Series Body Hardware

Battery Hold-Down J-Clamp Rod for Series Battery Boxes.7-1/2" Long Total, 5-3/4" to Thread.Requires BSF Threaded Wing Nut FS-250431 (linked below)....

Wing Nut for Battery J-Clamp Rod, Air Cleaner Clamp 1/4" BSF Thread. OEM.Note: You are purchasing one, not 10 as shown in the photo.

Locker Plate for Spring U-Bolts .For Series 1, 1948-51 with the Early Narrow 2.5" Wide Leaf Springs, (Supersedes SS-217261); and Series 1 to 2a, 19...

Bolt Kit for Front Stub Axle to Swivel Hub. This is an Axle Set; does both Left- and Right-Hand Sides. For Series 1-3, 1948-84.

Rope Tie-Down (U-shape) on Rear Tub for Canvas Top. OEM.Zinc Coated. For Series 1-3 and Defender. Requires 2 Rivets, RV-RU612373.

Bolt Kit for Seal Retainer to Swivel Hub.This is an Axle Set; does both Left and Right Hand Sides.Series 1 to 3, 1948-84.

Bolt for Bonnet Spare Wheel Carrier Mounting. OEM.1/2" BSF x 3" Long. Works with Clamp BP-347262.

Tailgate Hinge Kit for Series or Defender Bolt to Rear-Cross. OEM.

Screw 2BA x 1/2" for Series 2/2a Dash and Various Uses OEM Also for Fuel Cover Plate to Filler Series 2-2a.

Set of 3 Replacement Rubber Grommets for Series 1 1953-58. Handbrake, Gear, and Transfer Lever. Note: Handbrake has a Round Hole for Round Shaft an...

Stud Plate for Sill Channel to Bulkhead Series 2 and 3 You are purchasing 1 Stud Plate

Clamp Arm (Claw Hook) for Securing Hoop Stick to Tub.For Series 1-3 and Defender.

Floor Screw Acme Thread Series 1-3 and DefenderFor a Package of 10 Floor Screws see FS-320045-10 (linked below left), or a Package of 10 Screws and...

Washer Spring Lock 5/16" Medium-Split Yellow-Zinc.For Various Uses.

Bonnet Fastener Hook Kit Pair Including Bonnet Catches. For Series and Military. Quality Aftermarket Re-Production Set. Zinc Plated Hooks with Zinc...

Pair of Brackets for the Front Wings to Bulkhead. Series 2-2a, 1958-71. Includes Right-Hand BP-338652, and Left-Hand BP-338653. Hot-Dip Galvanized....

Bolt M6-1.0 x 20mm Stainless Steel Pan-Head Phillips.For Series 3 and Defender Mirror Arms to Hinges, (2 Required per Door/Mirror).You are purchasi...

Bolt for Seat Belt at Seat Box Anchor Bracket.For Series 2a and 3. Fastens the Seat Belt to the Lower Corner Brackets, SB-345100/1.Note: Typically ...

Split Cotter Pin 3/64" x 3/4" for Series 1 Solex Carburetor, Oil Strainer, Door Check Strap Clevis Pin, RRC Accelerator Pedal and Various Other Use...

Clevis Pin for Tailboard Chain.For Series 1-3.This Requires Split Cotter Pin FS-3958L (linked below).

Seat Belt Anchor Bracket Front Lower Right and Left Hand, PAIR.Hot-Dip Galvanized. For Series 1-3, and Defender.

Screw for L798 Reverse Lamp.For Late Series 2a and Series 3.2 Required per lamp.

Bolt 3/8" BSF x 1-3/8" for Swivel Lock Stop, Rear Brake Plate/Stub Axle, Lower Steering Arms to Swivel Housing up to '66, and Series 1 Flywheel Hou...

Bolt Kit for Swivel Ball Flange to Axle.This is an Axle Set; does both Left and Right Sides.Series 1-3, 1948-84.

Door Lock Cylinder Barrels and Keys, 2 Sets, with Matched Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Door t...

Bonnet Catch Assembly for Series 2-3. OEM. Not for 109 V8 For the Bonnet Striker Plate see BP-332400 (linked below).

Nut 2BA Thread for Accelerator Rod Ball Joints and Various Other Uses.Supersedes FS-2247 and FS-3823.Note: You are purchasing 1, not 10 as shown in...

Stud 7/16" BSF for Bottom of Swivel Housing Series 2a-34 Required on Top from Feb 1962 to '66, or use later alternative Bolt, BN-237357.2 required ...

Stud for Gearbox Brackets on Transfer Case Series 1-3 7/16" Whitworth and 7/16" BSF. Requires Nut BN-2096.

Plastic Lokut Nut Floor to Footwell and Other Uses OEM, Made in the UK.Please note, you are purchasing 1, not 10 as shown in the photo.Supersedes F...

Screw for Fuel Sender Unit 3BAx3/8" 6 Required Note: These only fit Original Tanks. New Fuel Tanks may require Metric M4x16 or SAE 6-40.

Hinge for Bonnet Left Hand Genuine Land Rover Galvanized Series 3 1972-84 For Right-Hand Hinge, see BP-345853 (linked below).

Hinge for Bonnet Right Hand Genuine Land Rover Galvanized Series 3 1972-84 For Left-Hand Hinge, see BP-345854 (linked below).

Seat Box Hasp for Locker Lid Series 2-3 1958-84 Short Hasp

Door Lock Cylinder Barrels and Keys, 4 Sets, with 8 Matching Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Doo...

Nut Plate for Defender Roof, (6 Required - Front of Roof to Windscreen), or Bench Seat Belts Series 1-3.Supersedes BP-334177 and BP-MTC3203.Note: Y...