Service & Hardware

OEM Service Kit for Td5 Oil, Air, Fuel and Rotor Filters, Washer. Defender or Discovery TD5, 1999 to 2006.

Bolt Hex Head 2BA x 3/8" for Thermo Switch on Cyl Head

Split Cotter Pin for Handbrake Rod to Catch and Various Uses.For Series 1-3.1/16" x 1".

Wing Nut UNF for Spare Wheel Retainer in Rear Tub

Wing Nut for Battery J-Clamp Rod, Air Cleaner Clamp 1/4" BSF Thread. OEM.Note: You are purchasing one, not 10 as shown in the photo.

Brass Wing Nut 1/4" UNFUsed on Series 109 V8 Battery Hold Down and Other Battery Hold-Downs with UNF J-Hooks. For the BSF Threaded version, see FS-...

Screw 1/4" UNF Flat Ctr-Sunk Slot for Speedo Pinion Hsg

Clamp for Spare Wheel on Bonnet 3/8" Hole,This only works with the original 3/8" Bolt 301274 - Call us if required.

Rubber Washer for Tropical Roof Spacer at Stiffiners, 8 Req'd

Rubber Washer for Tropical Roof Spacer at Sides OEM, 10or14 Req'd.

Stud Plate for Sill Channel to Bulkhead Series 2 and 3 You are purchasing 1 Stud Plate

Split Cotter Pin 3/64" x 3/4" for Series 1 Solex Carburetor, Oil Strainer, Door Check Strap Clevis Pin, RRC Accelerator Pedal and Various Other Use...

Hold-Down Clips for Bonnet Canvas Strip Series 3 (10 required)

Clip for Plastic Grill on Series 32 Required.

Split Cotter Pin for Tailgate Chain Clevis Pin, Bonnet Prop Rod, or 4WD Selector Lever.Series 1 to 3.Supersedes FS-2389 and FS-3958. 1/16" x 1/2", ...

Screw #6-20 x 3/8" Slotted Pan Head Stainless Various Uses

Nut Hex #8-32 Stainless Steel Various Uses

Machine Screw Pan-Head Slot #8-32" x 3/4" SS Various Uses.

Spire Nut for Center Lid Seat Box on Defender

Battery Hold-Down J-Clamp Rod for Series Battery Boxes.7-1/2" Long Total, 5-3/4" to Thread.Requires BSF Threaded Wing Nut FS-250431 (linked below)....

Special Screw for Radiator Fan Cowl Series 2-3

Drive Screw for Fixing Brake Clips & Various Uses. Note: You are purchasing 1, not 5 as shown in the photo.

Screw 2BA x 1/2" for Series 2/2a Dash and Various Uses OEM Also for Fuel Cover Plate to Filler Series 2-2a.

Screw Rnd-Hd Slot 8/32" x 1/2" (Alt: to 4BA) for Various Uses

Stainless Steel Slotted Pan-Hd Self-Tap Screws S1 Door Seals

Screw Pan-Head Slot 2BA x 3/8" for Various Uses. OEM. Note: You are purchasing 1, not 25 as shown in the photo.

Screw 2BA x 1" Slotted Round Head OEM For BG-304125 Buffer, TS-MXC4657 (348430) Stud and Various other usesFor the matching 2BA nut, see FS-RTC608.

Round Head Slotted 1/4"-28 UNF Bolt for Various Uses. Note: You are purchasing 1, not 10 as shown in the photo.

Slotted Truss Head 1/4"-20 x 5/8" UNC Bolt Floor to Footwells

Bolt 1/4" UNF x 11/16" Round Truss Head Slotted.For Floor Panels to Sills and other uses, OEM.Series and Defender.Note: You are purchasing 1, not 1...

Spire Nut for Front Grill Badge, Seat Box and Various Uses.For Series 2-3.

Screw 1/4-28 x 7/8" SS for Seat Base & LgtWht Door Hinge

Drive Screw for Rear Sliding Window Catch Series 2-3

Drive Screw for Front Sliding Window Catch Series 2-3

Stainless Steel Screw for Radiator Shroud, Seats and other uses.#10 x 5/8" Pan-Head Slotted, Type B point.For Series 1-3.

Stainless Steel Screw for Name Plate and Grill.#10 x 3/4" Slotted Pan Head Type B Point.For Series 2 and 2a.

Screw Fixing Plastic Grill Series 3

Screw Fixing Plastic Grill Series 3 Zinc

Screw for Brake Switch Plate on Series 3 Bracket with Servo

Screw for Fastening Speedometer Cable to Gearbox2BA x 1/4". Series 1-3. Typically 3 Required. You may need the Lock Washer, FS-WM702001L.NOTE: You ...

Bolt for Transfer Boot Retainer Bracket to Floor OEM.For Series 1-3, and Defender to 1986.

Plastic Nut Sert for S3/90/110 Head Light Bezel to Front Wing. OEM.The screw required when mounting the Head Light Bezel is FS-AB608047L.

Rivet Plastic for Body Trim Panels Various Note: You are purchasing 1, not 10 as shown in the photo.

Blind Insert Nut 2-BA Genuine LR

Blind Insert Nut 1/4" UNF Various Applications/Uses OEM. Note: You are purchasing 1, not 10 as shown in the photo.

Stainless Steel Screw Pan Head Slotted Drive #4-24 x 3/8" for Various Uses.Used on Series 1 to 3 Glass Retainers.

Screw #6 x 1/4" Phillips Round Head for 2.25L Crank Mudshield.