Newest Products

Shim for Pinion Bearing Flange-End 0.010" Early Land Rover Differential.

Front Cover Oil Seal for Crank 2.5NA, 2.5TD, 200Tdi Corteco

Gasket Fiber Water Branch to Cylinder Head. For Series 1 1.6L and 2.0L.

Round Retaining Plate with 3 Holes for Speedometer Cable. For Series 1 to 2a, (1950-1971). Fits on Speedometer Cable EP-RTC3484, holding it to the ...

Wading Plug for Flywheel Housing all 4 Cylinders to 1998. Also used on the Timing Cover for Tdi Engines. Defender, Discovery 1, Range Rover Classic...

Front Mud Flaps Only, (no Brackets), Plain, Pair. For Defender 90, 110, 130. 1983-2006. For Galvanized Brackets to go with this, see MF-DA1188.

Viscous Fan Coupling Double-End Wrench 32mm/36mm

Headliner Kit for Defender 110. Fits all 110's from 1987-2016 with alpine windows. SPECIAL ORDER: Please note this item is special order and there ...

Outer Pinion Bearing Front or Rear Differential Fits: Defender (rear Land Rover type differential) to 2006 from VIN: 2A626835Defender 110 & 130...

Railko Bushing for Upper Swivel Hsg Pin D1, RRC w/ABS

Single Rubber Buffer (Puck) for Spare Wheel on Bonnet S1-3.

Track Rod Tube Assembly with Ball Joints Defender 90/110

Oil Drain Pipe Assembly Turbo to Block 300Tdi OEM. Made in Turkey

Exhaust Front Pipe for TD5 No Catalytic Converter. For Defender to VIN:2A622423, (2002), and Early Discovery 2 with the TD5. Supersedes SE-WCD10586...

Tie Bar for Spare Wheel Retainer in Rear Tub Defender from 1989, OEM. Specific for Steel Wheel Spare. This is Metric threaded M16. For the Nut used...

Spacer for Interior Spare Tire Mount Defender 1989 onwards.

Headlamp Bulb 12V Military Series/Defender and Range Rover Classic to 1985. Asymmetric Type of Bulb.

Crankshaft Oil Seal for Defender 2007 on 2.2L & 2.4L

Exhaust Hanger Bracket 86/88/107/109" Various Uses

2 Way Brake Pipe Connector. Fits Defender, Discovery 1, LR3, Range Rover P38 and Range Rover Sport

Engine Mounting Bracket Left Hand 2.0L and 2.25L Diesel 1956 to 1967. Mounts to the Engine Block. For the Right Hand bracket see EM-271975. For the...

Spring Front 107/109" Station Wagon, Regular and Truck Cab For Series 1-3, 109" Gas 4, 6 and 8 Cylinder. Series 2-3 88" Diesel. Also Series 1 107" ...

Spring Rear 109" Station Wagon, Regular and Truck Cab Series 2-3 1958-84 10-Leaf Standard Weight Capacity. Left or Right Hand for a LHD. Right Hand...

Set of 4 Wheel Arches for Series 2-3 88" 1958-84. Fits Series 2 to 3, 88", Short Wheel Base Only. Includes Arch Spats.

The world’s first LED interior lamp replacement designed specifically for the Land Rover Defender. Plug & Play connection. Fixings are supplied...

Copper Seal for Radiator Drain Plug or Drain Tap and 2.25L Engine Block Drain Plug or Drain Tap.</p>For Series 1-3.

All Wheel Trim Canvas Top 88" 3/4 Hood Plain Sand. No Side Windows, but it comes with 1 Rear Window, 35-1/2” x 13-1/2”, which Rolls Up.

Rubber Seal for Brake or Clutch Reservoir Cap. For Cap number BB-SJL500030, (aka: BB-500201). Supersedes BB-260820.

Instrument Panel Facia Defender Right Hand Drive from 1983 to '98, (up to VIN: WA159806), Plastic. For Later see BE-YAF100080. For the Steel Versio...

Philips Fillister Head Screw M6 x 40mm Zinc Various Uses. Defender Interior Side Panels.

Plate on Inside of Rear Bulkhead for Spare Wheel Mount OEM. Supersedes BP-KTP500010 and BP-MUC6332. For the Spare Tire Mounting Kit, see BP-MXC5477...

Series 2, 2a and 3 Headlamp Relay Upgrade Kit. Series 2, 2a and 3 Supplementary Kit which independently fuses Headlamps, provides power via Relays ...

12V LED Flasher Unit Manual Adjustable. LED and Standard Bulb Mix Capable.

Repair Kit for SU Electric Fuel Pump (Pre-1985). For Series 1 Original SU Fuel Pumps.

Plastic Channel Filler Strip Kit Front RH Door Defender 1986 onwards.

Plastic Channel Filler Strip Kit Front LH Door Defender 1986 on

Parabolic Springs PAIR 3 Leaf Rear with U-Bolts and Nuts. For Short Wheel Base 86", 88", or Long Wheel Base, 107", 109". Series 1-3. Note: For Heav...

Parabolic springs PAIR 4-leaf rear long wheelbase with u-bolts and nuts. Series 1-3, 109" station wagon, and for heavier duty 109" regular and truc...

Rubber Neoprene Foam Seal Gasket for Steering Column. Series 1 to 2a, 1954-71. Supersedes SC-303995. Quality Made from Neoprene Foam Rubber. Made i...

Muffler and Tail Pipe Right Exit for SWB 88" and LWB 109" Regular. Fits: Series 1 SWB 86" and LWB 107" 1954-1958. Gas or Diesel. Series 2, 2A and 3...

Locker Plate for Flywheel. For Series 1 1.6L and 2.0L, 3 are Required, 1948-58. For Series 2 to 3, 2.25L 3 Bearing and 2.6L, 3 are Required, 1958-8...

Special Set Bolt for Flywheel to Crank 2.25L 3-Bearing Engines and the 2.6L, Series 2-3.8 Typically Required. For the Locker Plates, see CC-534098.

Door Top Glazed Dual Sliding Glass Right Hand. Fits Early Defender 110 to 1986, Defender 110 Wolf, Defender NAS Soft Tops, and Series 2 to 3, (as a...

Door Top Glazed Dual Sliding Glass Left Hand. Fits Early Defender 110 to 1986, Defender 110 Wolf, Defender NAS Soft Tops, and Series 2 to 3, (as an...

Sliding Perspex Window for Door Top Series 1 1954-58.This is a replacement window made from 5mm Perspex. It does not have the aluminium frame aroun...

Dynamat Extreme Sound Deadening Kit for the Defender TD5 Bonnet

Dynamat Extreme Sound Deadening Kit Defender Footwells. Fits Defender 90/110 from 1983 - 2006.

Brake Rotor Rear Solid Defender 110/130 from XA159807('99on). This is for both ABS and Non-ABS 110 Rear. Use Brake Pad Fitting Kit BB-DA4105 up to ...