Skip to content

Series Body Hardware

Filters

  • $30.10 - $30.10
    $30.10
    $30.10 - $30.10
    $30.10

    Barrel Locks & Keys 2 Sets for S3 Anti-Burst, Defender to '01

    Door Lock Cylinder Barrels and Keys, 2 Sets, with Matched Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Door t...

    View full details
    $30.10 - $30.10
    $30.10
    $30.10 - $30.10
    $30.10
  • $288.68 - $288.68
    $288.68
    $288.68 - $288.68
    $288.68

    Bonnet Catch Assembly Series 2-3 OEM

    Bonnet Catch Assembly for Series 2-3. OEM. Not for 109 V8 For the Bonnet Striker Plate see BP-332400 (linked below).

    $288.68 - $288.68
    $288.68
    $288.68 - $288.68
    $288.68
  • $1.23 - $1.23
    $1.23
    $1.23 - $1.23
    $1.23

    Nut 2BA for Accelerator Rod Ball Joints & Various Uses

    Nut 2BA Thread for Accelerator Rod Ball Joints and Various Other Uses.Supersedes FS-2247 and FS-3823.Note: You are purchasing 1, not 10 as shown in...

    View full details
    $1.23 - $1.23
    $1.23
    $1.23 - $1.23
    $1.23
  • $4.13 - $4.13
    $4.13
    $4.13 - $4.13
    $4.13

    Stud 7/16" BSF for Bottom of Swivel Housing Series 2a-3

    Stud 7/16" BSF for Bottom of Swivel Housing Series 2a-34 Required on Top from Feb 1962 to '66, or use later alternative Bolt, BN-237357.2 required ...

    View full details
    $4.13 - $4.13
    $4.13
    $4.13 - $4.13
    $4.13
  • $4.27 - $4.27
    $4.27
    $4.27 - $4.27
    $4.27

    Stud for Gearbox Brackets on Transfer Case Series 1-3

    Stud for Gearbox Brackets on Transfer Case Series 1-3 7/16" Whitworth and 7/16" BSF. Requires Nut BN-2096.

    $4.27 - $4.27
    $4.27
    $4.27 - $4.27
    $4.27
  • $1.52 - $1.52
    $1.52
    $1.52 - $1.52
    $1.52

    Plastic Lokut Nut Floor to Footwell & Def Grill (RTC3744) OEM

    Plastic Lokut Nut Floor to Footwell and Other Uses OEM, Made in the UK.Please note, you are purchasing 1, not 10 as shown in the photo.Supersedes F...

    View full details
    $1.52 - $1.52
    $1.52
    $1.52 - $1.52
    $1.52
  • $3.62 - $3.62
    $3.62
    $3.62 - $3.62
    $3.62

    Screw for Fuel Sender Unit 3BAx3/8" 6 Reqd

    Screw for Fuel Sender Unit 3BAx3/8" 6 Required Note: These only fit Original Tanks. New Fuel Tanks may require Metric M4x16 or SAE 6-40.

    $3.62 - $3.62
    $3.62
    $3.62 - $3.62
    $3.62
  • $14.21 - $14.21
    $14.21
    $14.21 - $14.21
    $14.21

    Hinge for Bonnet LH Genuine LR Galv Series 3 1972-84

    Hinge for Bonnet Left Hand Genuine Land Rover Galvanized Series 3 1972-84 For Right-Hand Hinge, see BP-345853 (linked below).

    $14.21 - $14.21
    $14.21
    $14.21 - $14.21
    $14.21
  • $15.94 - $15.94
    $15.94
    $15.94 - $15.94
    $15.94

    Hinge for Bonnet RH Genuine LR Galv Series 3 1972-84

    Hinge for Bonnet Right Hand Genuine Land Rover Galvanized Series 3 1972-84 For Left-Hand Hinge, see BP-345854 (linked below).

    $15.94 - $15.94
    $15.94
    $15.94 - $15.94
    $15.94
  • $32.91 - $32.91
    $32.91
    $32.91 - $32.91
    $32.91

    Seat Box Hasp for Locker Lid Series 2-3 1958-84 Short Hasp

    Seat Box Hasp for Locker Lid Series 2-3 1958-84 Short Hasp

    $32.91 - $32.91
    $32.91
    $32.91 - $32.91
    $32.91
  • $54.38 - $54.38
    $54.38
    $54.38 - $54.38
    $54.38

    Barrel Locks & Keys 4 Sets for S3 Anti-Burst, Defender to '01

    Door Lock Cylinder Barrels and Keys, 4 Sets, with 8 Matching Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Doo...

    View full details
    $54.38 - $54.38
    $54.38
    $54.38 - $54.38
    $54.38
  • $9.15 - $9.15
    $9.15
    $9.15 - $9.15
    $9.15

    Nut Plate for Roof 90/110 or Bench Seat Belts Series1-3

    Nut Plate for Defender Roof, (6 Required - Front of Roof to Windscreen), or Bench Seat Belts Series 1-3.Supersedes BP-334177 and BP-MTC3203.Note: Y...

