Series 1 Engine

Inlet Valve for 2.0L and 2.25L Diesel Series 1-3 For Exhaust Valve see EP-STC1127 (linked below). Supersedes EP-247568 and EP-527240.  

Lock Nut for Connecting Rod.Fits 2.0L Diesel, 2.25L Gas or Diesel, 2.5L Gas or Naturally Aspirated Diesel, or 2.5L Turbo Diesel.OEM. Made in the UK.

Mud Excluder for Front Crank Oil Seal Fits 2.25L Gas or Diesel, and 2.5L Gas. After drilling out the original rivets that hold the Mud Shield in pl...

Nut 2BA Thread for Accelerator Rod Ball Joints and Various Other Uses.Supersedes FS-2247 and FS-3823.Note: You are purchasing 1, not 10 as shown in...

Valve Seal Inlet Guide (O-Ring) 2.25L Gas up to March 1968, Engine Suff K Also on 2.0/2.25L Diesels up to 1968. Land Rover Genuine

Lock Washer for Starting Dog on Crank Series 1-3 1948-84 For 3 Bearing Engines

Core Plug 1" Threaded for 2.0L & 2.25L Engines.For Series 1 to 3. 2 Required for Series 1 1.6L and 2.0L, Series 2-3 2.25L 3-Bearing. Series 3 m...

Bell Housing to Transmission Gasket S1-3, 48-84

Water Pump for Series 1 Gas 1.6L or 2.0L Engines,1948-1958.

Gasket Fiber Water Branch to Cylinder Head. For Series 1 1.6L and 2.0L.

Solex 32PBI-2 Carburetor Rebuild Kit w/Acc Dia.1.6/2.0L S-1. Includes Throttle Spindle and Butterfly   

WE CAN NOT SHIP PAINT OUTSIDE OF CANADA Paintman Paints Engine Grey Land Rover Series 1 2.0L Gas, 1952 to 1958. 500ml Can. More than enough to do a...

Locker Plate for Engine Mounts.</p><p>Series 1 and  2, 2.0L and 2.25L 1958-61. Land Rover Genuine.

Stud for Inspection Cover on Flywheel Housing Series 1-3 1956-84.

Cork Packing Seals for Rear Main Bearing.For Series 1 1948-55 1.6L and 2.0L.Note: 2 Required.For the later 2.0L engine, see EG-524636PR (linked bel...

Valve Collet Split Cone Retainers Keepers, (Pair).For 1.6L and 2.0L, Series 1 1948-58.Land Rover Genuine New Old Stock.One Pair Required per Valve,...

Gasket Paper for Water Pump.For Series 1 1.6L and 2.0L 1948-58.

Copper Washer Crush for Oil Sump Drain and Various.For 200Tdi Defender, Discovery 1 and RRC. Alternative is the Solid Copper Seal, see CS-ETC7398.F...

Stud for Timing Cover.For Series 1 and 2, 2.0L Diesel 1956-62.For Series 2, 2.25L Gas to 1961.1-Required. This is the Longer Stud. 5/16" UNF x 4-1/4".

Gasket Paper for Timing Cover 1.6L & 2.0L 1948-58

Head Gasket for Series 1 2.0L 1955-58 (Spreadbore Head). For a Complete Top-End Gasket Set, see EG-269365 (linked below).

Land Rover Genuine Gasket for Oil Filter Housing to Block.Series 1 2.0L (Filter Housing to Adapter), Series 2-3, 2.25L and 2.6L.Defender 2.5TD and ...

Rubber Seal for Sump to Flywheel Housing.For Series 1 1.6L and 2.0L, 1948-58.Land Rover Genuine.

Gasket Fiber Inlet Manifold to Block for 1.6L and 2.0L Series 1, 1948-58.

Castrol GTX Classic 20W50 Conventional Engine Oil 1 Litre Jug.For Series 1 to 3, 1.6L, 2.0L, 2.25L, 2.6L Gas and Diesel Engines.Castrol® GTX® Class...

Steel Ball for Oil Pump Relief Valve.For Series 1 2.0L Diesel and Series 2-3 2.25L Gas or Diesel.

Locker Plate for Oil Feed Bolt to Distributor.For Series 1 1.6L and 2.0L, and Series 2a 2.6L 6 Cylinder.

Locker Plate for Cam Shaft Bearings.For Series 1 1.6L and 2.0L, 1948-58.Typically 4 Required to Fix the Camshaft Bearings to the Cylinder Head.New ...

Bushing for Idler Gear in Oil Pump Series 1 1.6L and 2.0L, 1948-58.aka: EP-9049.

Gasket Cork for Rear Camshaft Cover.For Series 1 1.6L and 2.0L 1948-58.

Special Bolt to hold Breather Cap on Rocker Cover.For Series 1-3 1956-84.

Exhaust Valve for 2.0L and 2.25L Diesel Series 1-3 For Inlet Valve see EP-ERC6795 (linked below). Supersedes EP-247569, EP-513481, and EP-ERC6794.

Spring for Timing Rachet, OEMFor Series 1-3, 2.0L Diesel and 2.25L Gas or Diesel.

Ball Joint Assembly for 2BA Threaded Accelerator Rods Series1-3, and Defender V8 Requires FS-RTC608 2BA Nut for Locking in Position (linked below) ...

Washer Flat Valve Cover Dome Nut S2-3 2.25L & Diesel Lines OEM

Heater/Glow Plug for 2.0L & 2.25L Diesel Engine Series 1-3, 1956-84, 3 and 5 main Bearing up to Engine Serial Number 36623971B. For a Kit that ...

Breather Cap on Rocker Cover 2.0/2.25L Gas Series 1-3. With Label. No Emissions Pipe. Fitted to Engines up to Prefix 901 & 904 Suff B. For Ser...

Breather Cap on Non-Vented Filler Tube 2.0L/2.25L Series 1-3 with Label.For Non-Ventilated Oil Filler Pipes. Series 1 Engine 26100201, (1952), onwa...

Ring Gear for Flywheel Series 1, 2.0L (1955-58 Spreadbore) Series 2, 2a, and 3, 2.25L and 2.6L Gas

Timing Chain Wheel for CamshaftSeries 2-3, 2.0L Diesel, 2.25L Gas or Deisel, 2.6L 6 Cylinder Gas.Requires Key EP-9210.

Joint Gasket for Throttle Chamber of Solex 32PBI-2 Carburetor. For Series 1 1.6L and 2.0L. New old Stock. For a full Carburetor Gasket Set, see EF-...

Joint Gasket for Accelerator Pump on Solex 32PBI-2 Carburetor. Series 1. New Old Stock. For a full Carburetor Gasket Set, see EF-274895.

Decal for Oil Filler Cap and Breathers. For 2.25L Series 2-3.

Spring for Timing Tensioner. For Series 1-2 2.0L Diesel and Series 2-3 2.25L Gas and Diesel.

WE CAN NOT SHIP PAINT OUTSIDE OF CANADA Paintman Paints Engine Blue Land Rover Series 1 Gas 1948 to 1951. 400ml Aerosol Can. You may need 2 cans to...

Bushing for Oil Pump Drive Shaft Series 1 1951-58, and 2.6L 6 Cylinder.

Oil Pump Driver Gear for Series 1 1.6/2.0L Engines.

Bushing for Distributor Housing Series 1 1.6L/2.0L 1948-58. Old Packing Grease Included...