Series 1 Steering

Steering Box Repair Kit for Series 1-3, 1956-84Quality Kit Made in the UK.This Kit Includes;2x SC-271384 Bearing Race, 1xSC-271013 O-Ring,20x SC-BL...

Swivel Hub Oil Seal, The large seal for the front swivel balls.For Series 1-3, 1948-1984.For a Kit with the Seal Retainer and Correct Bolts and Nut...

Tie Rod End for Steering Track Rod, Drag Link or Longitudinal Tube.Left Hand Thread, Series 1-3 1948-July 74, Unthreaded Shoulder.See 2nd Photo for...

Tie Rod End for Steering Track Rod, Drag Link or Longitudinal Tube.Right Hand Thread, Series 1-3 1948-July 74, Unthreaded Shoulder.See 2nd Photo fo...

Tie Rod End, Set of 4.2x Right and 2x Left Hand, with Steering Rod Clamp Kits.For Series 1-3 1948-July 74, Unthreaded Shoulders.

Steering Relay Assembly, Series 1-3For a Kit of the Relay to Chassis Bolts, see SC-SRELBNKIT.

Bolt Kit Axle Set, for SC-DA3169 or SC-DA3181 Swivel Ball Housing Kits.Includes all Fasteners required for the Seal Retainer to the Swivel Hub, Fro...

Standard Swivel Hub Oil Seal Rebuilder's KitFits Series 1 86/88, 107/109 1954-1975,Series 2 88/109 1958-1960,Series 2a 88/109 1961-1971,Series 3 88...

Swivel Pin Bearing - Bottom of Swivel Housing. Series1-3.

Oil Seal for Steering Relay Series 1-3.2 Typically Required, one at the top, one at the bottom.If you are taking your Steering Relay apart, Be Very...

Flange Plate for Steering Relay Mount to Chassis.For Series 1 to 3, 1948-84.For the required BSF Bolts see BN-250693 (linked bottom left). For the ...

Bolt Kit for Swivel Ball Flange to Axle.This is an Axle Set; does both Left and Right Sides.Series 1-3, 1948-84.

Bolt Kit for Seal Retainer to Swivel Hub.This is an Axle Set; does both Left and Right Hand Sides.Series 1 to 3, 1948-84.

Track Rod End Set for Longitudinal Tube 1948-07/74 w/Clamps

Ultimate Swivel Hub Oil Seal Rebuilder's Kit, Fits Series 1 86/88, 107/109 1954-1975, Series 2 88/109 1958-1960, Series 2a 88/109 1961-1971. Series...

Premium Swivel Hub Oil Seal Rebuilder's Kit, Fits Series 1 86/88, 107/109 1954-1975, Series 2 88/109 1958-1960, Series 2a 88/109 1961-1971. Series ...

Nut 1/4" BSF for Various Uses.For the Swivel Lockstop Bott, Yellow 4WD Knob, 4WD Clevis Assembly, Transfer Case Bottom Cover, Series 1 2.0L Intake ...

Steering Box Gasket Paper 0.005 for Series 1-3 1948-84.Used with Shims SC-261858 on 1956 to 84 Steering Column to Box and End of Box.Supersedes SC-...

Swivel Hub Seal Retainer 1948 to 1984, Series 1-3.For a Kit with the Seals and Correct Bolts and Nuts, see SC-SOSKITST.

Bolt Kit for Front Stub Axle to Swivel Hub.This is an Axle Set; does both Left and Right Hand Sides.For Series 1-3, 1948-84.

Steel Shim 0.005" for Steering Box Series 1-3 1956-84See SC-271379 for Mylar 0.002" Shim.See SC-261857 for Paper Gasket 0.005".

Swivel Housing Gaitor Kit Rubber Series 1-3 Front AxleFor the Original Style Leather Gaitor, see SC-276954.

Swivel Housing (Ball) for Series 1 to 3, 80/86/88/107/109" Chrome.

Rubber Strip for around the Steering Column where the Clamp tightens down.For Series 1-3.

Tie Rod End, Set of 6. 3x Right and 3x Left Hand, with Steering Rod Clamp Kits. For Series 1-3 1948-July 74, Unthreaded Shoulders.   Does the Track...

Series 1, 2, and 2a Swivel Pin Railko Conversion Kit, Full Axle Set.Does Both Swivels.For Converting older style Swivel Pin Housing Units to King P...

Gasket for Clamp on Stator Tube in Steering Box. Series 1, 80", 86" and 107", 1948-55. Number 42 in the diagram.

Stud 3/8" BSF for Steering Lever on Top of Swivel Housing, (Pendant Type).For Series 1-2a 1950 to February 1962, 1 Required per Side, (2 per Axle)....

Stud 3/8" BSF for Steering Lever on Top of Swivel Housing, (Pendant Type).For Series 1-2a 1950 to February 1962, 3 Required per Side, (6 per Axle)....

Thrust Washer for Steering Relay.For Series 1-3, (2 Typically Required).Note: You are Purchasing 1, not 10 as shown in photo.

Swivel Hub Lock Stop Plate Series All

Steel Ball for 2.25L Timing Tensioner and Series 1 Steering Column to 1954.1 Required for 2.25L Tensioner, 18 required for early Series 1 Steering ...

Set Bolt 1/4" BSF x 13/32" Black Hex Cap. OEMFor Series 2a-3 Reverse Stop Gate, Series 1 Steering Relay, and Swivel Pin.

Oil Level Plug for Swivel Housing,For Defender, RRC, and Discovery 1.Also used on Series 1 Transfer Case, 1948-58, aka: part number 3289.

Steering Box Shim Mylar 0.002" for Series 1-3 1956-83Also for RRC Manual Steering Box.See SC-261858 for Steel 0.005" Shim.

Swivel Housing Kit No Swivel BallFor Series 1-2a 1950-67Does One Side, Left-Hand Or Right-Hand.Includes Parts to Complete a Railko Conversion to la...