    View full details
    $9.15 - $9.15
    $9.15
    $9.15 - $9.15
    $9.15
  • $47.04 - $47.04
    $47.04
    $47.04 - $47.04
    $47.04

    Barrel Locks & Keys 3 Sets for S3 Anti-Burst, Defender to '01

    Door Lock Cylinder Barrels and Keys, 3 Sets, with 6 Matching Keys.For Series 3 Anti-Burst Handles, Defender Push-Button Handles and Rear Safari Doo...

    View full details
    $47.04 - $47.04
    $47.04
    $47.04 - $47.04
    $47.04
  • $30.00 - $30.00
    $30.00
    $30.00 - $30.00
    $30.00

    Set of 3 Stainless Steel Door Hinge Pin Kits S2-3 /90/110

    Set of 3 Stainless Steel Door Hinge Pin Kits For Series 2-3 or Defender 3-Hinge Rear Safari Door

    $30.00 - $30.00
    $30.00
    $30.00 - $30.00
    $30.00
  • $4.49 - $4.49
    $4.49
    $4.49 - $4.49
    $4.49

    Bearing Grease 20ml Sachet for Hub Bearings

    Bearing Grease 20ml Sachet for Hub Bearings

    $4.49 - $4.49
    $4.49
    $4.49 - $4.49
    $4.49
  • $27.31 - $27.31
    $27.31
    $27.31 - $27.31
    $27.31

    Bonnet Canvas Strip Series 1-3 1948-1984 (White Canvas)

    White Canvas Strip Only, Series 1-3, 1948-1984, (White Canvas).For Breakfast (Front Grill), under Bonnet (Hood).You will need fasteners FS-338380 (...

    View full details
    $27.31 - $27.31
    $27.31
    $27.31 - $27.31
    $27.31
  • $1.55 - $1.55
    $1.55
    $1.55 - $1.55
    $1.55

    Nut for Brake Hose S3, Def, D1, RRC Metric 10mm 1.00 Thrd

    Brake Hose Nut Metric 10mm Zinc Series 3, June 1980-84

    $1.55 - $1.55
    $1.55
    $1.55 - $1.55
    $1.55
  • $12.62 - $12.62
    $12.62
    $12.62 - $12.62
    $12.62

    Bolt 7/16" UNF 7 1/4" for Shock Absorber Rear 109, 1958-84

    Bolt 7/16" UNF 7 1/4" for Shock Absorber Rear 109, 1958-84. OEM.

    $12.62 - $12.62
    $12.62
    $12.62 - $12.62
    $12.62
  • $26.15 - $26.15
    $26.15
    $26.15 - $26.15
    $26.15

    Special Set Bolt 7/16" UNF x 7/8" Flywheel to Crank

    Special Set Bolt for Flywheel to Crank 2.25L 3-Bearing Engines and the 2.6L, Series 2-3.8 Typically Required. For the Locker Plates, see CC-534098.

    $26.15 - $26.15
    $26.15
    $26.15 - $26.15
    $26.15
  • $109.99 - $109.99
    $109.99
    $109.99 - $109.99
    $109.99

    Rear Crossmember Plate and Bolt Kit for Series and Defender

    Rear Cross-Member Plates and Bolts Fastening Kit for Series and Defender to 2002. Includes 5x BP-YRM097A, (BP-MRC8736), Aluminium Nut Plates, 10x S...

    View full details
    $109.99 - $109.99
    $109.99
    $109.99 - $109.99
    $109.99
  • $7.63 - $7.63
    $7.63
    $7.63 - $7.63
    $7.63

    Bolt 1/2" UNF for Bulkhead to Frame 1958-84

    Bolt 1/2" UNF for Bulkhead to Frame.For Series 1 to 3, 1948-84. OEM.Supersedes BN-300827 and BN-303907, (BSF Versions of the same size bolt), no lo...

    View full details
    $7.63 - $7.63
    $7.63
    $7.63 - $7.63
    $7.63
  • $34.46 - $34.46
    $34.46
    $34.46 - $34.46
    $34.46

    Bolt Kit for Series 2, 2a and 3 RH and LH Splash Guards

    Bolt Kit for Series 2, 2a and 3, 1969 to 84, Right and Left Hand Mud Shield Splash Guards. Correct Fasteners for Doing Both Sides for LHD and RHD. ...

    View full details
    $34.46 - $34.46
    $34.46
    $34.46 - $34.46
    $34.46
  • $2.48 - $2.48
    $2.48
    $2.48 - $2.48
    $2.48

    Stud for Inspection Cover on Flywheel Hsg Series 1-3 1956-84

    Stud for Inspection Cover on Flywheel Housing Series 1-3 1956-84.

    $2.48 - $2.48
    $2.48
    $2.48 - $2.48
    $2.48
  • $14.67 - $14.67
    $14.67
    $14.67 - $14.67
    $14.67

    Special Bolt Long BSF for Rover Differential in Axle S1-2a

    Special Bolt Long BSF for Rover Differential in Axle Case.Series 1-2a.3/8"BSFx 1-3/4" Hex Fully-Threaded. Typically 6 Required.For the Matching BSF...

    View full details
    $14.67 - $14.67
    $14.67
    $14.67 - $14.67
    $14.67