Series 1 Suspension

Nylon Lock Nut for Shackle Pins 9/16" UNF

Spring Bushing (Front or Rear), or Rear Chassis Bushing.Series 1-3, Front Springs: 1952-84. Rear Springs: 1954-84. Rear Chassis: 1954-84.Supersedes...

Front Chassis Bushing for the Rear of the Front Spring. This goes through the Chassis Rail for the Front Spring's rear shackle assembly.For Series ...

Front Spring Shackle Plate Plain (1956-1984) 88"/109"

Shock Absorber Kit 86/88" Standard Pro Oil Front and Rear.With Bolts, Nuts, Fasteners. Everything Needed to Install.

Shackle Bolt for Rear of Rear Spring - 9/16 UNF 88/107/109

Axle U-Bolt Rear with NutsFor Series 1-3 86/88, 107/109 to end of 2a, Rover Axle4 Required.

Axle U-Bolt "Short" Front Series 1-3 86/88" with Nuts For Front 9-Leaf Springs. 3 Required. For Longer U-Bolt, (1 required), see SS-562641.

Front and Rear Shackles Kit.For 86" and 88" Series 1-3, 1956-84.Shackles, Bolts and Nuts for mounting Front and Rear Springs.

Shock Absorber 107 and 109 Heavy-Duty Front with Bushings

Rear Suspension Shackles Kit.For 86" and 88" Series 1-3, 1956-84.Shackles, Bolts and Nuts for mounting Rear Springs.

Shock Absorber - Series 2-3 109" Standard Rear. Includes Bushings

Cotter Pin for Bottom of Shock Absorbers and Other UsesSeries 2-3 OEMAlso used for holding the rear Tailgate hinge in place.

U-Bolt Set Front and Rear for Series 1-2a 107" and 109" with Lock Nuts.

U-Bolt Set for Front and Rear Leaf Springs, with Lock Nuts.For Series 1-3 86/88", 1954-84.

Rear Spring Shackle Threaded 9/16" UNF.Inner Shackle for for Series 1-3, 88" and 107".

Shock Absorber Front Standard Duty For Series 1-3, 107" and 109" Includes Required Bushings

Bolt 7/16" UNF x 6 1/2" for Shock Absorber Top, OEM.For Series 1-3 Front or Rear 86" and 88".For Series 1-3 Front 107" and 109".Requires Nut BN-NY6...

Spring or Chassis Bushing for Series 1 80" Narrow Springs.Front Springs: 1948-51. Rear Springs: 1948-53. Front Chassis: 1948-50. Rear Chassis: 1948...

Shock Absorber For Series 1-3, 86" and 88" Standard Rear.,Includes Bushings.

Shock Absorber Front 86/88" Heavy-Duty or Front 107/109" Standard Duty, w/Bushings.For Series 1-3.

Axle U-Bolt "Long" Front Series 1-3 86/88" with Nuts For Front 9-Leaf Springs up to Axle Suff C, (1979). 1 Required. For Shorter U-Bolts, (3 requir...

Spring Rear Standard 86/88" Series 1-3 1954-84 11-Leaf Standard. Used as Left Hand or Right Hand on a LHD 88". This is a Standard Weight Spring, fo...

Shock Absorber Rear Series 1-3, 86" and 88" Rear Heavy-Duty, for Heavier Loaded Vehicles. Series 1 107" and 109" Rear Standard Duty Includes Requir...

Washer Flat for Sway Bar Link and Bottom of Shock. OEM.Note: You are purchasing 1 not 10 as shown in photo.

Series 1-3 86/88" Extended w/BushingsPerfect for Parabolic Springs!Uses a Cellular Foam insert instead of Nitrogen Gas or Air. Allows for 50% more ...

Shock Absorber -Front 86/88 Std PR2 w/Bushings Series 1-3

Shock Absorber -Rear 86/88 Std PR2 w/Bushings Series 1-3

Front Suspension Shackles Kit.For 86" and 88" Series 1-3, 1956-84.Shackles, Bolts and Nuts for mounting Front Springs.

Leaf Spring Kit for Series 1-3 86/88" LHD Standard with U-Bolts. Standard Duty Set of Leaf Springs and U-Bolts.

Shock Absorber for Series 1 80" Front or Rear, 1948-53. Extended Length is 20.5", compressed length 13.3". Supersedes SS-241038.

Axle U-Bolt Front "Short" with Lock Nuts.For Series 1-2a, , 107" and 109" 4 and 6 Cylinder Gas.Also for Series 2a 88" and 109" Diesels.Typically fo...

Axle U-Bolt Front "Long" with Lock Nuts.For Series 2/2a 109" 4 and 6 Cylinder Gas.Also for 88" and 109" Diesel.Typically for 11-Leaf Springs.1 Requ...

Spring Rear Series 1-3 86/88" LHD 11-Leaf 1954-84 Light Duty.For Lighter Loads and a Softer Ride.

Locker Plate for Spring U-Bolts (For 2.5" Narrow Springs).For Series 1 to 2a, 1952-64 with the Early Narrow 2.5" Wide Leaf Springs.New Old Stock - ...

Shock Absorber Kit Standard Oil-Filled Allmakes Pro For Series 1 through 3, 86" and 88", 1954 to 84.For a Kit with new Bolts, Nuts, Washers and Cot...