Skip to content

Series 2 2a 3 Engine

All our parts in relation to engines in the Land Rover Series 2, 2a, and 3.

Filters

  • $25.70 - $25.70
    $25.70
    $25.70 - $25.70
    $25.70

    Pipe Adapter for Emission Hose on Carb Adapter Series 2a/3

    Pipe Adapter for Emission Hose on Carburetor Adapter or Inlet ManifoldFor Late Series 2a and Series 3.You might need the Copper Seal, see CS-243958...

    View full details
    $25.70 - $25.70
    $25.70
    $25.70 - $25.70
    $25.70
  • $18.52 - $18.52
    $18.52
    $18.52 - $18.52
    $18.52

    Idler Wheel for Timing Chain 2.0L Dsl, 2.25L G/D

    Idler Wheel for Timing Chain.For Series 1-3, 2.0L Diesel, 2.25L Gas and Diesel.

    $18.52 - $18.52
    $18.52
    $18.52 - $18.52
    $18.52
  • $82.14 - $82.14
    $82.14
    $82.14 - $82.14
    $82.14

    Connecting Rod Assembly 2.25L Gas Ser 2 1958-61 NOS

    Connecting Rod Assembly 2.25L Gas Series 2 1958-61Note: This is Specifically for the Series 2, 1958-61, Gas Engine. Serial Numbers 151XXXXXX.These ...

    View full details
    $82.14 - $82.14
    $82.14
    $82.14 - $82.14
    $82.14
  • $4.08 - $4.08
    $4.08
    $4.08 - $4.08
    $4.08

    Bolt for Breather on Rocker Cover Series 1-3 1956-84

    Special Bolt to hold Breather Cap on Rocker Cover.For Series 1-3 1956-84.

    $4.08 - $4.08
    $4.08
    $4.08 - $4.08
    $4.08
  • $12.58 - $12.58
    $12.58
    $12.58 - $12.58
    $12.58

    Engine or Gearbox Mounting Rubber w/Nuts Series 2-3 Diesel

    Engine or Gearbox Mounting Rubber with Nuts for 2.25L Diesel Engine.Series 2-3 Diesel.Sometimes used as a stronger Engine Mount for Gas Engines and...

    View full details
    $12.58 - $12.58
    $12.58
    $12.58 - $12.58
    $12.58
  • $9.57 - $9.57
    $9.57
    $9.57 - $9.57
    $9.57

    Gearbox Mounting Rubber w/Nuts S2-3 1958-84 S1 Eng 54-58

    Gearbox Mounting Rubber with Nuts.Series 1 Engine Mounts from 1954 to 1958 and Series 2/2a/3 Gearbox Mounts from 1958 up through 1984.

    $9.57 - $9.57
    $9.57
    $9.57 - $9.57
    $9.57
  • $361.04 - $361.04
    $361.04
    $361.04 - $361.04
    $361.04

    Main Bearing Set .010 US 2.25L Gas 1958-61 and 2.0L Diesel

    Main Bearing Set .010 Under Size 2.25L Gas Series 2 1958-61 and Series 1-2, 2.0L Diesel.Note: These are NOS specific to the Series 2, 1958-61 2.25L...

    View full details
    $361.04 - $361.04
    $361.04
    $361.04 - $361.04
    $361.04
  • $6.01 - $6.01
    $6.01
    $6.01 - $6.01
    $6.01

    Bushing for Oil Pump Idler Gear Series 2-3 2.25L Gas

    Bushing for Oil Pump Idler Gear.For Series 2-3 1960-84.Note: Series 2, 1958-59 Engines Have a Different Idler Gear, see EP-237884.This Bushing is a...

    View full details
    $6.01 - $6.01
    $6.01
    $6.01 - $6.01
    $6.01
  • $3.43 - $3.43
    $3.43
    $3.43 - $3.43
    $3.43

    Valve Spring Cap Series 1 1950-58 & 2.6L 6Cyl

    Valve Spring Cap for Series 1 1.6L and 2.0L 1950-58 Inlet Valves, Exhaust Valves from Engines 06106720, and Series 2a 2.6L 6 Cylinder Exhaust Valves.

    $3.43 - $3.43
    $3.43
    $3.43 - $3.43
    $3.43
  • $9.32 - $9.32
    $9.32
    $9.32 - $9.32
    $9.32

    Control Rod for Governor Series 2a 1967on NOS

    Control Rod for Governor on Series 2a 2.25L Engine Suffix J (1967on).New Old Stock.

    $9.32 - $9.32
    $9.32
    $9.32 - $9.32
    $9.32
  • $10.65 - $10.65
    $10.65
    $10.65 - $10.65
    $10.65

    Inlet Rocker Arm Bushing All Diesel up to 1990 (Not Tdi)

    Inlet Rocker Arm Bushing All Diesel Engines upto 1990 (Not Tdi). Fits Series 1 to 3, 2.0L and 2.25L Diesel, Defender 2.5L Naturally Aspirated and 2...

    View full details
    $10.65 - $10.65
    $10.65
    $10.65 - $10.65
    $10.65
  • $10.65 - $10.65
    $10.65
    $10.65 - $10.65
    $10.65

    Exhaust Rocker Arm Bushing All Diesel upto 1990 (Not Tdi)

    Exhaust Rocker Arm Bushing All Diesel Engines upto 1990 (Not Tdi).Fits Series 1 to 3, 2.0L and 2.25L Diesel, Defender 2.5L Naturally Aspirated and ...

