Newest Products

Power Steering Hose Box to Reservoir. For Left Hand Drive Defender TD5 from 1999 to '06, from VIN: XA159807.

Power Steering Hose Pump to Box Discovery 2 V8

Power Steering Hose Box to Reservoir Discovery 2 V8

Power Steering Hose Pump to Steering Box. For Defender Left Hand Drive TD5 from 1999 to '06. For Left Hand Drive Defender with 4.0L EFI V8 from 199...

Joint Gasket for Lower Swivel Pin. Fits Defender, Discovery 1 and Range Rover Classic. Supersedes SC-FRC2897.

Shim for Top Swivel Pin 0.003", (0.075mm). For Defender All With or Without ABS, Discovery 1, and Range Rover Classic with ABS from June 1985. For ...

Shim for Top Swivel Pin 0.005", (0.130mm). For Defender All With or Without ABS, Discovery 1, and Range Rover Classic with ABS from June 1985. For ...

Shim for Top Swivel Pin 0.010", (0.250mm). For Defender All With or Without ABS, Discovery 1, and Range Rover Classic with ABS from June 1985. For ...

Shim for Top Swivel Pin 0.030", (0.750mm). For Defender All With or Without ABS, Discovery 1, and Range Rover Classic with ABS from June 1985. For ...

Top Swivel Pin Shim Kit 0.003-0.030", Set of 8 Shims. For Defender All With or Without ABS, Discovery 1, and Range Rover Classic with ABS from June...

Swivel Pin Housing Assembly Left Hand Series 2a to 3, 1964-84. Uses 71/6" Studs. AKA: SC-531004.  

Swivel Pin Housing Assembly Right Hand Series 2a to 3, 1964-84. Land Rover Genuine. With 71/6" Studs. AKA: SC-FRC2074, SC-531005.

Thrust Washer for Top Swivel Pin. For Defender up to 1993 to VIN: KA930455. For the Earlier Series version, see SC-528702.

Thrust Washer for Top Swivel Pin. For Defender up to 1993 to VIN: KA930455. For the Earlier Series version, see SC-528702.

Shock Absorber for Series 1 80" Front or Rear, 1948-53. Extended Length is 20.5", compressed length 13.3". Supersedes SS-241038.

Lucas 6-Way Wiring Junction Box. For Series 1 and 2, 1948 to 1961. Supersedes BE-LU78266, BE-LU76266.

Red and Black Sockets with Plug for Inspection Lamp or other accessory on Dash. For Series 1-2a.

Repair Kit for Smiths Jaeger 4" Instrument Gauge, (Speedometer or Fuel/Temp/Charge Cluster). Kit includes the 4" Diameter Glass, Black Bezel, Inner...

Relay Grey 70Amp for ABS or Glow Plug, 4-Pin. Suitable for TD5, LR3, LR4, RR-Full 03-12, RRS 06-13

Hella Relay Grey 70Amp for ABS or Glow Plug, 4-Pin. Suitable for TD5, LR3, LR4, RR-Full 03-12, RRS 06-13.

Rubber Pad between Radiator Grill and Chassis for Series 1-3, Package of 3.

Pair of Brackets for the Front Wings to Bulkhead. Series 2-2a, 1958-71. Includes Right-Hand BP-338652, and Left-Hand BP-338653. Hot-Dip Galvanized....

Rear Lamp Cover Panel Right Hand Series 2 to 3 (Not the later North American Standard with the square reverse lamps). Supersedes BP-330204. Made in...

Rear Lamp Cover Panel Left Hand Series 2 to 3 (Not the later North American Standard with the square reverse lamps). Supercedes BP-330205. Made in ...

Galvanized Brackets Right Hand and Left Hand for Wings to Bulkhead. Fits Series 3, 1972-84.

Lower Dash Finisher for Right Hand Drive Defender. Supersedes BP-MTC6166.

Bolt and Nipple Retainer Kit for Defender Bonnet Catch. From 1995. OEM. Made in the UK. For the Complete Bonnet Catch Assembly, see BP-STC925.

Gasket for Clutch Withdrawal Housing. Series 2a, 1962 Gearbox Suffix B on to 1971. For the earlier gasket, See EG-213663. For the later Series 3 Ga...

Nutsert M6 for Defender Mud Flaps to Chassis and Various Other Uses.

Layshaft for Gearbox Suffix B and C. Series 2a, September 1962 to January 1965. OEM. SPECIAL ORDER: Please note this item is special order and ther...

Layshaft Cluster for Series 3 Gearbox Suffix B Only. SPECIAL ORDER: Please note this item is special order and there will be a substantial passage ...

Layshaft Cluster for Series 3 Gearbox Suffix B Only. SPECIAL ORDER: Please note this item is special order and there will be a substantial passage ...

Layshaft for Gearbox Suffix A, (or No Suffix Letter on Early Gearbox). Series 1 to 2a, 1948 to September 1962. SPECIAL ORDER: Please note this item...

Gasket for Clamp on Stator Tube in Steering Box. Series 1, 80", 86" and 107", 1948-55. Number 42 in the diagram.

If your fuel cooler starts leaking on your Td5 Defender (or imported Discovery) this kit can be an economical fix may save you from replacing the e...

Adapter Kit for 3-Bolt to 2-Bolt Series 1 Brake Master 86/88/107" with 10" Brakes. Use the later 2-Bolt Master Cylinder BB-520849 for this kit.

Bonnet Fastener Hook Kit Pair Including Bonnet Catches. For Series and Military. Quality Aftermarket Re-Production Set. Zinc Plated Hooks with Zinc...

Decal for Oil Filler Cap and Breathers. For 2.25L Series 2-3.

Seat Base Rubber Buffers for Series 1 86/107". Package of 6 with Screws. Fits the rear of the Seat base where the wood frame pegs go through the ba...

Check Rod for RH Middle Door Series 2-3 109" Station Wagon. Sometimes referred to as a "limit arm" or "door stay". Requires Bolt 1x BN-BH604121L, 2...

Retainer for Rear Safari Door Glass Lower. For Series 2-3 and Defender 1958-2001. For a Complete Kit of all Retainers, see GW-333032/5K.

Retainer for Rear Safari Door Glass Vertical Left or Right-Hand Side. For Series 2-3 and Defender 1958-2001. For a Complete Kit of all Retainers, s...

Retainer for Rear Safari Door Glass Upper. For Series 2-3 and Defender 1958-2001. For a Complete Kit of all Retainers, see GW-333032/5K.

Retainer for Rear Safari Door Glass Upper Left or Right Hand Corner. For Series 2-3 and Defender 1958-2001. For a Complete Kit of all Retainers, se...

Lock Nut for Rocker Tappet Adjuster Screw. 200Tdi and 300Tdi, Defender, Discovery 1, RRC.

Tappet Adjustment Screw on Rocker, 300Tdi OEM. For Defender, Discovery 1 and RRC. Requires Lock Nut EP-ERR560.

Oil Seal for Front of Camshaft.</p><p>300Tdi Defender, Discovery 1, and Range Rover Classic.

Oil Seal for Front of Camshaft, OEM, Corteco. 300Tdi Defender, Discovery 1, Range Rover Classic.