Service & Hardware

Bolt for Anti-Roll Bar (also called a Sway Bar) to Ball Joint Rear for Defender 110/130.Requires Metal-Lock Nut BN-NV116041L and Washers SS-RYF5001...

Premium Service Kit for 200Tdi Oil, Air, Fuel Filters, Washers.Name Brand OEM Filters.

Stud for the Intake Manifold to the Exhaust Manifold,For the 2.25L Gas Engine, Series 2, 2a and 3.4 Required. For a Complete Kit with Bolts, Nuts, ...

Push Fastener for Dash Trim Defender Slate-Grey Land Rover Genuine.

Bolts, Nuts and Washers for the Bulkhead to the Chassis.Fits Series 1 to 3, 1948-84.

These top hat supports are for the underside of your bonnet on a Series 2 and 3.They are made from 1.2mm thick zintec coated mild steel, which are ...

Special Socket Tool for Gearbox Mainshaft Nut Series2-3

Stainless Steel Bolt Kit for Bonnet Hinges.For Series 3 and Defender.

Bolt 3/8" UNF x 4.5" Hex Cap Zinc 3/8"-24 x 4-1/2"

Bolt 3/8" UNF x 1.25" Hex Cap Zinc 3/8"-24 x 1-1/4"

Barrel Locks & Keys 2 Sets for Series 3, Defender Anti-Burst Pull-Up Door Handles. Matched Keys.

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: 2A626646, (2002 onwards).

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: XA159807 to 2A626645, (1999-2002).For later Defender see SS...

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender from VIN: LA930456 to WA159806, (1994-98). RRC 1992-94.For later Defe...

Bolt Kit for Front Suspension, Radius Arms and Panhard Rod Bolts.For Defender up to KA930455 (1993.)For later Defender see SS-DA7200.

Bolt Kit Rear Suspension Trailing Arms and A-Frame Bolts.For Defender up to VIN: 9Axxxxxx (2009), Discovery 1, and RRC. For Imperial Bushings.For l...

Bolt Kit Rear Suspension Trailing Arms and A-Frame Bolts.For Defender from VIN: 9Axxxxxx (2009). For Metric Bushings.For earlier Defender see SS-DA...

Retainer Sealing Ring for Cylinder Head CoverFor Defender 2.4Tdci 2007-2011.OEM Corteco. 4 Typically Required when Changing the Rocker Valve Cover ...

Rocker Camshaft Valve Cover Gasket SealFor Defender Puma 2.4Tdci 2007-2011, OEM.Made in Great Britain.

Premium Service Kit for Defender 2.4L and 2.2L Puma 2007 to DA444246 Includes Name Brand / OEM Oil, Fuel and Air Filters, plus Oil Drain Plug with ...

Fastener for Fan Shroud Retainer Defender 1987-2016Also called a Dzus fastener... which means a turnlock fastener.6 normally required, but typicall...

Spring Clip for Tools behind Front Seats Series 1-3, Extra-Large.Holds tools with a diameter up to 1"; just a little larger than the standard one.Y...

Nutsert M6 for Mud Flaps to Chassis Rail and VariousLand Rover Genuine

Chain Galvanized for Tailgate 28mm 20-Links Series/Defender. OEM.

Cotter Pin for Bottom of Shock Absorbers and Other UsesSeries 2-3 OEMAlso used for holding the rear Tailgate hinge in place.

Hose Clamp 1/2" - 1-1/4" Diameter x 1/2" Bandwidth Stainless Various Uses

Slotted Drain Plug Tool for Series, Defender, and RRC.Uses a 19mm or 3/4" Socket or Wrench.For use on the Slotted Drain Plug, AF-235592.So much eas...

Wings to Breakfast Radiator Panel Stud Plate Kit For Series 2-3 Includes 2x BP-MRC5519, 2x BP-MRC5520, 10x M6 Flat Washers, 10x M6 - 80 Flanged Ser...

Bonnet Catch Assembly for Series 2-3.OEM. Not for 109 V8For the Bonnet Striker Plate see BP-332400 (linked below).

Bonnet Striker Plate for Series 2-3.For the Bonnet Catch Assembly, see BP-332401.

Timing Tool Kit 12-PieceFor 2.5L NA, 2.5TD, 200TDI, and 300TDI. Defender, Discovery 1 and RRC.

Nut M12-1.75 Metric Nyloc for Shocks, Axle U-Bolts, Various UsesYou are purchasing 1, not 10 as shown in the photo.

Washer Flat M8 Zinc for Various UsesFor Defender Check Straps.

Rivets Spat for Wheel Arches Defender and Various Uses Package of 10For Re-Usable Rivets see BP-AFU1075RU10.

Re-Usable Rivets for Wheel Arches Defender & Various UsesA Better Fit, Easier Installation and these are Removal and Re-Usable.Package of 10. T...

Cylinder Head Overhaul Kit for Series 3 1975 on, 2.25L GasEverything needed to do a Valve Job.

Cylinder Head Overhaul Kit for Series 2, 2a, 3 up to 1974, 2.25L GasEverything needed to do a Valve Job.

Timing Kit for 300Tdi Defender, Discovery 1, RRCTensioner, Gasket, Outer Seals, (1 for up to VA560898 and 1 for VA560897 on), and OEM Belt.

Timing Kit for 2.5D & 2.5TD DefenderOEM Tensioner, Belt, and Gaskets. OEM.

Pop-Rivet Aluminium. 3/16"x1/2" Maximum Clinch 9/32" Sealed EndPackage of 10

Support for Door Striker Right Hand Series 2 to 3 109", and all Defenders. For the Left Hand Support Bracket, see BP-MWC1737.

Pop-Rivet Aluminium. 3/16"x1/2" Maximum Clinch 9/32" Sealed End, Aluminium Stem. For a Package of 10, see RV-78248-10 (linked below).

Clutch Alignment Tool Series 1-3 for 9" & 9.5" Clutch Plates

Set Screw Metric M8 x 40mm Pan-Head For Bonnet Buffer Defender, OEM You are purchasing 1 screw not 10 as shown

Stud 7/16" BSF for Bottom of Swivel Housing Series 2a-34 Required on Top from Feb 1962 to '66, or use later alternative Bolt, BN-237357.2 required ...

Special Stud For Swivel Housing 7/16"BSF Series 2a-3This Stud has a thicker non-threaded center. 4 Required for Top, February 1962-66. 2 required o...

Stud for Gearbox Brackets on Transfer Case Series 1-3 7/16" Whitworth and 7/16" BSF. Requires Nut BN-2096.

Tailgate Hinge Kit for Series or Defender Bolt to Rear-Cross OEM