ...

Locker Plate for Cam Shaft Bearings.For Series 1 1.6L and 2.0L, 1948-58.Typically 4 Required to Fix the Camshaft Bearings to the Cylinder Head.New ...

Locker Plate for Oil Feed Bolt to Distributor.For Series 1 1.6L and 2.0L, and Series 2a 2.6L 6 Cylinder.

Steel Ball for Oil Pump Relief Valve.For Series 1 2.0L Diesel and Series 2-3 2.25L Gas or Diesel.

Lock Washer for Timing Chain Damper.For Series 1 2.0L, and Series 2-3 2.25L and 2.6L Gas.Two Typically Required.Supersedes EP-278769.

Oil Feed Pipe Block to Cylinder Head OEM. For Series 2-3 2.25 Gas or Diesel, and Defender 2.5L Gas or Diesel. Requires 2x EP-597563 Banjo Bolts and...

Tappet Adjuster Screw.For Series 1 and 2, 2.0L Diesel, Series 2-3 2.25L Gas or Diesel.Typically 8 Required. Each Requires Half-Nut BN-NT605061L.

Tappet Adjusting Screw Inlet.For Series 1 1.6L and 2.0L, 1948-58.Requires Lock Nut BN-2842, (These are BSF Thread).Land Rover Genuine. NOS. Superse...

Tappet Adjusting Screw Exhaust with Cap.For Series 1 1.6L and 2.0L, 1948-58.Includes Cap EP-212160 and Circlip EP-212161.Requires Lock Nut BN-2842,...

Nut Hex 5/16" BSF Narrow Various Uses.For Series 1 1.6L and 2.0L Tappet Adjuster Screws, EP-506812 and EP-506818.

Reproduction Lucas Switch for Ignition and Headlamp.For Series 1-2a 1954 to April 1966.Note: Key Cylinder and Knob Sold Separately, see BE-395141 a...

Lucas 31788 OEM Switch for Side and Head Lights or Smiths Heater Fan Switch. For Series 2a-3, 1967-84. For Earlier Series Ignition / Headlamp Switc...

Steady Post for 11" Brake Back Plate.Comes with Lock Nut and Bushing/Cap.For Series 1-3 109" Front. Series 3 88" Front from 1980.

Gasket for Oil Tube on Side of the Block.For Series 2-3 2.25L Gas or Diesel; Defender 2.5L Naturally Aspirated Diesel,,2.5L Turbo Diesel, 200TDi an...

Oil Seal for Steering Relay Series 1-3.2 Typically Required, one at the top, one at the bottom.If you are taking your Steering Relay apart, Be Very...

Capping Bottom Corner for Seat Cushions OEM.For Series 2-3 and Defender Standard Seat Cushions.

Brake Shoes Axle Set 11" Rear, OEM Ferodo.Rear Series 1 107" with 11" Brakes, All Rear Series 1-3 109", Rear Defender 110/130" up to 1993, 6 Cylind...

Door bottom assembly, front right Series 3 1972-84. Non-anti-Burst. No capping. For Series 3 non-anti-Burst Handles, no keyhole. Aluminium over ste...

Castrol GTX Classic 20W50 Conventional Engine Oil 1 Litre Jug.For Series 1 to 3, 1.6L, 2.0L, 2.25L, 2.6L Gas and Diesel Engines.Castrol® GTX® Class...

This is your oil change in a box! This 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, an aftermarket oil filter, copper sump sea...

This is your oil change in a box! This 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, a Land Rover Genuine oil filter, copper su...

This is your oil change in a box! This Premium 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, 1 litre of Castrol Classic EP90 AP...

This is your oil change in a box! This 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, the longer style oil filter (RTC3185), cop...

This is your oil change in a box! This 3 Brothers kit includes 10 litres of Castrol 20W50 High Zinc Oil - 7 litres for your standard oil change an...

This is your oil change in a box! This premium 3 Brothers kit includes 10 litres of Castrol 20W50 High Zinc Oil - 7 litres for your standard oil c...

This is your oil change in a box! This 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, the shorter style oil filter (RTC3184), co...

PAIR of Front Vent Foam Rubber Seal for Series 3 1971-84 and Defender.Land Rover Genuine.Note that this is a foam rubber, (closed cell), seal with ...

Radiator Only for 300Tdi.For Defender, Discovery 1 and Range Rover Classic.For the Copper Core Version of this, see EC-BTP2275CC. For the Complete ...

Radiator Only for 300Tdi Heavy Duty All Metal Copper Core with Brass Ends.For Defender, Discovery 1 and Range Rover Classic.For the Less Expensive ...

Clamp for Steering Drag Link or Track Rod or Longitudinal Rod

Glass for Rear Safari Door Clear, 4mm, Unheated Series or Defender. Series 2-3 1958-84, Defender to 1A622423, (2001). Uses GW-333032/5K Retainer Ki...

This is your oil change in a box! This 3 Brothers kit includes 7 litres of Castrol 20W50 High Zinc Oil, the OEM shorter style oil filter (RTC3184)...

This is your oil change in a box! This premium 3 Brothers kit includes 10 litres of Castrol 20W50 High Zinc Oil - 7 litres for your standard oil c...

Mud Flap Rear Left Hand Black with White Heritage Logo.For Defender 90.Land Rover Genuine. Includes mounting bracket.Matching right side is MF-LR06...

Gasket for Oil Filter Housing to Block. Supersedes EG-ETC7582. Refer to EG-ERR3607, (oblong holes), as the possible alternative to this gasket (lin...

Spring for Timing Pawl Chain Tensioner Series 1 1.6L and 2.0L Gas Engine.

Ball for Oil Pump Release Valve on Series 1 1948-58 and 2.6L 6 Cylinder.

Circlip for Timing Chain Idler Wheel.For Series 1 1.6L, 2.0L 1948-58.Supersedes EP-09128 and EP-9128.

Circlip for Adjuster Arm to Pivot Pin Series 1 1.6L and 2.0L Gas Engine.Supersedes EP-09129 and EP-9129.

Copper Sealing Washer for Various Uses LR Genuine

Filler Plug Screw for Drive Member Early Series 2-2a.Note: This screw requires Copper Seal EP-232038 (linked below).

Radiator Coolant Hose Kit Top for Discovery 2 V8 Gas, 1999-2004.

Halogen Head Lamp, for Left Hand Drive. OEM Wipac. For Series 1-3, Defender, and Range Rover Classic. Sold Each. Halogen Bulb Not Included. See LB-...

Wipac HALOGEN Head Light Upgrade Kit, Designed for LHD Series 1-3, RRC, Defender.Pair of Replacement 7" Head Lamps Including 65 Watt high beam / 55...