Service & Hardware

Locker Plate for Spring U-Bolts (For 2.5" Narrow Springs).For Series 1 to 2a, 1952-64 with the Early Narrow 2.5" Wide Leaf Springs.New Old Stock - ...

Stud M8 x 35mm Injector to Cylinder Head, Inlet Manifold, and other Various Uses.For Defender.

Hose Clamp 3/4" - 1-5/8" Diameter x 1/2" Bandwidth.All Stainless - Various Uses.

Air Filter LR3 and RRS L320

Filter Element for Pollen Air Intake LR3, LR4, RRS L320

Clamp for Bonnet Spare Wheel Carrier Series 1-31/2" Hole for Bolt BN-345779 (linked below).

Hose Clamp 1-1/4" - 2-1/4" Diameter x 1/2" Bandwidth Stainless Various Uses

Bolt 7/16"UNF x 2.25" Grade 8 Yellow Zinc.For Upper or Lower Arm to Steering Relay.Series 2 to 3, 1958-84.Supersedes BN-215390, (BSF) and BN-256465...

Nut Nylon Lock 7/16" UNF Grade 8.For Upper or Lower Steering Arms to Relay, and Shock Bolts.Series 2 to 3, 1958-84.

Bolt Flanged Head M8 x 50mm.Various Uses, OEM.

Spacer for Door Striker Defender OEM.You are purchasing 1, not 5 as shown in the photo.

Castrol Classic Window Service Sticker Self-Adhesive.3" Diameter. Never forget to change your oil with this self-cling window sticker with Castrol ...

Castrol Classic EP90 API GL4 Extreme Pressure Gear Oil 1Litre.Finally! The Right GL4 Gear Oil for your Landie!For Series 1 to 3, 1948-84, Gearbox, ...

Oil Filter Element and Seal.For Defender Puma Tdci 2.4L and 2.2L Up to VIN:DA444246 (2013).

Oil Filter Element and Seal.For Defender Puma Tdci 2.4L and 2.2L Up to VIN:DA444246 (2013).

Bolt Kit for 300Tdi Water Pump - 8 Bolts.Fits Defender, Discovery 1, and RRC 300Tdi.

Bolt Short for 300Tdi Water Pump M8x30 and Other Uses.For a kit of all 8 required bolts, see EC-3BCR248.

Bonnet Prop Arm Folding Type for DefenderOEM. Made in the UK.

Steering Drop Arm Ball Joint Remove and Fit Tool for Defender.Fit and remove SC-RBG000010 to a Defender drop arm without having to remove the arm f...

Bolt for Caliper M12 x 35mm.Fits Defender Front and Rear, Discovery 1, Discovery 2, RRC, and RR-P38.Check your application before ordering.Supersed...

Bolt For Disc (Rotor) to Hub Defender, RRC, D1 OEM.Normally 5 required per side.Supersedes: BN-AFU1180, BN-FTC1368, BN-UYG500030.

Castrol® GTX® Ultraclean 5W-30 5 Litre Jug.The Perfect Engine Oil for your Land Rover V8 Engine.Castrol® GTX® Ultraclean 5W-30 is a synthetic blend...

Wakefield Diesel Engine Oil 5W-40 5 Litre Jug.For the Defender 2.5NA, 2.5TD, 200Tdi, 300Tdi, TD5 and TDCi Puma Engines.Wakefield Diesel Engine Oil ...

Castrol GTX Classic 20W50 Conventional Engine Oil 5 Litre Jug.For Series 1 to 3, 1.6L, 2.0L, 2.25L, 2.6L Gas and Diesel Engines.Castrol® GTX® Class...

Bolt for Anti-Roll Bar (also called a Sway Bar) to Ball Joint Rear for Defender 110/130.Requires Metal-Lock Nut BN-NV116041L and Washers SS-RYF5001...

Premium Service Kit for 200Tdi Oil, Air, Fuel Filters, Washers.Name Brand OEM Filters.

Stud for the Intake Manifold to the Exhaust Manifold,For the 2.25L Gas Engine, Series 2, 2a and 3.4 Required. For a Complete Kit with Bolts, Nuts, ...

Push Fastener for Dash Trim Defender Slate-Grey Land Rover Genuine.

Bolts, Nuts and Washers for the Bulkhead to the Chassis.Fits Series 1 to 3, 1948-84.

These top hat supports are for the underside of your bonnet on a Series 2 and 3.They are made from 1.2mm thick zintec coated mild steel, which are ...

Special Socket Tool for Gearbox Mainshaft Nut Series2-3

Stainless Steel Bolt Kit for Bonnet Hinges.For Series 3 and Defender.

Bolt 3/8" UNF x 4.5" Hex Cap Zinc 3/8"-24 x 4-1/2"

Bolt 3/8" UNF x 1.25" Hex Cap Zinc 3/8"-24 x 1-1/4"

Barrel Locks & Keys 2 Sets for Series 3, Defender Anti-Burst Pull-Up Door Handles. Matched Keys.

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: 2A626646, (2002 onwards).