    View full details
    $10.65 - $10.65
    $10.65
    $10.65 - $10.65
    $10.65
  • $36.70 - $36.70
    $36.70
    $36.70 - $36.70
    $36.70

    6 Cylinder 2.6L Guide for Inlet Valves Not NADA NOS

    Valve Guide for Inlet Valves on 2.6L 6 Cylinder European Version. Not for Series 2a NADA 2.6L.Supersedes EP-504169.New Old Stock.

    $36.70 - $36.70
    $36.70
    $36.70 - $36.70
    $36.70
  • $1.40 - $1.40
    $1.40
    $1.40 - $1.40
    $1.40

    Cork Packing Seals for Rear Main Bearing Series 1 2.0L 2.6L

    Cork Packing Seals for Rear Main Bearing (Pair).For Series 1 2.0L 1955-58 and Series 2a 2.6L 6 Cylinder.Supersedes EG-7959, EG-265653, EG-267653 a...

    View full details
    $1.40 - $1.40
    $1.40
    $1.40 - $1.40
    $1.40
  • $3.99 - $3.99
    $3.99
    $3.99 - $3.99
    $3.99

    Sealing Washer Side Rocker Cover, Speedo Pinion & Various

    Sealing Washer O-Ring Side Rocker Cover for Series 1 2.0L 1954-58, Speedometer Pinion Sleeve Series 1-3 to 1984 and Series 2a 2.6L Water Pump. Mayb...

    View full details
    $3.99 - $3.99
    $3.99
    $3.99 - $3.99
    $3.99
  • $4.93 - $4.93
    $4.93
    $4.93 - $4.93
    $4.93

    Cork Gasket for Oil Filter Hsg to Block Series 1-3, Defender

    Original Cork Gasket for Oil Filter Housing to Block.Series 1 2.0L (Filter Housing to Adapter), Series 2-3, 2.25L and 2.6L.Defender 2.5TD and 200Td...

    View full details
    $4.93 - $4.93
    $4.93
    $4.93 - $4.93
    $4.93
  • $9.81 - $9.81
    $9.81
    $9.81 - $9.81
    $9.81

    Banjo Bolt for Oil Pipe to Cylinder Head 2.25L and Various

    OEM Banjo Bolt for Oil Pipe from Block to Cylinder Head and Various Uses.Series 1 1.6L and 2.0L, 1948-58, (1 Required).Series 2-3, 2.25L 1958-84, (...

    View full details
    $9.81 - $9.81
    $9.81
    $9.81 - $9.81
    $9.81
  • $1.63 - $1.63
    $1.63
    $1.63 - $1.63
    $1.63

    Copper Sealing Washer S1 Oil Banjo Bolts S2-3 Oil Press SU

    Copper Sealing Washer Crushable for Various Uses. OEM.For Series 1-3 Oil Banjo Bolts, Series 2-3 Oil Pressure Sending Unit, Discovery 1, Discovery ...

    View full details
    $1.63 - $1.63
    $1.63
    $1.63 - $1.63
    $1.63
  • $5.06 - $5.06
    $5.06
    $5.06 - $5.06
    $5.06

    Locker Plate for Oil Feed Bolt to Distributor 1.6L, 2.0L & 2.6

    Locker Plate for Oil Feed Bolt to Distributor.For Series 1 1.6L and 2.0L, and Series 2a 2.6L 6 Cylinder.

    $5.06 - $5.06
    $5.06
    $5.06 - $5.06
    $5.06
  • $3.82 - $3.82
    $3.82
    $3.82 - $3.82
    $3.82

    Steel Ball for Relief Valve on 2.0L Dsl and 2.25L G/D

    Steel Ball for Oil Pump Relief Valve.For Series 1 2.0L Diesel and Series 2-3 2.25L Gas or Diesel.

    $3.82 - $3.82
    $3.82
    $3.82 - $3.82
    $3.82
  • $8.57 - $8.57
    $8.57
    $8.57 - $8.57
    $8.57

    Lock Washer for Timing Chain Damper 2.0L/2.25L/2.6L Gas

    Lock Washer for Timing Chain Damper.For Series 1 2.0L, and Series 2-3 2.25L and 2.6L Gas.Two Typically Required.Supersedes EP-278769.

    $8.57 - $8.57
    $8.57
    $8.57 - $8.57
    $8.57
  • $75.04 - $75.04
    $75.04
    $75.04 - $75.04
    $75.04

    Oil Feed Pipe Block to Cylinder Head 2.25G/D, 2.5G/D 58-90

    Oil Feed Pipe Block to Cylinder Head OEM. For Series 2-3 2.25 Gas or Diesel, and Defender 2.5L Gas or Diesel. Requires 2x EP-597563 Banjo Bolts and...

    View full details
    $75.04 - $75.04
    $75.04
    $75.04 - $75.04
    $75.04
  • $6.84 - $6.84
    $6.84
    $6.84 - $6.84
    $6.84

    Tappet Adjuster Screw for Series 1-3, 2.0Dsl, 2.25L G/D

    Tappet Adjuster Screw.For Series 1 and 2, 2.0L Diesel, Series 2-3 2.25L Gas or Diesel.Typically 8 Required. Each Requires Half-Nut BN-NT605061L.

    $6.84 - $6.84
    $6.84
    $6.84 - $6.84
    $6.84
  • $19.79 - $19.79
    $19.79
    $19.79 - $19.79
    $19.79

    Castrol GTX Classic 20W50 High-Zinc Engine Oil (1L)

    Castrol GTX Classic 20W50 Conventional Engine Oil 1 Litre Jug.For Series 1 to 3, 1.6L, 2.0L, 2.25L, 2.6L Gas and Diesel Engines.Castrol® GTX® Class...

    View full details
    $19.79 - $19.79
    $19.79
    $19.79 - $19.79
    $19.79