Service & Hardware

Bolt Flanged Head M8 x 50mm.Various Uses, OEM.

Spacer for Door Striker Defender OEM.You are purchasing 1, not 5 as shown in the photo.

Castrol Classic Window Service Sticker Self-Adhesive.3" Diameter. Never forget to change your oil with this self-cling window sticker with Castrol ...

Castrol Classic EP90 API GL4 Extreme Pressure Gear Oil 1Litre.Finally! The Right GL4 Gear Oil for your Landie!For Series 1 to 3, 1948-84, Gearbox, ...

Oil Filter Element and Seal.For Defender Puma Tdci 2.4L and 2.2L Up to VIN:DA444246 (2013).

Oil Filter Element and Seal.For Defender Puma Tdci 2.4L and 2.2L Up to VIN:DA444246 (2013).

Bolt Kit for 300Tdi Water Pump - 8 Bolts.Fits Defender, Discovery 1, and RRC 300Tdi.

Bolt Short for 300Tdi Water Pump M8x30 and Other Uses.For a kit of all 8 required bolts, see EC-3BCR248.

Bonnet Prop Arm Folding Type for DefenderOEM. Made in the UK.

Steering Drop Arm Ball Joint Remove and Fit Tool for Defender.Fit and remove SC-RBG000010 to a Defender drop arm without having to remove the arm f...

Bolt for Caliper M12 x 35mm.Fits Defender Front and Rear, Discovery 1, Discovery 2, RRC, and RR-P38.Check your application before ordering.Supersed...

Bolt For Disc (Rotor) to Hub Defender, RRC, D1 OEM.Normally 5 required per side.Supersedes: BN-AFU1180, BN-FTC1368, BN-UYG500030.

Castrol® GTX® Ultraclean 5W-30 5 Litre Jug.The Perfect Engine Oil for your Land Rover V8 Engine.Castrol® GTX® Ultraclean 5W-30 is a synthetic blend...

Wakefield Diesel Engine Oil 5W-40 5 Litre Jug.For the Defender 2.5NA, 2.5TD, 200Tdi, 300Tdi, TD5 and TDCi Puma Engines.Wakefield Diesel Engine Oil ...

Castrol GTX Classic 20W50 Conventional Engine Oil 5 Litre Jug.For Series 1 to 3, 1.6L, 2.0L, 2.25L, 2.6L Gas and Diesel Engines.Castrol® GTX® Class...

Bolt for Anti-Roll Bar (also called a Sway Bar) to Ball Joint Rear for Defender 110/130.Requires Metal-Lock Nut BN-NV116041L and Washers SS-RYF5001...

Premium Service Kit for 200Tdi Oil, Air, Fuel Filters, Washers.Name Brand OEM Filters.

Stud for the Intake Manifold to the Exhaust Manifold,For the 2.25L Gas Engine, Series 2, 2a and 3.4 Required. For a Complete Kit with Bolts, Nuts, ...

Push Fastener for Dash Trim Defender Slate-Grey Land Rover Genuine.

Bolts, Nuts and Washers for the Bulkhead to the Chassis.Fits Series 1 to 3, 1948-84.

These top hat supports are for the underside of your bonnet on a Series 2 and 3.They are made from 1.2mm thick zintec coated mild steel, which are ...

Special Socket Tool for Gearbox Mainshaft Nut Series2-3

Stainless Steel Bolt Kit for Bonnet Hinges.For Series 3 and Defender.

Bolt 3/8" UNF x 4.5" Hex Cap Zinc 3/8"-24 x 4-1/2"

Bolt 3/8" UNF x 1.25" Hex Cap Zinc 3/8"-24 x 1-1/4"

Barrel Locks & Keys 2 Sets for Series 3, Defender Anti-Burst Pull-Up Door Handles. Matched Keys.

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: 2A626646, (2002 onwards).

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: XA159807 to 2A626645, (1999-2002).For later Defender see SS...

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: LA930456 to WA159806, (1994-98). RRC 1992-94.For later Defe...

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender up to KA930455 (1993.)For later Defender see SS-DA7200.

Bolt Kit Rear Suspension Trailing Arms and A-Frame Bolts.For Defender up to VIN: 9Axxxxxx (2009), Discovery 1, and RRC. For Imperial Bushings.For l...

Bolt Kit Rear Suspension Trailing Arms and A-Frame Bolts.For Defender from VIN: 9Axxxxxx (2009). For Metric Bushings.For earlier Defender see SS-DA...

Retainer Sealing Ring for Cylinder Head CoverFor Defender 2.4Tdci 2007-2011.OEM Corteco. 4 Typically Required when Changing the Rocker Valve Cover ...

Rocker Camshaft Valve Cover Gasket SealFor Defender Puma 2.4Tdci 2007-2011, OEM.Made in Great Britain.

Premium Service Kit for Defender 2.4L and 2.2L Puma 2007 to DA444246 Includes Name Brand / OEM Oil, Fuel and Air Filters, plus Oil Drain Plug with ...

Fastener for Fan Shroud Retainer Defender 1987-2016Also called a Dzus fastener... which means a turnlock fastener.6 normally required, but typicall...

Spring Clip for Tools behind Front Seats Series 1-3, Extra-Large.Holds tools with a diameter up to 1"; just a little larger than the standard one.Y...

Nutsert M6 for Mud Flaps to Chassis Rail and VariousLand Rover Genuine

Chain Galvanized for Tailgate 28mm 20-Links Series/Defender. OEM.

Cotter Pin for Bottom of Shock Absorbers and Other UsesSeries 2-3 OEMAlso used for holding the rear Tailgate hinge in place.

Hose Clamp 1/2" - 1-1/4" Diameter x 1/2" Bandwidth Stainless Various Uses

Slotted Drain Plug Tool for Series, Defender, and RRC.Uses a 19mm or 3/4" Socket or Wrench.For use on the Slotted Drain Plug, AF-235592.So much eas...

Wings to Breakfast Radiator Panel Stud Plate Kit For Series 2-3. Galvanized Plates with Stainless Steel Studs, Nuts and Washers.Includes 2x BP-MRC5...

Bonnet Catch Assembly for Series 2-3.OEM. Not for 109 V8For the Bonnet Striker Plate see BP-332400 (linked below).

Bonnet Striker Plate for Series 2-3.For the Bonnet Catch Assembly, see BP-332401.

Timing Tool Kit 12-PieceFor 2.5L NA, 2.5TD, 200TDI, and 300TDI. Defender, Discovery 1 and RRC.

Nut M12-1.75 Metric Nyloc for Shocks, Axle U-Bolts, Various UsesYou are purchasing 1, not 10 as shown in the photo.

Washer Flat M8 Zinc for Various UsesFor Defender Check Straps.